CNC Kitchen Threaded Inserts Set - Standard, 1 set - cnc insert

These are centre cutting end mills enabling the tool to plunge cut in the same way as a traditional slot drill (notice how one cutting edge is longer and passes slightly over the centre line).

40° and 45° Helix: Higher helix angles increase the effective shearing action and because the cutting forces are directed more vertically, tool deflection is reduced. Chip ejection is also improved thus reducing the amount of heat generated.

Sharper cutting edges are possible with uncoated end mills and these are recommended for machining aluminum, brass, plastics and other non-ferrous materials.

Three-flute end mills are often a good compromise between the high flute volume of 2-flute cutters and the greater strength and surface finishes of 4-flute cutters.

Some of these cookies are essential to make our website work whilst others help us to improve our service by giving us some insight into how the website is being used.

The ARC Premium branded range of end mills are made from a traceable grade of material. They are precision manufactured for consistency, quality and accuracy.

30° Helix: Generallly accepted as the industry standard for rigidity, sharpness and cutting edge strength. Adequate for cutting carbon steel and some tool steels.

40° and 45° Helix: Higher helix angles increase the effective shearing action and because the cutting forces are directed more vertically, tool deflection is reduced. Chip ejection is also improved thus reducing the amount of heat generated.

HSS-AL end mills are suitable for cutting copper, brass, iron, aluminium, hard steel and stainless steel at higher cutting rates compared to more conventional high speed steels. They also stay sharp longer and are suitable for general or heavy duty production applications.

Two flute end mills have a larger flute volume and therefore a higher chip carrying capacity. Suitable for higher stock removal rates where finish is not critical.

Two flute end mills have a larger flute volume and therefore a higher chip carrying capacity. Suitable for higher stock removal rates where finish is not critical.

TiAlN Coated HSS-AL End Mills Arc Premium TiAlN coated end mills are coated with the highly regarded Balzers Balinit® Futura Nano TiAlN (titanium aluminium nitride) coating offering high-performance machining and long tool life. Depending upon machine limitations, TiAlN coated end mills can operate at speeds up to 100% higher than uncoated end mills. Arc Premium TiAlN coated end mills are recommended for machining steel, cast iron and stainless steel. Click for more...

Three-flute end mills are often a good compromise between the high flute volume of 2-flute cutters and the greater strength and surface finishes of 4-flute cutters.

Some of these cookies are essential to make our website work whilst others help us to improve our service by giving us some insight into how the website is being used.

30° Helix: Generallly accepted as the industry standard for rigidity, sharpness and cutting edge strength. Adequate for cutting carbon steel and some tool steels.

The Balzers Balinit® Futura Nano coating offers outstanding properties enabling high-performance machining and long tool life.

Sharper cutting edges are possible with uncoated end mills and these are recommended for machining aluminum, brass, plastics and other non-ferrous materials.

In fact Balzers Balinit® Futura Nano not only out-performs uncoated cutters, TiN and TiCN coated cutters but also many other TiAlN coated cutters as well.

If you do not agree to such use, please refrain from using the website. Instead, we will be happy to service your requirements by telephone.

By using our website, you agree to the use of cookies as set out in our Cookie Statement. We appreciate some users may like more individual control over their visit to our website. You can read about these settings and how to control them in our Cookie Policy.

Centre Cutting: These are a centre cutting end mills enabling the tool to plunge cut (notice how two of the cutting edges are longer and pass slightly over the centre line).

The serrated cutting edges of roughing end mills are designed reduce cutting forces enabling higher feed rates and greater metal removal rates. The serrated edges also act as chipbreakers to create smaller chips for easier swarf removal.

By using our website, you agree to the use of cookies as set out in our Cookie Statement. We appreciate some users may like more individual control over their visit to our website. You can read about these settings and how to control them in our Cookie Policy.

HSS-AL end mills are suitable for cutting copper, brass, iron, aluminium, hard steel and stainless steel at higher cutting rates compared to more conventional high speed steels. They also stay sharp longer and are suitable for general or heavy duty production applications.

HSS-AL is a specific grade of high speed steel with high carbon content (1.05-1.20%) and a small amount of aluminium (0.80-1.20%) as part of its chemical composition. The carbon in the material gives it its hardness (HRC66~68), and the addition of aluminium increases ductility as well as aiding heat dissipation.

Centre Cutting: These are a centre cutting end mills enabling the tool to plunge cut (notice how one cutting edge is longer and passes slightly over the centre line).

Centre Cutting: These are a centre cutting end mills enabling the tool to plunge cut (notice how one cutting edge is longer and passes slightly over the centre line).

The ARC Premium branded range of end mills are made from a traceable grade of material. They are precision manufactured for consistency, quality and accuracy.

In fact Balzers Balinit® Futura Nano not only out-performs uncoated cutters, TiN and TiCN coated cutters but also many other TiAlN coated cutters as well.

If you do not agree to such use, please refrain from using the website. Instead, we will be happy to service your requirements by telephone.

The serrated cutting edges of roughing end mills are designed reduce cutting forces enabling higher feed rates and greater metal removal rates. The serrated edges also act as chipbreakers to create smaller chips for easier swarf removal.

HSS-AL is a specific grade of high speed steel with high carbon content (1.05-1.20%) and a small amount of aluminium (0.80-1.20%) as part of its chemical composition. The carbon in the material gives it its hardness (HRC66~68), and the addition of aluminium increases ductility as well as aiding heat dissipation.

These are centre cutting end mills enabling the tool to plunge cut in the same way as a traditional slot drill (notice how one cutting edge is longer and passes slightly over the centre line).

TiAlN Coated HSS-AL End Mills Arc Premium TiAlN coated end mills are coated with the highly regarded Balzers Balinit® Futura Nano TiAlN (titanium aluminium nitride) coating offering high-performance machining and long tool life. Depending upon machine limitations, TiAlN coated end mills can operate at speeds up to 100% higher than uncoated end mills. Arc Premium TiAlN coated end mills are recommended for machining steel, cast iron and stainless steel. Click for more...

Centre Cutting: These are a centre cutting end mills enabling the tool to plunge cut (notice how two of the cutting edges are longer and pass slightly over the centre line).

The Balzers Balinit® Futura Nano coating offers outstanding properties enabling high-performance machining and long tool life.