Effect: sudden and unexpected occurrence, resulting in scrapping of tool handle materials or defective and scrapped workpieces

Cause: Improper parameter setting, improper tool face material selection, poor workpiece rigidity, unstable blade clamping Measures: check whether the parameter setting is reasonable, and select the corresponding tool according to the workpiece material

Our carbide threading insert could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:

Measures: set reasonable parameters, reduce the feed rate and chip, select the corresponding processing blade, and strengthen the rigidity of the workpiece and blade

Cause: The processing parameters are set incorrectly, and the vibrating tool workpiece or blade is not installed in place

Effect: the size of the workpiece is inconsistent, the surface finish is poor, and the workpiece surface is attached with fluff or burrs. Cause: the cutting speed is too low, the feed is too low, and the blade is not sharp enough

Measures: Adjust the processing parameters, such as reducing the linear speed and using a blade with higher wear resistance