The special Ingersoll HPC geometry offers multifunctional applicability of the ball end mills and meets the requirements for machining common material groups. The excellent roughing-finishing geometry can easily be used in different machining strategies.

The vibration damped prolongations are available for centering-Ø27, -Ø32 und -Ø40 mm at first in the modular Z5-size, i.e. outer Ø of 78mm, the smaller Z4-size with outer Ø of 61mm will follow soon in centering-Ø22 and Ø27.

Ingersoll has expanded the RhinoTurnX line by adding the 70-degree corner angle XNMV1105 insert for multidirec-tional and high feed turning applications. The RhinoTurnX line dramatically improves productivity due to its all-directional and high feed turning capabilities.

The TDXY insert is designed for various applications: external, internal and face grooving as well as turning applications. High feed capability due to the reinforced edge strength and optimal chip breaker result in improved productivity. The insert line enables good performance even in both continuous and interrupted cutting conditions; the straight front cut-ting edge shape not only enables a flat bottom surface when grooving but also improves tool life by minimizing chipping and notch wear.

A sharp cutting edge due to the ground fl ank face and high rake angle reduces cutting force, therefore provides good surface fi nish and longer tool life.

As part of the new innovative SFeed products, Ingersoll is introducing the modular DeepTwist tool for deep hole drilling operations. The modular DeepTwist "TD" part-hole drills in a stable design offer optimum performance, even with workpiece materials with a tensile strength over 1000 N/mm². The solid material design makes it possible to transmit high torsional forces.

The new screw-in type thread milling cutters are an addition to the existing ChipSurfer series 17Y_/18Y_ in partial profil range 55°/60°.

This cutter series has ChipSurfer connections in maximum diameter range for reliable and highly effective machining, even in deep threads.

The TDT… -RS precision round type insert provides excellent surface fi nish for external and internal profi ling, turning and grooving applications.

In order to optimize our website for you and to be able to continuously improve it, we use cookies. With your acceptance you agree to the use of cookies. Further information on cookies can be found in our data protection declaration.

Our proven InnoFit modular adaption system is expanded by a I·Absorber vibration damped prolongation for shell type milling cutter in the length of 200 mm. This new I·Absorber prolongation can be combined with all standardized spindle adaptors and solid prolongations.