Image

China manufacturing industries are full of strong and consistent exporters. We are here to bring together China factories that supply manufacturing systems and machinery that are used by processing industries including but not limited to: cutting tool, tungsten carbide insert, carbide insert. Here we are going to show you some of the process equipments for sale that featured by our reliable suppliers and manufacturers, such as Carbide Cnc Insert. We will do everything we can just to keep every buyer updated with this highly competitive industry & factory and its latest trends. Whether you are for group or individual sourcing, we will provide you with the latest technology and the comprehensive data of Chinese suppliers like Carbide Cnc Insert factory list to enhance your sourcing performance in the business line of manufacturing & processing machinery.

Cause: Improper parameter setting, improper tool face material selection, poor workpiece rigidity, unstable blade clamping Measures: check whether the parameter setting is reasonable, and select the corresponding tool according to the workpiece material

22ER 6.0 ISO carbide turning tool is made of high-quality tungsten steel alloy, with high overall hardness, wear resistance and durability, smooth and polished surface, and effective corrosion resistance; Single sided hexagon can be used, cutting is sharp, spiral groove is finely ground, cutting resistance is reduced, cutting is stable and there is no chip accumulation, the generation of chip accumulation tumor and tool clamping are avoided, and efficient machining is realized.

Effect: sudden and unexpected occurrence, resulting in scrapping of tool handle materials or defective and scrapped workpieces

Image

Measures: set reasonable parameters, reduce the feed rate and chip, select the corresponding processing blade, and strengthen the rigidity of the workpiece and blade

Our carbide threading insert could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:

Effect: the size of the workpiece is inconsistent, the surface finish is poor, and the workpiece surface is attached with fluff or burrs. Cause: the cutting speed is too low, the feed is too low, and the blade is not sharp enough

Measures: Adjust the processing parameters, such as reducing the linear speed and using a blade with higher wear resistance

Cause: The processing parameters are set incorrectly, and the vibrating tool workpiece or blade is not installed in place

Image