Unfortunately we can not accept returns on custom length bandsaw blades as once these are made to your specific requirements we can not reuse this material. If you need any help in ordering these products please give us a call as we are more than happy to make sure you receive the exact product you require.

45° cutting edge | D.O.C. max. 0.236" (6.0mm) • Positive axial rake, positive radial rake • Large rake angle for faster, easier cutting • Inserts with 4 cutting edges

Then return the item in its original unopened condition and at your cost including packaging. You will have to arrange the return of the goods yourself and track them using a reputable carrier.

Tool-Wise protects all of our customers' information and ensures the security of your credit card transactions by enabling 128 bit Secure Socket Layer (SSL) encryption at our checkout page. When you are in our Secure Checkout area all information typed by you is encrypted into a code that is impossible for unauthorised parties to read.

A five piece set of double cut tungsten carbide burrs in a range of shapes. The burrs are boxed individually within the box of 5.

It is advisable to inspect the goods prior to signing for delivery. If you can see any damage whatsoever to the packaging sign for the goods as damaged. If this is not possible please ensure you sign for the goods unexamined to allow us to take any claims up with our delivery partners if necessary.

Milling Cutter Series: Filter by the Haas Milling Cutter Series to find all the inserts available for that specific cutter. If you don’t know the cutter series (or have a non-Haas cutter body), you can also filter by insert style (shape), or ANSI designation.

15° cutting edge | D.O.C. max. 0.071" (1.8mm) • 15-degree high feed mill • Inserts with 4 cutting edges • Ramping possible • Double clamping system for inserts

90° cutting edge | D.O.C. max. 0.394" (10.0mm) • Positive axial rake, positive radial rake • 35-degree rhombic inserts with two different nose radius options • High polish for excellent surface finish and reduced built-up edges • Large chipbreaker grooves for controlled chip evacuation • Low cutting forces due to the positive cutting edge

There are several variables that go into choosing the correct insert for your milling operations: the specific cutter body being used (milling cutter series), the type of machining operation (toolpath type), the cutting-edge angle (lead angle), the depth of cut, the materials being cut, and more. Use the filters on the left-hand side below to narrow down your choices, and find the inserts you need.

For your added peace of mind you will see the padlock symbol appear at the bottom of your browser window when you are on our secure pages to notify you that your're buying in a secure area,

45° cutting edge | D.O.C. max. 0.236" (6.0mm) • Negative axial rake, positive radial rake • Double-sided, extra-thick insert with 8 cutting edges • Low cutting loads and excellent smooth cutting

Round edge | D.O.C. max. 0.236" (6.0mm) • Superior perpendicularity and minimized cutting loads • Optimized for high-quality surface finishes • High rake angle lowers cutting loads and minimizes burrs • High-speed and high-feed capability improve productivity

All shipments are sent out on a next day service. Although this can not be guaranteed our statistics show a 99% success rate.

Please note that we can only accept orders from web browsers that permit communication through SLL technology, which means orders can not be inadvertently placed though an unsecured connection - most web browsers above version 3 support this security.

90° cutting edge | D.O.C. max. 0.63" (16.0mm) • Positive axial rake, negative radial rake • 3D helical cutting edge for lower cutting forces • Wiper geometry for high-quality surface finishes • Superior perpendicularity and minimized cutting loads

A silver braze is used rather than a copper braze favoured by other manufacturers as it can be applied at a lower temperature that will not affect the concentricity and hardness of the burr and shank

Curved edge | D.O.C. max. 0.039" (1.0mm) • Low entering angle for high feedrates • High cost-efficiency, with 4-corner inserts • Positive rake angle for lower cutting forces • Wide flank face for rigidity and strong clamping

Should you prefer to give your credit card details over the phone, please call our customer services team ho will be happy to process your order during normal business hours.

90° cutting edge | D.O.C. max. 0.571" (14.5mm) • Negative axial rake, positive radial rake • 90-degree shoulder mill with rectangle insert • Double-sided, thick inserts for high stability and deeper cuts

All our bandsaw blades are made to measure using the measurements provided on your order by our welding team. Please allow an additional 2 days for dispatch of these products.

Image

45° cutting edge | D.O.C. max. 0.217" (5.5mm) • Negative axial rake, positive radial rake • Double-sided inserts with 16 cutting edges • Special geometry for consistent cutting and long life • Strong insert and powerful clamping

The sintering process is performed in a pressure furnace to keep volatilisation to a minimum and ensure the highest hardness is achieved

17.23° cutting edge | D.O.C. max. 0.07" (1.8mm) • Negative axial rake, negative radial rake • Positive rake angle for lower cutting forces • Strong vibration and impact resistance • Large chip pocket for smoother chip evacuation

Depth of Cut: The maximum depth of cut (DOC) for a specific insert. The maximum DOC is affected by many variables, and may not be achievable under all conditions.

If you are not happy for whatever reason with your purchase within 60 days please email us quoting your order number and the reason for the return and we will assign you a returns number.

90° cutting edge | D.O.C. max. 0.303" (7.7mm) • 90-degree shoulder mill • Double-sided, thick insert for high stability and deeper cuts • Inserts with 6 cutting edges

Material Type: Filter by primary workpiece material to find the inserts that are best suited for that specific material. You can also then filter by secondary workpiece material to find inserts that will cut multiple materials.

90° cutting edge | D.O.C. max. 0.591" (15.0mm) • Positive axial rake, positive radial rake • Sharp cutting edge geometry, and robust inserts • First choice for large cutting depths with high feedrates • Specially designed cutting edge, for high-quality shoulder milling

90° cutting edge | D.O.C. max. 0.217" (5.5mm) • Superior perpendicularity and minimized cutting loads • Optimized for high-quality surface finishes • 3-face clamping for stable operation in tough conditions • Suitable for plunge milling

If we have supplied an item incorrectly, or if it is damaged when received or is faulty when received you should notify us within 24 hours of receipt at info@tool-wise.com quoting your original order number.

90° cutting edge | D.O.C. max. 0.649" (16.5mm) • Superior perpendicularity and minimized cutting loads • Optimized for high-quality surface finishes • High rake angle lowers cutting loads and minimizes burrs • High-speed and high-feed capability improve productivity

At Tool-Wise we send out a monthly eNewsletter full of new products, offers and promotions. You can unsubscribe from these communications at any time. But if you would like to subscribe you can do so here. For further details on how your data is used and stored click here.

90° cutting edge | D.O.C. max. 0.059/0.098" (1.5/2.5mm) • Double-sided inserts with 4 cutting edges • Unique geometry for lower cutting loads and longer life  • High rake angle with strong, sharp cutting edges • Designed for high-efficiency plunge milling

90° cutting edge | D.O.C. max. 0.67" (17.0mm) • Designed for high-speed machining of aluminum • Buffed surface for smooth chip evacuation and reduced BUE • High rake angle for good surface finish and lower cutting loads • For square shoulder milling and curved surface machining

We will arrange the uplift of the goods. Should we, after inspection of said items be satisfied as to the alleged defects we will either replace the goods or arrange a refund of the full value of the goods and any carriage costs incurred.

90° cutting edge | D.O.C. max. 0.217" (5.5mm) • Superior perpendicularity and minimized cutting loads • Optimized for high-quality surface finishes • High rake angle lowers cutting loads and minimizes burrs • High-speed and high-feed capability imrpove productivity

Once we have received and inspected the goods we will issue a full refund of the sales price should all the conditions of return be met.

Please note that the following postcodes are a two day service AB26-38, AB44-56, FK17-99, G83, HS1-9, All IV postcodes, KA27-28, KW1-14. KW15-17, PA20, PA41-49, PA60-78, PH18-26, PH30, PH31-41, PH42-44 and ZE1-3 and the Highlands and Islands carriage charge must be selected. We are sorry but these are restrictions and pricing imposed on us from our carrier and are out of hands.

45° cutting edge | D.O.C. max. 0.275" (7.0mm) • Negative axial rake, positive radial rake • Double-sided, extra-thick insert with 8 cutting edges • Large rake angle reduces cutting forces • Wiper insert geometry for good surface quality

This price includes shipping cost, export and import duties, insurance, and any other expenses incurred during shipping to a location in France agreed with you as a buyer. No other mandatory costs can be added to the delivery of a Haas CNC Product.

45° cutting edge | D.O.C. max. 0.138" (3.5mm) • Positive axial rake, positive radial rake • 45-degree cutting edge • Inserts have 8 cutting edges • Screw clamping