Image

You need to examine the drill bit shank and ensure it’ll be grasped perfectly by the chuck of your drill. However, choosing a drill bit that’s compatible with your drill does not necessarily mean that you have to buy bits of the same brand. No!

Consider the type of job you want to do; ensure the bit you choose is compatible with your drill; refer to your pilot chart to know the bit size and length needed; ensure you go for masonry drill bits and avoid the cheap ones.

You should, however, avoid bits made of substandard material regardless of the quality of concrete you’ll be drilling. They’ll overheat quickly and do a shoddy job.

M213 STREAKERS feature three extremely large flute cavities, unique end face and gashing, and 37-degree helixes to achieve deep cuts and high feed rates, according to the company. IMCO’s special end face and flute grinds create a free cutting action allowing aggressive plunging and ramping moves.

The choice of drill bit largely depends on the project at hand. If you’ll be drilling small holes into light concrete or artificial stones, you can go for any masonry drill bit.

Image

Perrysburg, Ohio, USA – IMCO Carbide Tool Inc. has launched a new series – M213 STREAKERS – designed to handle extreme tool paths in aluminum alloys and provide superior surface finishes in aerospace industry applications.

Image

This is another important question that you should ask yourself. You should choose a drill bit that is compatible with your drill type.

Choosing a drill bit that matches your project’s needs can be confusing and time-consuming because of the diverse drill types available. It’s much more complicated than you might think.

M213 STREAKERS also feature improved corner strength for longer tool life, micro-fine cutting edges, and high-polish flute faces. M213 STREAKERS are available uncoated with square, corner radius and ball nose ends, as well as chip management system (CMS) and neck relief options.

The good news is that they rarely overheat and are highly durable. You can also use them to drill holes in timber is you need to.

While some are meant for wood, others are specially designed for glass, metals, and masonry projects. Therefore, you want to ensure that the bit you pick is meant for masonry.

Cheap bits are usually made of substandard material and have a history of overheating and shattering when subjected to pressure. Buying them is a waste of your hard earned money, not to mention that they can ruin or delay your project.

It’s important to ensure the bit you choose has exactly the same size as the hole you are going to make. Going for a bit that is a little bit larger than the hole you wish to create is also fine.

Some drill bits are made of high-speed steel (HSS). These bits are a bit more expensive than those made of low carbon steel.

IMCO’s online ToolBot generates customizable cutting parameters. Customers answer the prompts and are provided with results customized for their machining task and machine. “As with all IMCO advanced technology, ToolBot helps give our customers the edge in a competitive industry to achieve higher productivity and profitability,” Osburn said. “That’s what we do best.”

In this piece, we are going to discuss tips that will help you pick drill bits that match your project needs. The tips will also help you avoid the mistakes that most buyers make when selecting masonry drill bits.

If you’re dealing with hard concrete and natural stones, ordinary drill bits are not for you. Go for drill bits that have tungsten carbide or durum tips. They are usually stronger, more efficient, and penetrate hard surfaces better and faster than the typical drill bits.

If you do all this, you will be able to pick the right masonry drill bit every time you visit a drill bit store. Check out our drill bits for brick work or our products page for various tools and building supplies.

If you go for a drill bit made of HSS, however, make sure it’s coated with carbide, diamond powder, or even titanium carbon nitride. This helps make it tough and good for masonry. The coating also helps reduce corrosion and wear.

“Milling in aluminum has unique challenges, especially for aerospace parts,” said Matt Osburn, Vice President, Technical Director for IMCO.  “So we’ve focused our advanced technologies on making customers’ work easier and faster with end mills specially designed for milling deep slots, running steep ramp angles with high feed rates on entry moves, and plunging at high feed rates without a peck cycle, and providing a superior surface finish as part of the package.”

When selecting a drill bit, you have to consider the material it’s made of. There are masonry drills bits made of low carbon steel. These drill bits are cheap and can be used to drill soft surfaces.

When it comes to length, there are standard lengths, but there also long masonry drill bits that range from 300 to 400 mm.

In most instances, you’ll need a drill bit of standard length, but like we mentioned, there are longer bits if you need something longer.

Regardless of the of the type drill bit you choose, the golden rule here is to ensure that you pick a drill bit that is made of a high-quality and durable material, which is coated with carbide, diamond powder or titanium carbon nitride.

These drill bits are effective in penetrating stones, concrete block, solid concrete, and other hard and soft materials found in the construction world.

Yes, it’s good to consider the price when buying drilling bits, but that does not mean that you should go for cheap bits.

You can even carry your drill to the store to try the bits before you buy them. This will help ensure you don’t make any mistakes.

This will make your job easy and smooth. It’ll also help ensure that your drill will never be damaged by discordant drill bits.