Cutting insert DED.0002.05-D AL41F full radius for ... - full radius grooving insert
from ø1.18mm cut dia 3 & 4 flute versions Reach up to 30mm Standard Thread Forms Available Full & Partial Profile ISO, Full Profile UNC/UNF, BSW/BSF, BSP
from ø12mm cut dia 3 and 6 teeth inserts Reach up to 56mm Standard Thread Forms Available Full & Partial Profile ISO, Full Profile Whitworth
⺠Cutting Speeds ⺠Cutting Data ⺠Additional simmill information⺠Simmill Thread Milling Technical Information ⺠Chamfering Cutters
⺠Cutting Speeds ⺠Cutting Data ⺠Additional simmill information ⺠Simmill Thread Milling Technical Information ⺠Chamfering Cutters
⺠Cutting Speeds ⺠Cutting Data ⺠Additional simmill information ⺠Simmill Thread Milling Technical Information ⺠Chamfering Cutters
from ø9.7mm cut dia 3 and 6 teeth inserts Reach up to 42mm Standard Thread Forms Available Full & Partial Profile ISO, Full Profile Whitworth
from ø39mm cut dia End mill, shell mill & disk mill cutter versions Standard Thread Forms Available Full & Partial Profile ISO, Full Profile UN
from ø21.7mm cut dia 3 and 6 teeth inserts Reach up to 90mm Standard Thread Forms Available Full & Partial Profile ISO, Full Profile Whitworth
⺠Cutting Speeds ⺠Cutting Data ⺠Additional simmill information ⺠Simmill Thread Milling Technical Information ⺠Chamfering Cutters
⺠Cutting Speeds ⺠Cutting Data ⺠Additional simmill information ⺠Simmill Thread Milling Technical Information ⺠Chamfering Cutters
from ø12mm cut dia Multi-tooth cutters available Reach up to 105mm Standard Thread Forms Available Full Profile ISO, UN, Whitworth, BSPT/R, NPT, NPTF
⺠Cutting Speeds ⺠Programming Examples ⺠Recommended Tool & Insert Combinations for Metric Threads ⺠Recommended Tool & Insert Combination for Other Threads ⺠Taper Thread Preparation Cutters ⺠Chamfering Cutters
from ø2.3mm cut dia Helical & Straight Flute versions Standard Thread Forms Available Full Profile ISO, UNC, UNF, UNEF, UNJ, Pg, BSW, BSF, BSP/G, BSPT/R, NPT, NPTF
from ø17.7mm cut dia 3 and 6 teeth inserts Reach up to 66mm Standard Thread Forms Available Full & Partial Profile ISO, Full Profile UN, Whitworth
from ø1.55mm cut dia Reach up to 3x thread dia For cutting up from the bottom of the thread Standard Thread Forms Available Full Profile ISO, UNC, UNF, UNJ, MJ, BSP
⺠Cutting Speeds ⺠Cutting Data ⺠Additional simmill information ⺠Simmill Thread Milling Technical Information ⺠Chamfering Cutters
⺠Cutting Speeds ⺠Cutting Data ⺠Additional simmill information ⺠Simmill Thread Milling Technical Information ⺠Chamfering Cutters
18581906093