Famous St. Andrews ‘Road hole’ provides quirkiest challenge in golf - hole spot angle corner
Makino offers innovative processes, solutions and machining platforms to address today’s aerospace market demands: five-axis, milling, EDM, grinding and the effective engineering and service support you need to maintain your robust and reliable operations.
IB85 is a fine grain Polycrystalline Cubic Boron Nitride grade. The small grain size enables grinding a very sharp cutting edge and achieving high surface quality, which provide excellent tool life. The IB85 grade can be used for machining a wide range of difficult to machine materials at high cutting rates and provides excellent tool life. IB85 contains 85% PCBN with Al Co and W binder. It is a very strong and tough material which can be used for heavy roughing and interrupted cuts.
The new LNAR 1106PN-R-S-W ID5 PCD tipped wiper insert has a very large frontal radius and sharp cutting edge. It provides a uniform clean-cut edge and excellent surface finish of less than Ra 0.3 μm. The new insert can be used on standard face mills or the new axially adjustable face mills with one or two wiper inserts (most recommended).
The range of materials covered by IB85 includes hardened and cast steel of over 45 HRc, grey and nodular cast iron, powder compacted and sintered metals and heat resistant alloys.
Keep up to date with the latest news, events, and technology for all things metal from our pair of monthly magazines written specifically for Canadian manufacturers!
Easily access valuable industry resources now with full access to the digital edition of Canadian Fabricating & Welding.
ISCAR’ s new TANGMILL ID5 PCD wiper insert and 2 HELIMILL inserts tipped with IB85 PCBN were created for machining cast iron and a wide range of difficult-to-machine materials at high cutting rates.
ISCAR’s new HELIMILL insert ADKW 1505 PDER IB85 has an IB85 PCBN brazed tip and can be used on 90°milling cutters for semi-finishing and finish machining on cast iron. The insert features a 0.8 mm corner radius and a honed cutting edge (0.03 mm). It can be used on the standard F90AD...-SFR or the E90AD ...-HSK63-S axially adjustable milling cutters. By adjusting the axial position of the inserts, it is possible to obtain a 0.3-0.7 μm surface finish.