The fact that the Dura-Ace pads are used widely by the top cycling teams should speak to their quality, even if they are supplied for free!

The calipers, cable housing, and brake levers all have a role in determining how a braking system performs but it is the pads that have the greatest single effect. For this guide we've split the pads into two sections: alloy rims and carbon rims;

You can trust Cycling Weekly. Our team of experts put in hard miles testing cycling tech and will always share honest, unbiased advice to help you choose. Find out more about how we test.

The standard PVD coating creates a low coefficient of friction with a high-service-temperature range. This combination results in high wear resistance and allows for higher-speed capabilities, especially in heat-resistant alloys.

The new end mills combine a proprietary flute design with a high-performance, carbide substrate for fast and efficient material removal with less stress induced into the part, the company states. A combination of strength, toughness, and heat resistance enables machining capabilities from roughing to finishing with extended tool life and better predictability.

Created to work in both wet and dry conditions, the Dura-Ace pads are also compatible with SRAM road calipers.

Keep up to date with the latest news, events, and technology for all things metal from our pair of monthly magazines written specifically for Canadian manufacturers!

Carbon rims and aluminium alloy rims require different brake pads. For carbon rims especially, it is very important that the correct pads are used.

Cycling Weekly is part of Future plc, an international media group and leading digital publisher. Visit our corporate site. © Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.

Featuring a design that removes dirt and water before the pad hits the rim, these are good for when the weather turns bad.

This is one of the more economical ways to get Dura-Ace components on your bike. If you are going to have top-of-the-range parts anywhere on your bike, the part that controls your speed is probably the best place for it.

Although the Black Prince compound might not induce the same stomach-flipping raw deceleration as the Yellow King, it does offer superior modulation. This allows you to really get the most out of your brakes.

Since then, he’s earnt his 2ⁿᵈ cat racing licence in his first season racing as a third, completed the South Downs Double in under 20 hours and Everested in under 12.

Greenleaf Corp. has developed Greenleaf-360, a new line of high-performance solid-carbide end mills to complement the XSYTIN-360 line of solid-ceramic end mills.

After winning the 2019 National Single-Speed Cross-Country Mountain Biking Championships and claiming the plushie unicorn (true story), Stefan swapped the flat-bars for drop-bars and has never looked back.

Image

The R4 Dura featured a plow-tip design which helps remove dirt and water before the pad touches the rim. It makes these a good choice if you use your carbon rims year-round or live in a region where rain is often on the horizon.

These tools use a substrate that is capable of cutting low-carbon steel alloys and heat-resistant alloys. The submicron grade provides great toughness and wear resistance that offers machinists one grade that can be applied in many different applications.

SwissStop's nomenclature for their pads takes a second to get your head round, but it makes sense once you know it.

Designed to work across conditions, these are solid all rounder, which should deliver assured braking performance in a range of conditions. However, as you might expect Shimano's characteristics chart shows that they do perform slightly better in the dry compared to the wet.

A super soft compound might work well in the wet, but it can be a little too grabby in the dry. Using a mixed compound, or one that is designed for the dry, will improve the brake’s modulation. It's therefore easier to control the amount of braking power you’re exerting, so you don’t accidentally lock up a wheel.

If your road bike has caliper rim brakes, you'll want to fit the best rim brake pads to up your stopping power.

Carbon isn’t as good as aluminium at conducting heat, meaning that carbon rims have a greater tendency to heat up. If the rims get too hot, you risk starting to melt the resin that holds the carbon fibres together and causing your inner tubes to pop, or even a failure of the rim itself, although modern carbon rims usually use high iTg resins to make them more resistant to heat build-up.

You’re able to get right up to (but not exceed) the limits of your tires’ grip - that precise point before the wheels lock up and the tires start to skid - where you’re exerting the maximum braking force possible for the conditions.

The latest race content, interviews, features, reviews and expert buying guides, direct to your inbox!

Image

A high-quality set of brake pads, with a compound specifically formulated for the conditions, can have a transformative effect on your stopping distance.

As a USA brand, they can be a little difficult to get hold of if you're in the  UK, but a definitely worth the extra effort if your looking for a pad that can help your braking performance in less than ideal weather conditions.

Brake pads designed specifically for carbon rims are constructed to help control the amount of heat build up by sucking it away from the rim. It's important to use your brakes properly though to stop the rims heating up. Dragging your brakes on long descents is to be avoided.

Image

Arguably, this is not much of a problem. In being quite soft they are easy on the braking track, meaning that you’ll get more life out of your rims. Swapping pads a little more frequently is cheaper - and a lot easier - than rebuilding your wheels.

A softer compound will be more grippy and offer better braking - especially in the wet. However, because the compound is softer, it will wear faster than a harder compound. On the bright side, a soft compound is easier on the rims, meaning they’ll last longer before you have to replace them.

Carbon-specific brake pads shouldn’t be used on aluminium rims because they are quite soft and will wear quickly. Also, if the pads are used on aluminium rims, little bits of metal from the braking track will embed themselves in the pads. If the pads are then used on carbon rims, the metal shards will abrade the carbon and damage the rims.

Easily access valuable industry resources now with full access to the digital edition of Canadian Metalworking.

If the name has “flash” in it, the pad is good for SRAM/Shimano, if it has “race” instead then the pad is suitable for Campagnolo. “Pro” means that the pad is thicker for a longer service life. Alternatively, there is “evo” which is good if you have particularly wide rims which can only really accept pads once they are half worn.

We’ve rounded up the best rim brake pads for road bikes, if you're looking for better braking performance no matter whether it’s wet or dry?

When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works.

Easily access valuable industry resources now with full access to the digital edition of Canadian Fabricating & Welding.

A cartridge system is stiffer because the brake shoe provides extra support for the pad, making the brakes more powerful and responsive. They have the added benefit that when it comes to changing the pads, you can just pop the old pads out and slide the new ones in. You don’t need to readjust the brake position. They're the best choice for serious riding.

ISCAR is About to Change Metal Cutting…AGAIN. NEW Small 06 Square Inserts to be Mounted on Endmills for High Feed Machining

One-piece pads are cheaper to manufacture and so are often specced on lower value bikes or bikes that are trying hard to come in below a certain price point. The brakes tend to feel a little mushier and the pads tend to be made from lower performing compounds to keep the costs down.

We’ve split this guide into best brake pads for alloy rims and best brake pads for carbon rims to make it easier to find the brake pads you need. Some manufacturers require you to use only certain makes of brake pad on their rims. If you use a pad that is not recommended, you risk voiding your warranty, so it is best to double check before using a different set of pads.

For alloy rims, you then have the choice of the “Original Black” compound or “BXP”. The Original Black is recommended for general use and performs better in dry conditions. If you're after a SwissStop pad for wet weather, then its BXP compound is what you'll need.

Whether you’re slowing into a corner or pulling up at a junction, the consequences of cycling with an unreliable set of bike brakes and pads don’t bare thinking about. Better brake pads are a surprisingly cheap upgrade, especially for something that so dramatically affects both your safety and your performance.

Some brake pads come as a single brake block, whereas with others the brake pad functions as a cartridge that is inserted into a brake shoe.

They are available in four-, five-, and seven-flute configurations to perform full slotting and high-speed machining. Extended shank length options allow for effective completion of long-reach applications.

The Dura 2 is a thicker version of this pad, so even considering the wear rate, you won’t actually have to replace them that often. Other Dura compounds include black for dry riding and triple for "superb braking in all conditions".

But his favourite rides are multiday bikepacking trips, with all the huge amount of cycling tech and long days spent exploring new roads and trails - as well as histories and cultures. Most recently, he’s spent two weeks riding from Budapest into the mountains of Slovakia.

If your bike has disc brakes however, you need to read our guide to the best brake pads for road and gravel bikes.

These deliver the strong and consistent stopping power you would expect from top-flight Campagnolo pads. If you're riding vintage Campy rim brakes you'll need to look elsewhere however as these are only compatible with calipers produced from the year 2000 onwards.

These pads, designed for "extreme all weather conditions", have something of a cult following for how well they perform in the wet. The soft compound is super grippy, although that does mean they wear faster than other pads.

Perhaps surprisingly Campagnolo also produce a SRAM/Shimano version of these pads as well - so that those on the dark side can enjoy superb braking on carbon rims as well.

As with the alloy pads, the “flash” means these are for SRAM/Shimano and “pro” means the pad is thick. For carbon rims, there are two compounds to choose from, “Black Prince” and “Yellow King”. Yellow King provides a little more in terms of absolute stopping power - but what is power without control?

These are versatile pads that are designed to offer powerful and consistent braking in both the dry and the wet - although according to Shimano's own characteristics graph, there is a marked difference between performance in the dry (scored a 5)  and in the wet (scored a 2). Durability is good and as brake pads go they are easy to fit and pretty silent in all but the wettest conditions.