Roughing and semi-finish machining face surfaces.Cutting depths of up to 10 mmDiameter range from 63 to 200 mmAlternating installation of indexable inserts LTHU possibleFour or eight-cutting edge indexable insertsContact angles of 45° and 75°

Ideal for producing the best surface finishes on parts made of aluminium. Realisation of surfaces with Rz ≤ 5 μm Diameter range from 32 to 500 mm Innovative chip guiding geometry for high process reliability Wedge adjustment to the μ for perfect surface finishes HSC milling cutters in lightweight design for machines with limited spindle power Milling cutters with brazed cutting edges for cutting depths of up to 8 mm

Ideal for milling 90° shoulder surfaces.Cutting depths of up to 14 mmDiameter range from 16 to 200 mmSeries for inclined entry, full slot milling and plunge millingAlternating installation of indexable inserts LTHU possibleFour or eight-cutting edge indexable insertsAxial adjustment for highest surface qualityContact angles of 88° and 90°

Customer-specific custom solutions with PCD cutting edges for highest requirements.Milling cutters as combination tool for reduced non-productive timesMilling cartridges can be realised with customer-specific shapes and contoursCircular milling cutters for complex contours and recesses

Customer-specific custom tools with ISO elements for highest requirements.Advantages of tangential technology also on custom milling cuttersMulti-stage milling cutters for reduced tool changesHybrid tools combine different tool systems

The portfolio of standard milling tools is rounded off with a particularly cost-effective milling range with pressed, radial ISO indexable inserts. The new powerful face, shoulder, slot and shell end face milling cutters are designed for roughing and for medium machining of cast iron, steel and stainless steel.  Face milling cutters Roughing and semi-machining face surfaces. Highly cost-effective due to sintered, radial indexable inserts Cutting depths up to ap = 5 mm Indexable insert with eight cutting edges and positive basic shape for parts susceptible to vibration Highly cost-effective indexable insert with 16 cutting edges and negative basic shape Contact angle 45° Shoulder milling cutters Ideal for milling 90° shoulder surfaces. Radial indexable inserts with two, four and eight cutting edges Indexable inserts with positive basic shape for parts susceptible to vibration Cutting depths up to ap = 11 mm Contact angle 90° ​​​​​​​ Shell end face milling cutters For roughing with high cutting depths. Ideal for deep shoulder milling and for trimming. Radial indexable inserts with two and four cutting edges for small diameters from 25 mm Cutting depths up to ap = 62 mm Contact angle 90°

For roughing with high cutting depths. Ideal for deep shoulder milling and for trimming.Cutting depths of up to 75 mmDiameter range from 25 to 200 mmAlso suitable for heavy machining and full slot millingContact angle 90°

As you were browsing something about your browser made us think you were a bot. There are a few reasons this might happen:

For roughing large bore diameters (> 150 mm).Cutting depths of up to 35 mmDiameter range from 80 to 160 mmPlunging and ramping possibleOptionally with vibration damperIdeal for machining centresContact angle 90°

Milling deep shoulder surfaces or slots. Can be used as gang milling cutter or milling shaft.Cutting depths of up to 17 mmDiameter range from 100 to 200 mmIdeal for machine tools with extending sleeveCan be adjusted axially for finishingContact angles of 88° and 90°