90° cutting edge | D.O.C. max. 0.394" (10.0mm) • Positive axial rake, positive radial rake • 35-degree rhombic inserts with two different nose radius options • High polish for excellent surface finish and reduced built-up edges • Large chipbreaker grooves for controlled chip evacuation • Low cutting forces due to the positive cutting edge

90° cutting edge | D.O.C. max. 0.67" (17.0mm) • Designed for high-speed machining of aluminum • Buffed surface for smooth chip evacuation and reduced BUE • High rake angle for good surface finish and lower cutting loads • For square shoulder milling and curved surface machining

Curved edge | D.O.C. max. 0.039" (1.0mm) • Low entering angle for high feedrates • High cost-efficiency, with 4-corner inserts • Positive rake angle for lower cutting forces • Wide flank face for rigidity and strong clamping

Depth of Cut: The maximum depth of cut (DOC) for a specific insert. The maximum DOC is affected by many variables, and may not be achievable under all conditions.

Image

90° cutting edge | D.O.C. max. 0.217" (5.5mm) • Superior perpendicularity and minimized cutting loads • Optimized for high-quality surface finishes • 3-face clamping for stable operation in tough conditions • Suitable for plunge milling

To view Vimeo contents on this website, you need to consent to the transfer of data and storage of third-party cookies by Vimeo.. This allows us to improve your user experience and to make our website better and more interesting. Without your consent, no data will be transferred to Vimeo. However, you will also not be able to use the Vimdeo services on this website.

90° cutting edge | D.O.C. max. 0.591" (15.0mm) • Positive axial rake, positive radial rake • Sharp cutting edge geometry, and robust inserts • First choice for large cutting depths with high feedrates • Specially designed cutting edge, for high-quality shoulder milling

To send data to Brevo, you need to consent to the transfer of data and storage of third-party cookies by Brevo. This allows us to improve your user experience and to make our website better and more interesting.

Material Type: Filter by primary workpiece material to find the inserts that are best suited for that specific material. You can also then filter by secondary workpiece material to find inserts that will cut multiple materials.

15° cutting edge | D.O.C. max. 0.071" (1.8mm) • 15-degree high feed mill • Inserts with 4 cutting edges • Ramping possible • Double clamping system for inserts

45° cutting edge | D.O.C. max. 0.217" (5.5mm) • Negative axial rake, positive radial rake • Double-sided inserts with 16 cutting edges • Special geometry for consistent cutting and long life • Strong insert and powerful clamping

45° cutting edge | D.O.C. max. 0.138" (3.5mm) • Positive axial rake, positive radial rake • 45-degree cutting edge • Inserts have 8 cutting edges • Screw clamping

By selecting "Accept all", you give us permission to use the following services on our website: YouTube, Vimeo, ReCaptcha, Google Analytics, Google Ads, Google Tag Manager, dash.bar, Brevo. You can change the settings at any time (fingerprint icon in the bottom left corner). For further details, please see Individual configuration and our Privacy notice.

90° cutting edge | D.O.C. max. 0.059/0.098" (1.5/2.5mm) • Double-sided inserts with 4 cutting edges • Unique geometry for lower cutting loads and longer life  • High rake angle with strong, sharp cutting edges • Designed for high-efficiency plunge milling

Image

To submit forms on this page, you need to consent to the transfer of data and storage of third-party cookies by Google. With your consent, reCAPTCHA, a Google service to avoid spam messages via contact forms, will be embedded. This service allows us to provide our customers with a safe way to contact us via online forms. At the same time, the service prevents spam bots from compromising our services. After you gave your permission, you might be asked to answer a security prompt to send the form. If you do not consent, unfortunately you cannot use the form. Please contact us in a different way.

This is a web analysis service. It allows the user to measure advertising return on investment (ROI) and track user behavior. Data collected: anonymized IP address, date and time of visit, usage data, click path, app updates, browser information, device information, JavaScript support, pages visited, referrer URL, location information, purchase activity, widget interactions.

Would you like to see these contents? Activate the desired contents for one session only or allow the website to remember these settings. Once you have given your consent, the third-party data can be loaded. For this, third-party cookies might be stored on your device. You can change these settings at any time (fingerprint icon in the bottom left corner). For further details, please see the Privacy notice.

90° cutting edge | D.O.C. max. 0.571" (14.5mm) • Negative axial rake, positive radial rake • 90-degree shoulder mill with rectangle insert • Double-sided, thick inserts for high stability and deeper cuts

17.23° cutting edge | D.O.C. max. 0.07" (1.8mm) • Negative axial rake, negative radial rake • Positive rake angle for lower cutting forces • Strong vibration and impact resistance • Large chip pocket for smoother chip evacuation

90° cutting edge | D.O.C. max. 0.649" (16.5mm) • Superior perpendicularity and minimized cutting loads • Optimized for high-quality surface finishes • High rake angle lowers cutting loads and minimizes burrs • High-speed and high-feed capability improve productivity

End mill with indexable inserts The end mill consisting of tool steel is equipped with carbide indexable inserts. The indexable inserts are standardized and can be easily exchanged. Application: Aluminum, plastic, wood Technical data Indexable inserts APGT1135 - solid carbide Basic body Tool steel Scope of delivery: End mill incl. Indexable inserts and tools Diameter Shank Cutting length / total length Indexable inserts Length B 10 10 8 / 70 APGT1135 12 12 8 / 70 APGT1135 16 16 8 / 80 APGT1135

Milling Cutter Series: Filter by the Haas Milling Cutter Series to find all the inserts available for that specific cutter. If you don’t know the cutter series (or have a non-Haas cutter body), you can also filter by insert style (shape), or ANSI designation.

This is a tag management system. The Google Tag Manager allows tags to be integrated centrally via a user interface. Tags are small sections of code that can track activities. Script codes from other tools are integrated via the Google Tag Manager. The Tag Manager makes it possible to control when a specific tag is triggered.

45° cutting edge | D.O.C. max. 0.275" (7.0mm) • Negative axial rake, positive radial rake • Double-sided, extra-thick insert with 8 cutting edges • Large rake angle reduces cutting forces • Wiper insert geometry for good surface quality

The settings you specify here are stored in the "local storage" of your device. The settings will be remembered for the next time you visit our online shop. You can change these settings at any time (fingerprint icon in the bottom left corner).For more information on cookie lifetime and required essential cookies, please see the Privacy notice.

90° cutting edge | D.O.C. max. 0.303" (7.7mm) • 90-degree shoulder mill • Double-sided, thick insert for high stability and deeper cuts • Inserts with 6 cutting edges

45° cutting edge | D.O.C. max. 0.236" (6.0mm) • Positive axial rake, positive radial rake • Large rake angle for faster, easier cutting • Inserts with 4 cutting edges

This price includes shipping cost, export and import duties, insurance, and any other expenses incurred during shipping to a location in France agreed with you as a buyer. No other mandatory costs can be added to the delivery of a Haas CNC Product.

Image

There are several variables that go into choosing the correct insert for your milling operations: the specific cutter body being used (milling cutter series), the type of machining operation (toolpath type), the cutting-edge angle (lead angle), the depth of cut, the materials being cut, and more. Use the filters on the left-hand side below to narrow down your choices, and find the inserts you need.

45° cutting edge | D.O.C. max. 0.236" (6.0mm) • Negative axial rake, positive radial rake • Double-sided, extra-thick insert with 8 cutting edges • Low cutting loads and excellent smooth cutting

To view YouTube contents on this website, you need to consent to the transfer of data and storage of third-party cookies by YouTube (Google). This allows us to improve your user experience and to make our website better and more interesting. Without your consent, no data will be transferred to YouTube. However, you will also not be able to use the YouTube services on this website.

90° cutting edge | D.O.C. max. 0.217" (5.5mm) • Superior perpendicularity and minimized cutting loads • Optimized for high-quality surface finishes • High rake angle lowers cutting loads and minimizes burrs • High-speed and high-feed capability imrpove productivity

90° cutting edge | D.O.C. max. 0.63" (16.0mm) • Positive axial rake, negative radial rake • 3D helical cutting edge for lower cutting forces • Wiper geometry for high-quality surface finishes • Superior perpendicularity and minimized cutting loads

This is an advertising service. This service can be used to display personalized or non-personalized advertising to users. With Google Ads Conversion Tracking, we can measure our advertising success in the Google advertising network. We place advertisements in the Google advertising network so that our offers can be found more easily. We try to optimize our advertising as much as possible. Also to keep advertising costs as low as possible. This is reflected in our prices.

Round edge | D.O.C. max. 0.236" (6.0mm) • Superior perpendicularity and minimized cutting loads • Optimized for high-quality surface finishes • High rake angle lowers cutting loads and minimizes burrs • High-speed and high-feed capability improve productivity