Image

These have a sharp point on the end to help grip the wood when beginning to drill. They also have a sharp double-bladed thread which helps keep the hole straight and clean when drilling through timber. They can be used to drill fast through timber of any type as well as plasterboard (and even some plastics) and are mostly used for drilling holes for dowels when a clean parallel hole is required. The sizes for this drill bit range from 3 to 10mm.

Carbon Steel bits are specifically made for drilling wood and should never be used to drill metal as they would just shatter. It’s probably a waste of time buying these in my opinion – stick to HSS. If you do want to go down this route you can head to Amazon for a good selection.

Image

These bits come in sizes ranging from 0.4mm, up to 12mm, but are only really designed to drill small holes with not much debris output. The tinier sizes do snap easily, so extra care is required when drilling. If drilling a larger hole or drilling into hardwood, withdraw the bit occasionally to remove the debris and not clog up the hole. Also, personally, when working with wood, I prefer using dowel drill bits.

When starting your DIY journey, I’d recommend at least having a good set of HSS twist bits and some masonry bits, however for more than just your basic holes in the wall, you may want to expand your collection to include the more specialised wood bits as covered above. Good drill bits are also worth investing in and should be taken care of and sharpened often as a sharp drill bit cuts better and with much less effort and gives you a much cleaner hole.

Real Homes is part of Future plc, an international media group and leading digital publisher. Visit our corporate site. © Future US, Inc. Full 7th Floor, 130 West 42nd Street, New York, NY 10036.

It’s not often you’d need a wood drill bit for walls, as you can drive screws straight into wooden studs for a superior hold, but when working with plasterboard or working with timber on other building projects, you’ll come across a few different types of wood bits to get the job done right. The most common you’ll find is a spur point bit, commonly known as a dowel bit.

Jasmine Gurney is a DIY pro, inspiring women with power tools via her home improvement blog Oh Abode and on Realhomes.com.

These can be used on several materials including wood, metal and plastics and will likely be your most used type of bit for different DIY projects. The pointed tip cuts through material and the spiral length allows the material to be drawn out of the hole and keep the bit straight as you drill. They come in two types - HSS or Carbon Steel.

There are also other common types of wood drill bits you may come across for your projects: a countersink with clearance drill bit, a flat wood bit, a plug cutter, a hole saw and a forstner bit.

HSS (High-Speed Steel) can be used in any material, so are the ones you’re most likely to use, however they can withstand high temperatures caused by friction which allows them to be used on metal. Most HSS twist bits are gold in colour thanks to the Titanium nitride coating which helps them self-lubricate when drilling into metal. HSS bits can be found easily on Amazon or at your local DIY store.

Image

When you're entering the world of DIY, knowing about the different types of drill bits is a must. Whether you're building a bespoke built-in bench or adding a little shelving, using the wrong drill bit for your project could cause damage not only to your drill bit, but also to your entire project and/or wall.

Featuring a larger angled tip, masonry drill bits are used to bore into brick, concrete, quarry tiles, stone, and breezeblock. These are best used on a slow rotational speed to prevent overheating and can be used in hammer mode and in gear 1 for tougher jobs. You will need to pull out the bit from the material often to prevent dust build up as this can make drilling more difficult and cause overheating. These bits range in size from 4mm to 16mm and can come in huge lengths of up to 400mm to enable you to drill through walls.

If you're installing shower tiles or tiling a wall, you, might find yourself having to drill through ceramic tile, porcelain, or even glass. A standard drill bit will crack and chip the material. Tile bits feature a spear-like point which helps cut into the material and prevent cracking and chipping. These usually range in sizes from 3mm to 10mm.

There are four main types of drill bit you can use for your DIY antics and it's key to know their characteristics to ensure your project goes 100% to plan.

When using a combi drill or other type, the four main bits you’ll come across or need for your walls are a masonry bit, a wood bit, a tile bit, and a twist bit. Drill bits from different brands will look slightly different but they will still feature the same main characteristics to help you distinguish between them.