When the hole is established, you can move the hardware or lumber out of the way and continue boring to the hole’s full depth. When drilling mounting holes in long pieces of wood or metal, drill one mounting hole, then drive a screw at that point. Level the workpiece, drill a second hole, and drive a second mounting screw. With the workpiece fastened at two points, and level, drill remaining mounting holes and drive the remaining screws.

Amateurs and professionals alike often forget that safety and drilling a high-quality hole go hand-in-hand when fastening to concrete.

We’ve been in business since 2008 covering tools, writing reviews, and reporting on industry news in the construction, automotive, and lawn care industries. Our Pro reviewers work in the trades and have the skills and experience to know whether tools can perform well in the field.

You can find many types of drill bits made with an equally diverse amount of coatings and compositions. When it comes to the best drill bits for metal, however, only a few materials hold up well over time.

It may be simple and generally safe to fasten to concrete, but it’s always a good idea to wear safety glasses, if nothing else to shield yourself from the dust that’s produced in the process.

The job’s bad reputation was well earned but is out of date. Years ago, fastening to concrete was difficult and hit or miss. If you’ve ever tried driving hardened-steel nails into concrete or tried to make anchor sleeve holes with a wobbly rental masonry drill and a dull rental drill bit than you know about frustration.

Our team grabs Irwin Unibit Cobalt Step Bits for any quick thin metal drilling applications. The cobalt blend gives these bits a much longer life. Since step bits are both expensive and extremely difficult to sharpen, we like them to last as long as possible.

These bits drill quickly through concrete then continue right through rebar. You really can’t find much else on the market that competes at this point, so it’s an easy recommendation for productivity. We believe in charging your accessories to the job—so if a simple bit can save you time and money, it’s a huge win in our book. Pricing goes anywhere from $6–$206.

Clearly, the best drill bits for hardened metal or steel come with a cobalt blend. These cobalt drill bits use an alloy including 5%–8% cobalt. This cobalt makes up part of the steel blend, so the hardness of the bit doesn’t wear off with a coating (like titanium bits). It runs throughout the entire bit.

Many less expensive cobalt drill bits use M35 steel which has a 5% cobalt blend. M42 steel uses an 8% cobalt blend. This gives it a greater hardness. It also lets you drill at higher speeds than the M35. Irwin sells an M35 cobalt set as well if you don’t plan to drill hardened steel.

We already wrote our opinions on the best drill bits overall—covering wood, metal, concrete, and more. In this go-around, we wanted to identify the best drill bits for metal applications. That includes hardened steel, stainless steel, aluminum, and more. We even wanted to see which drill bits worked well for drilling out hardened bolts as you might find in an engine block. People also ask us about bits that handle drilling through rebar. These are the bits we turn to and should steer you in the right direction.

Next, wear a dust mask. Pulverizing conctete with a drill bit creates dust, and some of that dust becomes airborne while drilling and, later, when you clean out the hole.

Each year, we bring in and review more than 250 individual products. Our team will put our hands on hundreds of additional tools at media events and trade shows throughout the year.

We work with more than two dozen professional contractors around the United States who review products for us on real job sites and consult with us on testing methods, categories, and weighting.

Ryobi puts out tons of new products every year, covering everything from tools to lawn care and even lifestyle products. […]

Lag shields are hollow soft metal sleeves that are driven into a hole. When a screw or bolt is driven into the cavity in the center of the sleeve, the fastener’s threads cut into its wall, which is softer than the steel screw or bolt.

Bosch CO21B 21pc Cobalt M42 Metal Drill BitFor Pros looking for a reliable kit that should last a long time while providing plenty of options, this 21-piece kit delivers.

However, whatever differences there are between the outer look or chemical composition, both hardened steel and stainless steel are quite difficult to drill into. Using a drill press is often the best way to get quality results.

Image

Turn the selector ring on the cordless drill, aligning the hammer icon with the white selector triangle. Move the drill’s speed selector switch to its top speed, 2 or 3, depending on the drill. Tighten the drill’s chuck on the masonry bit.

This tool makes short work of punching a reliable hole in concrete, mortar, brick, Portland cement plaster (stucco), and even many types of stone. Once you have that hole–properly known as a pilot hole– you can drive a masonry screw or bolt into it, or you can install a soft sleeve into which you can drive a wood screw or sheet metal screw. It’s that easy.

Use these bits when drilling tough, high-tensile strength materials like stainless steel—or even titanium. We opted for the D/A29J-CO-PC kit. It includes 29 bits in a shatterproof case. The round case makes it simple to remove the exact bit you need.

Many people struggle with fastening to concrete–and other masonry surfaces, such as brick and concrete block. Turns out, there’s nothing to it. The best way to fasten to it, especially for DIYers, is to just dill a hole and drive a screw.

With titanium nitride, you have to remember it only coats the bit. As the coating wears off the cutting edges, you pretty much have to replace them. Don’t use these bits for drilling hardened steel or stainless—not if you want them to last.

Drill bits made with a Titanium nitride coating resist corrosion and friction. It beats black oxide because it increases surface hardness and does a better job reducing heat while drilling through metal. For metal drilling, we recommend these as the bare minimum.

Irwin gives these bits a Speedpoint tip. It helps get the hole started quickly and reduces wandering. We also have to admit these became our best step bits for metal in part because Irwin laser-etched the measurements right on the inside of the flute. They don’t wear off quickly like other bits we’ve used.

The bits feature the expected 135° split point, which gives you a nice, steady, and productive drilling speed. The jobber length bits work perfectly in cordless drills for onsite drilling. They come manufactured to the National Aerospace Standard 907. Because of how hard they are, you can drill up to 30% faster than you can with conventional M2 high-speed steel bits. Drill America also doesn’t grind down the shafts on its larger bits—so you get more rigidity, but you also need a 1/2-inch chuck to drive them.

The 135° split point tip helps when starting your hole and larger sizes feature a Chip Breaker—a groove at the midpoint of the cutting edge that further reduces heat buildup. We love how quickly these bits drill and also how well they remove steel in tight, efficient spirals. The combination of the unique cutting head and the flute design landed these as our best drill bits for steel—particularly carbon steel.

Thanks to the cobalt steel blend, plan on sharpening these when the tips grow dull from use. The value of this kit makes these the best drill bits for steel.

The end result is information you can trust because of the editorial, scientific, and real-world professional experience we collectively utilize each and every time we pick up and test a tool.

The fastest way to drive a masonry screw is with the same drill driver that made the hole. Turn the drill’s selector to the drive setting, turn the clutch to the maximum number, and use a nut driver or drive bit to sock down the screw.

Roy Berendsohn has worked for more than 25 years at Popular Mechanics, where he has written on carpentry, masonry, painting, plumbing, electrical, woodworking, blacksmithing, welding, lawn care, chainsaw use, and outdoor power equipment. When he’s not working on his own house, he volunteers with Sovereign Grace Church doing home repair for families in rural, suburban and urban locations throughout central and southern New Jersey.

Because they work effectively in both metal and wood, any Pro looking for a general-purpose set of hole saws should quickly fall in love with their productivity. It vastly outperforms bi-metal blades and tackles those materials carbide wood hole saws can’t (or shouldn’t) touch. You can buy kits from $105-$190

stainless can actually harden up as it heats—so drilling slowly often helps you get through the material more efficiently. Use cutting oil or similar lubricant when drilling into stainless and apply enough pressure to see a steady removal of material. Even the best drill bits for stainless steel heat up over time, so be prepared to monitor heat buildup.

The thing that changed all that is the ordinary cordless drill. More specifically, the cordless drill with a hammer function.

We’ll provide more than 500 pieces of new content this year absolutely free for our readers—including objective evaluations of individual tools and products.

Sleeve anchors are hybrid fasteners consisting of a threaded stud, a nut, and a specialized sleeve. You hammer this fastener into the hole then turn the nut no more turns than specified by the manufacturer (typically two to four). This causes the threaded stud to pull up in the sleeve. As it does so, the the sleeve expands against the wall of the hole, forming a tight wedging action. It’s important to read the manufacturer’s instructions before installing these. They are to be located specified distances from each other and from the edge of the slab.

Ryobi 22pc Titanium Twist Drill Bit KitHomeowners should get a lot of use from this set—and the hex shanks work well with impact drivers.

We consult with innovators in the technology and design of tools to gain a broader grasp of where these products fit and how they work.

When we talk about drilling in hardened steel, we mean medium or high carbon steels typically made using a heat-treatment and tempering process. Hardened steels are durable and can be wear-resistant, corrosion-resistant, and abrasion-resistant. Much of the steel materials that we see used in mechanical engineering, energy generation, and transportation are basically hardened steel. The best drill bits for metal could be designed for these hardened steel applications or they might be optimized for speed in softer carbon steels.

To make it even better, you get a nice kit with clearly labeled bit sizes. The largest bits also feature the DeWalt Pilot Point which presents walking at the start of drilling.

With the carbide drill bit chucked in the drill, hold what you need to fasten to the wall and make your hole. For brackets and the similar pieces of hardware, use their mounting holes to place the drill bit. For wood, simply bore right through the wood and into the concrete.

DeWalt puts out tons of new products every year, covering everything from core contractor tools to specialty trade-focused ones. It […]

Listed in our best drill bits article, Milwaukee Red Helix cobalt bits use a variable flute design that clears away debris quickly. How quickly? About 30% faster than most other 135° split-tip bits we tested against. Their unique design not only helps them drill efficiently, but it also aids in cooling. The trade-off is that these bits thin out more towards the tip. Milwaukee countered this by making them a bit shorter than some others we’ve seen. However, they also extended the flutes lower towards the shaft. The result is a more compact bit with a similar drilling depth.

Wear your safety glasses during every step of the process. Concrete chips can fly, a masonry screw may inadvertently break, you might even snap the drill bit itself if it gets bound up against a piece of reinforcing steel. All of this can cause debris to go flying.

Our best Cobalt drill bits for metal drilling are made from an alloy of 8% cobalt (M42). You can also find these bits with a 5% cobalt blend (M35). Since the cobalt is blended into the steel, it doesn’t wear away like a titanium or black oxide coating. That also means you can sharpen them with something like the Drill Doctor 750X drill bit sharpener before having to replace them. This helps save money when you buy these more expensive bit sets. Cobalt bits are our go-to for drilling through metal—particularly hardened steel and stainless steel.

When drilling a hole with a cobalt bit, add a drop of oil on the metal to keep the cutting edge cooler as it cuts. You also want to consider placing some wood underneath the steel if possible. This lets you cut cleanly through the material and not strike a surface below which might dull the cutting edge.

Hammer set anchors are simple fasteners that fit through a hole in whatever you are fatsening, such as a shelf cleat, bracket or other piece of hardware. Their dome-shaped head bears down on the surface of the workpiece. Slip the fasteners through the wokrpiece, into the hole in the concrete and then drive the nail in them until it is fully seated against the dome-shaped head. These fasteners work best when used in applications where one is enough to attach the load. Using more than one on at a time requires careful drilling to ensure that the fasteners line up both with the holes in the mounted object and in the concrete.

Which brings us to the case. If you do a lot of drilling—the case your bits come in matters. Accessing bits can be frustrating (we’re talking to you Milwaukee!) or hugely successful—like with this Irwin three-tier swing case. We love the easy-access bits, and you can easily tell the sizes from the front of each bit. Overall, this $179 kit gives you the best drill bits for metal applications of all kinds.

You can also sharpen these bits—another huge advantage. That matters once you realize cobalt drill bits cost significantly more than other types of twist drill bits. Unlike black oxide or titanium bits, you want to reserve these bits for when you need them.

Image

When he's not playing with the latest power tool, Clint DeBoer enjoys life as a husband, father, and is an avid reader—especially the Bible. He loves Jesus, has a degree in recording engineering, and has been involved in multimedia and/or online publishing in one form or another since 1992.

A masonry drill bit has a tip made out of tungsten carbide, brazed onto the body of the drill. The bit is capable of withstanding the high impact and wear created by drilling into concrete and masonry. A high-strength masonry screw can be driven directly into this hole. Another fastening option (shown below) is to insert a plastic or metal sleeve into the hole and drive a screw into the sleeve.

If you plan on drilling hardened metal or steels, we love the Irwin 29-piece M-42 Cobalt bit kit as our best metal drill bit set. Honestly, it’s not the fastest drilling bit that gets it our nod. It has to do with the use of M42 high-speed steel and its excellent case.

Many cordless drills today are equipped with a hammer function. I’ve talked to people who didn’t even know this was included on their drill. Compared to a cordless drill without this feature, it’s a slight upcharge–about $20, on average. A hammer function provides a percussive action to chip away and pulverize masonry as a masonry bit spins. To help these specialized drill bits withstand such harsh use, they have a piece of carbide brazed to their tip. Carbide is not a single material, but a mixture of them. It starts out as carbide powder intermixed with a metal powder, such as tungsten. The powders are mixed with a binder additive, formed into a shape, machined, and then fused together at high temperature forming a composite. The carbide tip is brazed onto the body of the drill bit producing a device that is both flexible and wear resistant, yet has an extremely hard tip. Drill a hole with that bit, then drive a hardened masonry screw into it.

Ever check out a “review” site and you can’t tell if they actually tested the tools or if they’re just “recommending” the Amazon top sellers? That’s not us. We won’t recommend anything unless we’d use it ourselves and we don’t care who the primary retailer is. It’s all about giving you a legitimate recommendation and our honest opinion of each product.

Image

Spyder uses a proprietary Mach-Blue plating on its drill bits. Likely a form of Titanium Nitride and Aluminum (TiAlN) coating, it helps retain sharp cutting edges and reduce heat build-up. This should deliver faster cuts and help extend the life of the bit.

That’s okay! We know personal preferences take a front seat in determining the best drill bit, and every Pro is different. Do Pro Tool Nation a favor and tell us what your top pick is and why you love it. Feel free to put it in the comments below or on Facebook, Instagram, and Twitter!

Some heavy-duty plastic anchors, such as the Red Head Polyset, can be driven into a hole in concrete. From there, you use the included pan head sheet metal screw to fasten whatever you need.

Drill America makes M42 cobalt bits that held up really well in drilling through anything we threw at them. After testing with a multitude of materials, we selected their jobber bits as our best drill bits for hardened steel.

The Milwaukee Hole Dozer with Carbide Teeth really wins for metal drilling. It can tackle stainless steel and certainly anything softer or milder than that. These are the best hole saws for metal drilling that electricians, HVAC, and/or MRO Pros can use.

You can make your own concrete fastener for horizontal applications by using a small bolt or piece of threaded rod embedded in mortar, epoxy repair mortar, or the specialized epoxies used for embedding rebar. Drill a hole twice the diameter of the threaded rod or bolt. You can either place the fastener in the hole and then push the filling material in around it or with thinner materials, fill the hole to the halfway point and then push in the fastener. Be sure to turn the fastener back and forth to ensure that it is locked into the embedding material. Also, use a square from two directions to check that the fastener is square or plumb to the surface.

A simple dust mask works well enough to protect you from airborne cement dust created when you drill into concrete and when you remove it.

Sometimes you need to drill through steel…but that steel is buried in concrete. For those applications, you need something like the Diablo Rebar Demon SDS-Max and SDS-Plus bits. We like the design better than Bosch Rebar Cutters because you use the same bit to drill the hole and penetrate the rebar. With Bosch, you drill using rotary hammer mode, switch to the Rebar Cutter in rotary-only mode, and then return to your original bit to finish the hole.

Looking at the best-selling metal drill bits on various trusted retailers helps when shopping. You often run into the best value, and we find the less expensive kits often find themselves at the top of these lists. We dropped links to what was at the front at the time we were writing, but they change often, so be sure to click the buttons to see what’s hot right now.

Black oxide drill bits also tend to dull quickly. We also recommend avoiding inexpensive steel drill bits that lack any sort of coating. While those bits may do well in softer steel, they can quickly dull and require frequent sharpening to continue to perform. In most cases, you get what you pay for.

Stainless steels are steel alloys consisting of at least 10.5% chromium and there are different grades. As a low-carbon steel, stainless steel has a natural hardness that comes without traditional hardening. Because of rust and stain resistance, good luster, and low maintenance, it has many commercial uses including cookware, cutlery, home appliances, construction fasteners, and surgical instruments.

Pro Tool Reviews is a successful online publication that has been providing tool reviews and industry news since 2008. In today’s world of Internet news and online content, we found that more and more professionals researched a large majority of their major power tool purchases online. That piqued our interest.

When it comes to the best value pick, we wanted a set of bits for basic metal drilling. The DeWalt DWA1240 14-pc Cobalt Drill Bit Set employs a nice cobalt blend that gives these bits more capability over titanium-coated bits. You get a nice set of 14 bits ranging from 1/16-inch to the commonly-used 3/8-inch.

High-Speed Steel (HSS) Drill Bits present an upgrade over older carbon steel bits. Able to hold up better to excessive heat and wear, they make up a majority of drill bits sold on the mass market. You can use these bits for just about anything—so they serve as a jack-of-all-trades for both wood and metal applications. HSS dulls very quickly when used on more abrasive material.

About Us Advertising Reprint Rights Tool Buying Guides Pro Tool Innovation Awards Tool Manufacturers and Tool Brands by Logo Pro Tool Reviews Writers and Editors Sign Up for Our Newsletter Contact Us

If you want to drill steel reliably, avoid anything made with low-carbon steel. Even generic high-carbon steel tends to work well for a little while—but quickly dulls and requires sharpening.