BIG KAISER adds stainless steel and aluminum insert grades for milling and

We advise you to pre-drill all of the hardwood products, this makes it easier to mount the products and you will have a nicer result. For decking boards, we recommend to use a countersink. It will give a nice result and the screw won't leave rough spots during assembly. For placing hardwood foundations posts, we recommend to use an auger for minimum 2/3 of the post's length. You can usually rent an auger from known tool rental companies in The Netherlands. When pre-drilling hardwood be careful that you don't use dull drill bits. This causes too much friction, which increases the risk of the drill bit snapping off.A sharp drill bit is therefore required to deliver good work.

With that menacing nameplate and character on the base bike, I have to say it looks stunning in black and with custom 3D-printed parts. Rough Crafts went for a more retro aesthetic with the Monster, opting for the 3D printing to make up the construction of the tank, fairings, and tail. Rough Crafts made a new frame for the 821, a duplicate from a prior project and crafted around the venerable L-Twin powerplant.

Rounding out the build is a set of twin tubes from SC Project—slimmer than stock, but still in the two-into-two configuration and with exceptional finishing to boot.

The more you order, the more you save on delivery costs. Enter your country and postcode to calculate the delivery costs.

Rough Crafts also went to Simon Fiber Craft to make the carbon fiber dress-up parts, Rover Works Custom Paint for the recolor, and more element six can be found in the wheels, a set of BST carbon rims to be precise. Wrapped in Pirelli Diablo Rosso IV Corsa tires for grip and Berringer plus Moto Master braking components replacing the Brembo stuff.

Another build is in the books for Winston Yeh, this time it’s a steed from Italy that he got his hands on. Yeh worked on a Ducati Monster 821, completing the build and naming it “Bologna Dogfight.” The direction of the build is Café Racer, achieved by simple body lines, copious attention to detail, and black—lots of black.

The spiral wood drill bit is sometimes also called the standard wood drill bit. Most people who only have a small selection of drill bits at home own at least a spiral wood drill bit. Don't you have a spiral wood drill bit yet and you would like to order one? then simply order one at Hardhout Discount.

The more you order, the more you save on delivery costs. Enter your country and postcode to calculate the delivery costs.

Placing an order at www.hardhoutdiscount.nl is easy, safe and quick. What you see online, is also what you get delivered, no confusion but an honest and straightforward approach. That's the way we like to do business with clients, we hope this way appeals to you and are looking forward to see your orders or questions so we can provide you with a beautiful piece of hardwood or related wood products.

As the name hinge hole drill bit already suggests, these wood drill bits are used to drill holes to fasten a hinge to it.

We purchase wood drill bits and other hardware directly from the supplier/importer.Our current supplier is known for his quality, no Conrad, Gamma or Praxis quality, but professional tools at a lower price. You should pre-drill every type of hardwood and use special hardwood screws. You can only buy these materials at our store or another specialised company. Our range offers wood drill bits, spade drill bits, spiral drill bits and auger drill bits. In various thicknesses and lengths. If you are not sure which one to buy, don't hesitate to ask for our advice, we are happy to help.

The bike is devoid of any bright colors, even on the shock spring. Even the Öhlins rear mono-shock wasn’t exempt from the Rough Crafts’ aesthetic, with the signature yellow on the spring being traded for black. Yeh also fitted two LED headlights nestled in the front fairing from Koso. Other custom parts also include CNC-machined parts from Aritek Ltd. That CNC part is the top of the triple tree, and the lower is a CNC Racing part. Damping duties are handled by an Andreani cartridge kit inside the upside-down fork, while the switch gear was carried over from the stock Monster’s equipment. Even if the switches are stock, they’re installed on Motogadget handles, installed with Beringer fittings, and protected by CNC Racing lever protectors.

Lastly, there are our worm drill bits. We have 200 products of this frequently used drill bits in our range, they all differ from each other in terms of product type, application and price. By offering various products in various price ranges, we try to make sure that everyone can order the best worm drill bit. Whether you have a big or a small budget: everyone should be able to use the best tools.

We’ve covered a number of Yeh’s work from his build house, Rough Crafts. Other projects include other Bologna-born models like the XDiavel “Flatout Titan,” the Honda CB1100 “Oriental Uppercut,” the BMW R 18 “Berlin Barnstormer,” and a few others.

Formwork drill bits are extra-long drill bits with a shaft that has a smaller diameter than the drill bit itself. Do you need a formwork drill bit to DIY at home or at work? Then just order this drill bit online.

The Monster 821 was launched in Mid 2014, and it was the Italian brand’s sport-naked offering with an 821cc Testastretta L-Twin engine that had a listed power output of 109 hp and 63.4 foot-pounds of torque. The 821 followed Ducati's “Il Mostro” formula with the trellis frame and upright but rather sporty ergonomics first pioneered in the 90s.

Do you regularly DIY in and around the house or are you a professional handyman? Then you often need wood drill bits so you can carry out your DIY jobs properly and complete your projects successfully.