HMRG-6, 6mm Ø Carbide Internal (ID) Micro Radius ... - micro grooving full radius insert
MTECK-ISO Solid Carbide Internal Threading Endmill Step Release, Lead x2 With Coolant Hole, Used for ISO Thread Profile.
MTECBF-W Solid Carbide Internal or External Threading Endmills with a Coolant Hole. Intended for BSF/BSP Thread Profiles.
MTECZ-Whitworth Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes, for Internal or External Whitworth Thread
Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass.
MTECQ-UN Solid Carbide Endmills with Internal Coolant Holes and a Reduced Diameter Neck, for Deep Internal UN Profile Threading
MTECZ-NPT Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes, for Internal or External NPT Thread Profile
MTECM-UN Solid Carbide Internal Threading Endmill Step Release, Lead x3 With Coolant Hole, Used for UN Thread Profiles.
MTECK-UN Solid Carbide Internal Threading Endmill Step Release, Lead x2 With Coolant Hole, Used for UN Thread Profiles.
MTECM-ISO Solid Carbide Internal Threading Endmill Step Release, Lead x3 With Coolant Holes, Used for ISO Thread Profile.
MTECD-ISO Small Diameter Short Left-Hand Cut. Solid Carbide Endmills for Internal ISO Profile Drilling, Threading and Chamfering.