Boring Bars can be used in a variety of applications, including drilling, reaming, facing, and chamfering. They are commonly used in the automotive, aerospace, and manufacturing industries to produce engine blocks, cylinders, and other precision parts.

One of my memorable customer visits was to a CNC job shop in a small village in Manesar, on the outskirts of the National Capital Region (NCR). After a very tasty and colourful Haryanvi lunch (dal, sabzi, raitha, salad and fried green chillies) I walked over to a carpenter’s shop next door, and was invited by the owner to smoke a hookah with him. In keeping with the leisurely pace of a village, he had a bunch of friends hanging around chatting and seemed to be spending more time at the hookah than on his work – my dream life.

Image

This must also be the only customer of ours who has peacocks roaming around the premises. I always find it delightful that these beautiful birds are so common in the NCR, roaming around like chickens. We used to have an office in Faridabad where they would be perched on the balcony wall in front through the day.

The picture shows the helix angle for various combinations of thread diameter and pitch. E.g., if the thread diameter is 50 mm and pitch is 4 mm, the helix angle is somewhere between 1 and 2 degrees, closer to 2. Cutting tool manufacturers have standard anvils from 0.5 and 4.5 degrees, in steps of 1 degree. Each coloured band in the picture represents an anvil angle. E.g., if your thread size falls in the white band, use an anvil of 0.5 degree.

When you buy a threading holder, it comes with an anvil of 1.5 degrees. Use the graph in the picture above to quickly determine the anvil angle, and use the appropriate anvil.

The insert is therefore seated at a sideways angle on an Anvil, or Shim – some manufacurers call it an anvil, and some call it a shim. The anvil orients the cutting edge so that it is perpendicular to the flank, and the clearance angle on both sides is equal. An appropriate anvil must be used based on the helix angle of the thread.

Image

Image

Aloris Boring Bar is a Cutting Tool used in machining operations to enlarge and finish holes that have already been drilled or cast. It is designed to fit into the spindle of a lathe or a milling machine and is used to cut or remove material from the inside of a workpiece.