The shopping cart currently contains articles from offer and cannot contain any further articles.Do you want to empty the shopping cart and add this article?

The MV1000 series includes two new grades for milling: MV1020 and MV1030 for machining a wide range of materials from alloy and stainless steels through to cast iron. The turning grade (MV9005) specialises in the high efficiency machining of heat resistant super alloys.

Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Greece, Great Britain, Hungary, Ireland, Italy, Latvia, Lithuania, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

Image

One of the UK’s leading manufacturers of flat rolled aluminium coils showcased the talents of its budding engineers at the recent UK Metals Expo.

The key feature of these innovative grades is due to the adoption of the newly developed AL-Rich (aluminium) coating method. This advanced CVD coating of aluminium titanium nitride (Al,Ti)N is a compound of aluminium and titanium that is widely used as a coating for advanced cutting tools because of its extremely hard and heat-resistant properties.

The MV1020 milling grade has advanced wear and thermal shock resistance and also achieves stable cutting at high cutting speeds, especially when machining steel and ductile cast iron, thus greatly reducing work time.

Negative geometry inserts CNMG, DNMG, SNMG, TNMG and VNMG types are available together with a 7º RCMT and RCMX positive geometry types in these grades.

Allied Machine and Engineering, a leading manufacturer of holemaking and finishing cutting tools, has announced the expansion of the T-A Pro replaceable insert drilling system into the Y series.

Mitsubishi Materials has developed a special series of grades that reaches across both milling and turning applications.

Unless otherwise stated, the delivery of bulky or heavy-weight items such as granite plates without special agreement in principle from Ratingen, Germany or directly from the manufacturer with additional shipping costs, excluding packaging.

Image

Image

The largest number of young people ever are now studying at University Technical Colleges, enrolment figures for the network of 44 technical education schools have revealed.

Mitsubishi Materials has developed a special series of grades that reaches across both milling and turning applications. The key feature of these innovative grades is due to the adoption of the newly developed AL-Rich (aluminium) coating method. This advanced CVD coating of aluminium titanium nitride (Al,Ti)N is a compound of aluminium and titanium that is widely used as a coating for advanced cutting tools because of its extremely hard and heat-resistant properties. The hardness of (Al,Ti)N increases as the aluminium content ratio increases, but with conventional technology, when the aluminium content ratio exceeds 60%, the crystal structure changes and the hardness of (Al,Ti)N decreases. The new MV9005 turning inserts However, using a new coating process based on Mitsubishi Materials’ own original technology the Al-Rich coating does not change its crystal structure even when the aluminium content rises. This enables a higher aluminium content and a provides a greater hardness (Al,Ti)N. The MV1000 series includes two new grades for milling: MV1020 and MV1030 for machining a wide range of materials from alloy and stainless steels through to cast iron. The turning grade (MV9005) specialises in the high efficiency machining of heat resistant super alloys. The MV1020 milling grade has advanced wear and thermal shock resistance and also achieves stable cutting at high cutting speeds, especially when machining steel and ductile cast iron, thus greatly reducing work time. Its sister MV1030 grade has an Al-Rich coating that provides excellent wear resistance. It was also found that it has a high resistance against sudden breakage, especially during problematic wet cutting or when machining stainless steels. The combination of atoms with different sizes (Aluminium red, Titanium orange) creates an exceptionally hard crystal structure with Mitsubishi’s new grades MV inserts are extremely versatile and are available for WWX, WSX, WJX, WSF, VPX, AHX and ASX cutters. When it comes to turning the MV9005 grade is said to exceed all current standards when machining heat resistant super alloys. A range of negative and positive inserts and five different chip breakers ensure the optimum combination for efficient turning can be achieved. Cutting speeds up to 110m/minute are attainable in some applications. Negative geometry inserts CNMG, DNMG, SNMG, TNMG and VNMG types are available together with a 7º RCMT and RCMX positive geometry types in these grades. Mitsubishi Materialswww.mmc-carbide.com/gb

However, using a new coating process based on Mitsubishi Materials’ own original technology the Al-Rich coating does not change its crystal structure even when the aluminium content rises. This enables a higher aluminium content and a provides a greater hardness (Al,Ti)N.

When it comes to turning the MV9005 grade is said to exceed all current standards when machining heat resistant super alloys. A range of negative and positive inserts and five different chip breakers ensure the optimum combination for efficient turning can be achieved. Cutting speeds up to 110m/minute are attainable in some applications.

The hardness of (Al,Ti)N increases as the aluminium content ratio increases, but with conventional technology, when the aluminium content ratio exceeds 60%, the crystal structure changes and the hardness of (Al,Ti)N decreases.

If you find this article informative, consider subscribing digitally to PES Media for free. Keep up to date with the latest industry news in your inbox as well as being the first to receive our magazine in digital form.

Its sister MV1030 grade has an Al-Rich coating that provides excellent wear resistance. It was also found that it has a high resistance against sudden breakage, especially during problematic wet cutting or when machining stainless steels.

Harkortstraße 54 40880 Ratingen Nemecko Tel: +49 2102 4400-0Fax: +49 2102 4400-24info@saratools.com