1.6mm-3.2mm-4.8mm-6.35mm-7.9mm-9.5mm Particle Size Tungsten Carbide
Have you ever wondered whether it’s worth the time and expense to install threaded inserts into your 3D-printed projects? [Stefan] from CNC Kitchen did, and decided to answer the question once and for all, with science.
Looking for a high-performing golf bag that won't break the bank? Well, you've come to the right place
After testing the classic Ram Zebra, which features on our list of the 10 best putter designs of all time, we were eager to get our hands on Ram's latest putter line up.
This is a very important factor to consider because when putting, feel is everything. Some putters offer a firmer feel off the face whilst others are soft, some are heavier than others too so you need to find a model that fits well in your hands. The putter grip plays a huge part in the confidence you feel with a putter. Get a putter with a grip that feels right and sits comfortably in your hands while allowing you to return the putter back to the ball squarely and consistently. You may also want to think about the shaft too and how much vibration you get from the club, for example, if you prefer that to be nerfed or you prefer to feel good feedback from the ball on the clubface.
Ram FX-01 is an impressively stylish blade putter for an incredibly cheap price. It's wide head adds stability and there's ample alignment help too.
I’d like to see tests with embedded sliding and/or pronged t-nuts. I suspect that they would work much better to resist both pulling and torque.
When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works.
While golf is one of the most expensive sports to play, cheap putters are not hard to come by. There are plenty of great putters on this list for those who are just getting into the game or are looking for a slightly less expensive alternative to the flagship flatsticks that some of the big golfing brands produce. If you are looking for a cheap putter, there are a few things to consider before purchasing that club. As the putter is one of the most important clubs in your bag that can save the most shots off your round, you will need to think carefully about what you're purchasing before you go ahead and buy that club. For that reason, we have set out below a list of five considerations you need to keep in mind when purchasing your next putter.
If you're a beginner golfer looking at purchasing more equipment that wont cost you an arm and a leg, take a look at our guides on the best budget golf drivers, the best golf irons for beginners and the best cheap golf balls.
Beginners should use a putter that offers a high degree of forgiveness and stability. For that reason mallet putters are generally the best putters for beginners as the offer higher MOI's and have larger sweet spots on their club face.
Naturally, you'll progress and want to upgrade your putters. For that, we have guides to the best Scotty Cameron putters as well as the most forgiving putters, or even a guide on the best putters for high handicappers. If you're completely new to golf, you may also want to take a look at our guide on the best putters for beginners.
In testing, we found the FX-01 wasn't that forgiving. The benefit of this is that it will encourage you to work on finding the middle more often, where you'll definitely be rewarded. This makes for a good putter for beginner golfers who are looking to improve their stroke.
Not that surprising given the design, but that’s at the first time you tread the M3 screw in. What happens after you do it 10 times? Maybe the insert is better at that point than not having it?
Wilson's Infinite Bucktown Putter provides decent forgiveness, ample alignment help and an all-round solid, stable feel. A great cost-effective option for golfers who enjoy a firmer feel.
The clear alignment system offers lots of options and the feel and balance was very good for a putter at this price.
Generally, the greens are where golfers lose the most shots during their rounds. Three-putting is the bane of every golfer and it is the one area on every player's scorecard where they can save shots. For that reason it's important to have the right equipment that can help you hit sweeter, much more accurate putting strokes. That's why it may be more beneficial for a golfer to invest in a new putter over any other type of club.
Stefan does remark that on his video, saying that if you are going to bolt-and-forget an undersized hole on the print is good enough, and that if you are going to constantly insert and remove the screws even the cheap insert is a better option.
This probably isn’t groundbreaking or anything, but for small screws I’ve had good luck pre-heating them with a soldering iron, then run it in and out of the part to form the thread. The thread forms a little nicer than just forcing the plastic around and potentially separating along the layer lines.
I’d actually like to see what happens when yo try to pull the threaded insert out the other way – in the opposite direction from how they’re inserted. I’d imagine the plastic would break before the insert pulls out, depending on how much plastic is backing it up and the diameter of the clearance hole needed to pass the fastener. Not suitable for every application, of course, but I’d bet it would be pretty strong.
Overall, we felt it had a similar feel to a blade putter but in a mallet form which means it may suit a wide range of players.
We thought the feel off the face was very good thanks to a semi-rigid TPU pad that sits behind a metallic face. The face features grooves in an arc to improve the roll on the ball which showed up in testing too.
Ahead of the event's start on Thursday, all 24 players, captains and vice captains, plus their partners, headed to the Presidents Cup Gala dinner in the centre of Montreal
Despite looking like a premium model, the Bandon 3 putter from TaylorMade comes with a comparatively small price tag...
Do you have a golf trip booked away soon, but don't want to splash out on an expensive travel bag for your clubs? Well here, we have you covered
While we’re talking head to head tests, no love for Matthias Wandel’s Gorilla glue vs. wood glue shootout (https://www.youtube.com/watch?v=MUWu-N85oXM) and pocket hole vs. mortise and tenon joint comparison (https://www.youtube.com/watch?v=apsH8eBfjVA)?
This putter certainly performs on all lengths of putt while also providing a more refined look and solid feel. A premium model without the premium price.
Wilson’s hardware doesn't get the attention it deserves. This is especially true for its every level Infinite range—which has been revamped for 2024 with a total of nine new models, one of our favorites being the Bucktown.
Want to work on your putting just about anywhere? A good putting mat is a great way to do so and here are some of our favorites.
Unfortunately, this creates a barrier for many novice and first-time players looking to start their golf journey. At Golf Monthly, we think golf should be accessible to everyone.
We take a look at the best putters on Amazon available right now, varying in price to suit your eye and budget.
Dave’s lowest round is a one over par 73 around Kirkby Valley Golf Club in 2018, which included a bogey on the 18th to ruin the one and only chance he’ll ever have of shooting an even par or better score. That errant tee shot on 18 does not still haunt him to this day though, in fact he hardly ever thinks about it. No, honestly, he doesn’t. Not at all. Never.
We loved the feel from the milled face although the Retreve was a little firmer than other putters in the SOFT 2 family, probably due to the gaping ball shaped hole behind the face. Still, it produced a pleasing feel when hit out of the sweet spot.
As you would expect given the name, this putter features a high Moment of Inertia which basically means it is less likely to twist if hit off-centre. The result is a very forgiving putter with stability too thanks to the weight being repositioned back in each of the corners. This makes for a great choice for those who are just starting their golf journey and are looking for something that'll help them nail more putts.
If this sounds familiar, it’s with good reason: we covered [Stefan]’s last stab at assessing threaded inserts back in March. Then, he was primarily interested in determining if threaded inserts are better than threads cut or printed directly into parts. The current work is concerned with the relative value of different designs of threaded inserts. He looked at three different styles of press-in inserts, ranging in price from pennies apiece to a princely 25 cents. The complexity of the outside knurling seems not to be correlated with the price; the inserts with opposed helical knurls seem like they’d be harder to manufacture than the ones with simple barbs on the outside of the barrel, but cost less. And in fact, the mid-price insert outperformed the expensive one in pull-out tests. Surprisingly, the cheapest inserts were actually far worse at pull-out resistance than printing undersized holes and threading an M3 screw directly into the plastic.
Horses for courses. Maker videos are intended to help the maker community make *their* stuff better.
The Retreve is Cleveland’s first putter with the ability to pick the ball out of the hole which is a game-changer for seniors. With the milling on the face and the luxurious Pistol Grips they look every inch a premium product and that look is matched by the sound and feel when you strike a putt.
On the whole, we think this is an incredibly well-balanced model that will definitely help golfers set the face square and see their stroke path more clearly. And obviously with its inclusion in this guide, the price point is attractive too.
Check out our guide to the best value golf balls that offer good all-round performance without breaking the bank
You have to like what you are putting with because this will give you confidence when you're standing over the ball. Confidence is king on the putting greens, so get a club that is going to boost your confidence levels. In terms of mallets, there are loads of classic and futuristic designs above so it is purely a case of finding a model you like the look of.
Getting into specifics, we test putters outdoors on real greens with premium golf balls to get a thorough understanding of design features, feel, sound and looks. Ultimately, we aim to be as insightful and honest as possible in our reviews so it is important to acknowledge that no manufacturer can buy a good review. This is because our team tells it how it is. To learn more about our methodology, take look at our guide on how Golf Monthly tests products.
Dave is a distinctly average golfer with (fading) aspirations to be so much more than that. An avid collector of vintage Ping putters and the world's biggest Payne Stewart fan, in 2021 Dave turned his front garden into a giant putting green to work on the weakest area of his game. Progress has been slow but steady! In addition to his work reviewing golf gear and writing features for Golf Monthly and T3, Dave is the founder of the Bang Average Golf website.
Putters are the most important club in your bag because as many golfers will know, they can help you save shots on the greens. While we would say a good putter is priceless, you can pick up deals on putters for as little as $20 dollars but spend more than $400 on a top of the range club.
In testing, at address it sat very well to the ground which can be an issue for putters of this shape. We also really liked the contrast of the silver leading edge with the darker sections of the putter, as well as the white line and dot which aided alignment.
[Stefan] also looked at torque resistance, and found no substantial difference between the three insert types. Indeed, none of the inserts proved to be the weak point, as the failure mode of all the torque tests was the M3 bolt itself. This didn’t hold with the bolt threaded directly into the plastic, of course; any insert is better than none for torque resistance.
From jackets to pants, we take a closer look at the best cheap golf rain gear currently on the market.
Cleveland is known for making some excellent wedges but it's putters are definitely underrated. Don't be put of by the Retreve's unorthodox 'gimmicky' shape either!
It's also worth thinking about the alignment tools the putter can offer you. While some golfers may not prefer to have any aiming guides on the back of their putters, most players can benefit from having an aiming line on the back of their putter which can also help to improve your focus on the ball and help you strike through the shot more square.
Right out of the box, the Bucktown mallet putter's stock Pistol Karakal flat-sided grip felt comfortable in our hands. Like many of the best putters, the Bucktown had a sold, stable feel to it. This firm sensation would pair nicely with a soft, low compression golf ball. The strike pattern is very helpful and is perfect for mid-to-high handicappers.
Our final tip is to think about price because while there are some premium designs out there, there are also some models which offer excellent value, as the selections above show. Sometimes less experienced players should steer clear of the more expensive offerings currently on the market which may actually not be very forgiving and may not be suitable for your swing style.
Straight away, we liked the jumbo style black grip and the matching graphite shaft which looks a lot nicer than what you'd typically expect at this price point. The head has a fantastic aesthetic too—we thought the black finish and and branding looked great.
MOI stands for 'moment of inertia' and the higher the MOI, the less your club head will turn through impact, creating a more smooth and even stroke. For that reason, mallet putters typically offer better balance compared to blade putters and are therefore more suitable for less experienced players or those looking for more forgiveness in their club. Additionally, because of this size, mallet putters tend to offer larger sweet spots which are beneficial for players who may struggle to consistently strike the ball.
This is a putter that is easy to align and undoubtedly improves the quality of results regardless of how consistent your stroke is.
There is a lot to be said for not having to bend and pick the ball out of the hole. it shouldn't the sole reason for choosing a putter of course, but it does counts for something. If there’s little to choose between two putters then this little extra feature may sway it for some golfers, especially senior players.
When it comes to product testing, our reviews and buyers' guides are built upon a rigorous testing procedure as well as the knowledge and experience of the test team. Most members of the Golf Monthly team contribute to the putter tests and all writers are able to efficiently test the vast majority of the biggest product releases and convey the pros and cons eloquently.
The Inesis High MOI putter is the top spec model from Decathlon’s range of own brand putters. It's a visually excellent putter that is a great value option.
Golf clubs are expensive. It's not just the best drivers or the best golf irons that will set you back. Most modern clubs have been carefully designed over many, many years and this is reflected in the price.
Putters come in lots of different head designs whether that be blade, mallet, or mid-mallet and all have their positives and negatives. For beginner golfers, we recommend using a mallet putter because they tend to be much larger which helps to improve the forgiveness of the club. That is done through redistribution of the club's weight to the extremities of the clubhead, which stabilizes the club and increases its MOI.
Love pretty much everything Matthias does, but AFAIK we haven’t covered them on Hackaday. That was probably an oversight.
Even chinesium is better than plastics in handling repeated tightening. Self taping screws are used when that’s not an issue.
Off the face it feels solid and offers up a surprisingly firm and loud sound at impact given the deep grooves on the face insert. This remained consistent across its length and the speed was enough to impart a short, controlled stroke and still get the ball to the hole.
We enjoyed seeing [Stefan]’s tests, and appreciate the data that can help us be informed consumers. [John] over at Project Farm does similar head-to-head tests, like this test of different epoxy adhesives.
This versatile Cleveland putter offers a responsive feel and good forgiveness, and it will pick your ball out of the hole for you after knocking it in!
Golf Monthly is part of Future plc, an international media group and leading digital publisher. Visit our corporate site. © Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.
As with all the Infinite range, the Buckingham features counterbalance technology which combines a heavier head and grip weights, moving the balance point closer to the hands for a smoother and more controlled putting stroke.
By using our website and services, you expressly agree to the placement of our performance, functionality and advertising cookies. Learn more
I can’t watch the video right now bit this bit throws up a question in my mind: “Surprisingly, the cheapest inserts were actually far worse at pull-out resistance than printing undersized holes and threading an M3 screw directly into the plastic.”
Same here. A captured nut or embedded in the opposite side of insertion. Bolt might fail first at that point
Why you can trust Golf Monthly Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.
This putter is an addition to the excellent Wilson Staff range of clubs and a very recognizable head shape that has become increasingly popular in mallet putters across the market, and one of the most forgiving putters too.
With this in mind, we've tried, tested and compiled a list of the best cheap putters available today. These are budget models that still deliver the performance you need to play golf. Some of these are also included in our guide to the best putters too.
Dave splits most of his golf between Hurlston Hall Golf Club in Ormskirk, Lancs, and Berrington Hall Golf Club in St Helens and has a handicap that fluctuates between 9 and 12, largely depending on how poor his putting is.
Additionally this putter really elevates itself with the alignment. The white lines on the head contrast with the black finish beautifully, and the middle of the three is slightly thicker to help center the ball at address.
And by far the majority of the time the intended use case is for the force to be pulling the insert out in the normal direction (eg. you’ve printed an enclosure with a lid) as these test results are intended for the average maker.
Take a look at what drivers are in play this week as the International team lock horns with the USA on a demanding golf course
In terms of aesthetics, we loved the sandstone finish on the head. It somehow maintains an elegant and premium look with a raw finish. The Bandon 3 has more of a toe hang so is ideal for players who want to have the forgiveness of a mallet and are perhaps moving from a blade. Indeed the putter sits flush to the ground and the winged shape helps players square the club to the golf ball at impact too.
Blade putters, meanwhile, are better for those putters who have an arc in their stroke. Players who like to feel how the ball reacts off the face may opt to use a blade putter over a mallet to give them greater responsivity. Some argue that blade putters provide slightly better control over distance, but ultimately, that varies from player to player and putter that works best for you.
The Buckingham also comes with an oversize grip as standard which is great for golfers who use a claw grip, or golfers who find themselves gripping too hard on a thin grip and want a softer feel. At a very competitive retail price with a premium look and feel, the Wilson Staff Infinite Buckingham is a great option and one of the best models in terms of value anywhere.
Our only qualm was the acoustics of the putter. Even when we tested with the best golf balls we found the sound of this putter incredibly high-pitched and jarring. Overall, this is a great putter considering the price point it comes out. Of course, it's not without fault but it's still excellent value for under 100 bucks.
There are so many things wrong with this video. 1.Inserts are to be molded in when the plastic is injection molded. 2.Inserts are installed ultrasonically, not with a soldering iron 3. inserts are to to be pulled from the opposite side of the material. If your snapping the heads off of the fasteners you are over torquing the product. ( torque for that size screw is in the neighborhood of 5 inch pounds )
Subscribe to the Golf Monthly newsletter to stay up to date with all the latest tour news, equipment news, reviews, head-to-heads and buyer’s guides from our team of experienced experts.