90-degree Square Shoulder Milling - Insert Selection - milling insert geometry

The polygon shank tool holders of the Quick Change line are designed to be compliant with the ISO 26623-1 standard for toolholding systems. As such, they can be used with any coupling system that is based on the ISO 26623-1 standard, enabling quick & easy tool changes.

A unique product line of external tool holders equipped with an internal coolant – enabling a flow of coolant to the cutting edge. This reduces the temperature of the cutting edge while machining, helping to extend the life span of the tool. Additionally, the coolant fluid aids in removal of the chips during operation – improving the cutting performance.

Tool holders for turning inserts. The holders that belong to the current line of products support only external threads/grooves.

These carbide shank bars can be used to cut internal threads/grooves. They are especially well-suited for deep small bores with a long overhang, or for use in other situations, where chatter and deflection are expected. These bars have an integrated coolant bore, which helps with chip evacuation. This helps to maximize tool performance, as well as extend the life of the insert.

Our range of grooving inserts is designed to work with standard Carmex thread turning tool holders, and deliver high-quality grooves. These inserts are manufactured using a variety of blank sizes: 6 mm (5/32″), 8 mm (3/16″), 11 mm (1/4″), 16 mm (3/8″), 22 mm (1/2″), and 27 mm (5/8″).

Tool holders for cutting internal threads/grooves. These holders improve on the basic internal tool holders by adding an integrated coolant bore. The coolant fluid helps to evacuate the chips, which helps to maximize tool performance, as well as extend the life of the insert.

Typically, one would consider using such a tool holder in case of a large-pitch thread with a relatively small diameter.

Tool holders for turning inserts. The holders that belong to the current line of products support only internal threads/grooves.

Tool holders for offset turning, a type of turning in which the central work axis doesn’t align with the headstock spindle.

The polygon shank tool holders of the Quick Change line are designed to be compliant with the ISO 26623-1 standard for toolholding systems. As such, they can be used with any coupling system that is based on the ISO 26623-1 standard, enabling quick & easy tool changes.

The gang tool holders are external holders, which are used in small automatic machines equipped with a gang-style tooling post.

Tool holders for internal turning jobs. Unlike the standard holders that use a 1.5° helix angle, the tool holders that belong to the current product line use 3.5°.

Tool holders for cutting external threads/grooves. These holders are specially designed to operate in an upside-down position, while keeping the height of the cutting edge at the same level as standard tool holders.