The broaching and slotting inserts are made with sintered steel alloy with 13% cobalt. After heat treatment, this material reaches a hardness of 72 HRC all the while preserving high toughness and, therefore, strong resistance to impact.When all sides have been sharpened, the insert is coated with TIN to achieve greater wear resistance. The protruding shape of the inserts makes it possible to re-sharpen them numerous times.The inserts, identified by their code ending with "SM", execute 0.2x45° chamfering on the intersection point between the hole and the walls of the broached slot, leaving the hole clear of any burr. This type of chamfering can only be carried out on UNI keyway seatings.We also manufacture special inserts on customer demand.  ** For these insert sizes, we recommend machining in two steps: roughing and finishing.

REV s.r.l. unipersonale - Via Carpi Ravarino, 158 - 41019 Soliera (MO) - Italy - VAT IT02542120361 - Privacy Policy - Cookie Policy

Image

Image

They are designed for use with Aloris quick change tool posts and allow turning and facing operations without removing the holder from the tool post. Repeat positioning accuracy within millionths is assured when used with Aloris Tool Posts.

#80 and #80L 80 degree Diamond Turning and Facing Tool: These dovetail holders accommodate all varieties of standard 80 degree diamond shaped carbide insets-- positive, negative or neutral rake and either left or right lead angle. Inserts are not supplied.

Image

The broaching and slotting inserts are made with sintered steel alloy with 13% cobalt. After heat treatment, this material reaches a hardness of 72 HRC all the while preserving high toughness and, therefore, strong resistance to impact.When all sides have been sharpened, the insert is coated with TIN to achieve greater wear resistance. The protruding shape of the inserts makes it possible to re-sharpen them numerous times.The inserts, identified by their code ending with "SM", execute 0.2x45° chamfering on the intersection point between the hole and the walls of the broached slot, leaving the hole clear of any burr. This type of chamfering can only be carried out on UNI keyway seatings.We also manufacture special inserts on customer demand.