The P92 A insert is designed for grooving and parting off particularly large groove depths (D>45mm). The one-sided setting of the P92 A plate prevents the re-cutting effect. Due to the long and stable insert seat of the P92 system, the P92 A insert offers a high degree of process stability and repeatability.

Chip breaker: Especially developed for effective chip flow when face grooving.Insert: Developed for machining of stainless and alloyed steels.Clearance: Especially for face grooving.Remark: To be used as well for radial grooving and parting off.

Head Office: Milo Tools Ltd, Unit 3 Scandinavia Court, Chain Bar Road, Cleckheaton, West Yorkshire, BD19 3QW, 01274 872822.Registered Company Number: 08899951VAT Registration Number: GB 184 4633 89

Roughing: Geometry with zero degree chamfer x 0,2 mm.Medium machining: Wiper Geometrie scharf schneidend und gekennzeichnet durch eine stabile Nullgradfase x 0,1 mm.Finishing: Sharp cutting geometry, polished.

LTNN Grooving geometry for parting off long chipping materials. Especially recommended for double-spindle lathes.Stechgeometrie zum Abstechen langspanender Materialien.

The P92 A SCTD is a grooving insert specifically for parting off. The honed main cutting edge with a spacious chip space and the reinforced flanks are suitable for machining alloyed and stainless steel.

Grooving and turning insert from our P92 P system, for profiling and copying. It has been developed, to machine materials, which are difficult to cut, like:

Grooving and turning insert from our P92 P system, for grooving and copying. In these applications the STV is unbeatable:

GTNS grooving insert, tapered version with 1 cutting edge. P92 A plates and P92 A CXCB ... holders combine to form a technically rigid unit due to the long plate seat guide. This tool connection is therefore particularly suitable for large grooving depths and deep recesses.

The P92 A CTD is a grooving insert specifically for parting off. The chamfered main cutting edge with reinforced flanks with a spacious chip space are suitable for machining alloyed and stainless steels as well as components with an interrupted cut.

High positive parting off geometry Ground top rake with 0,1 mm chamfer on the major cutting edge for stabilisation. Especially recommended for: NE materials and difficult to cut materials Application: profiling

Type with one cutting edge. Deep cutting depth and clean turning faces. Reduce feed while cutting depth increases.Grooved parting off edge with reinforced flanks. The deep and spacios chip-through gives excellent chip control. Efficent on almost all materials.

KEMMER Hartmetallwerkzeuge GmbH Im Täle 11, D-72218 Wildberg Phone: +49 7054 / 92 91 - 0 Telefax: +49 7054 / 92 91 - 26 E-Mail: info@kemmerhmw.de