These drill bits are effective in penetrating stones, concrete block, solid concrete, and other hard and soft materials found in the construction world.

Some drill bits are made of high-speed steel (HSS). These bits are a bit more expensive than those made of low carbon steel.

While some are meant for wood, others are specially designed for glass, metals, and masonry projects. Therefore, you want to ensure that the bit you pick is meant for masonry.

Image

The good news is that they rarely overheat and are highly durable. You can also use them to drill holes in timber is you need to.

When it comes to length, there are standard lengths, but there also long masonry drill bits that range from 300 to 400 mm.

If you’re dealing with hard concrete and natural stones, ordinary drill bits are not for you. Go for drill bits that have tungsten carbide or durum tips. They are usually stronger, more efficient, and penetrate hard surfaces better and faster than the typical drill bits.

If you go for a drill bit made of HSS, however, make sure it’s coated with carbide, diamond powder, or even titanium carbon nitride. This helps make it tough and good for masonry. The coating also helps reduce corrosion and wear.

Image

Image

Regardless of the of the type drill bit you choose, the golden rule here is to ensure that you pick a drill bit that is made of a high-quality and durable material, which is coated with carbide, diamond powder or titanium carbon nitride.

The Seco solution:The special open flute shape, chip splitters, internal coolant channel and proprietary ANF PVD coating of ACS540/ACS540R end mills keep chips at a manageable size, quickly evacuating them from the cut zone and preventing them from adhering to tool cutting edges.

When end mill flutes pack with gummy aluminum chips, milling operations can come to a complete standstill. ACS540/ACS540R 5 flute end mills keep chips under control and out of the cut zone. Proprietary open flute shape handles chip evacuation while chip splitters break up chips into a manageable size. Internal coolant channel provides efficient chip flushing and proprietary ANF PVD coating posses excellent lubricity to keep workpiece material from sticking to the cutting edge and marring surface finishes.

Your challenge:Material removal rates, tool life and part surface finish quality all suffer when gummy aluminum chips pack end mill flutes.

If you do all this, you will be able to pick the right masonry drill bit every time you visit a drill bit store. Check out our drill bits for brick work or our products page for various tools and building supplies.

In most instances, you’ll need a drill bit of standard length, but like we mentioned, there are longer bits if you need something longer.

In this piece, we are going to discuss tips that will help you pick drill bits that match your project needs. The tips will also help you avoid the mistakes that most buyers make when selecting masonry drill bits.

You need to examine the drill bit shank and ensure it’ll be grasped perfectly by the chuck of your drill. However, choosing a drill bit that’s compatible with your drill does not necessarily mean that you have to buy bits of the same brand. No!

The Seco solution:To save money and optimize aluminum part machining, one ACS540/ACS540R end mill easily performs both advanced roughing and fine surface finishing operations.

Choosing a drill bit that matches your project’s needs can be confusing and time-consuming because of the diverse drill types available. It’s much more complicated than you might think.

It’s important to ensure the bit you choose has exactly the same size as the hole you are going to make. Going for a bit that is a little bit larger than the hole you wish to create is also fine.

Consider the type of job you want to do; ensure the bit you choose is compatible with your drill; refer to your pilot chart to know the bit size and length needed; ensure you go for masonry drill bits and avoid the cheap ones.

You can even carry your drill to the store to try the bits before you buy them. This will help ensure you don’t make any mistakes.

Your challenge:Separate end mills for roughing and finishing operations eat into profit margins when you process aluminum parts.

When selecting a drill bit, you have to consider the material it’s made of. There are masonry drills bits made of low carbon steel. These drill bits are cheap and can be used to drill soft surfaces.

This is another important question that you should ask yourself. You should choose a drill bit that is compatible with your drill type.

If you need one tool to rough aluminum parts and another to finish it, that’s neither efficient nor cost effective. ACS540/ACS540R 5 flute end mills allow for advanced roughing with long axial depths of cut and shallow radial depths at extremely fast feed rates, as well as fine surface finishing applications with faster feed rates. All that productivity with one tool reduces tooling inventories and job costs while adding versatility.

Discover the product range Don't let chips gum up your Aluminium milling operationsWhen end mill flutes pack with gummy aluminum chips, milling operations can come to a complete standstill. ACS540/ACS540R 5 flute end mills keep chips under control and out of the cut zone. Proprietary open flute shape handles chip evacuation while chip splitters break up chips into a manageable size. Internal coolant channel provides efficient chip flushing and proprietary ANF PVD coating posses excellent lubricity to keep workpiece material from sticking to the cutting edge and marring surface finishes. Your challenge:Material removal rates, tool life and part surface finish quality all suffer when gummy aluminum chips pack end mill flutes.The Seco solution:The special open flute shape, chip splitters, internal coolant channel and proprietary ANF PVD coating of ACS540/ACS540R end mills keep chips at a manageable size, quickly evacuating them from the cut zone and preventing them from adhering to tool cutting edges. More Aluminium milling, less toolingIf you need one tool to rough aluminum parts and another to finish it, that’s neither efficient nor cost effective. ACS540/ACS540R 5 flute end mills allow for advanced roughing with long axial depths of cut and shallow radial depths at extremely fast feed rates, as well as fine surface finishing applications with faster feed rates. All that productivity with one tool reduces tooling inventories and job costs while adding versatility. Your challenge:Separate end mills for roughing and finishing operations eat into profit margins when you process aluminum parts.The Seco solution:To save money and optimize aluminum part machining, one ACS540/ACS540R end mill easily performs both advanced roughing and fine surface finishing operations.  Discover the product range Contact Us

The choice of drill bit largely depends on the project at hand. If you’ll be drilling small holes into light concrete or artificial stones, you can go for any masonry drill bit.

You should, however, avoid bits made of substandard material regardless of the quality of concrete you’ll be drilling. They’ll overheat quickly and do a shoddy job.

Yes, it’s good to consider the price when buying drilling bits, but that does not mean that you should go for cheap bits.

This will make your job easy and smooth. It’ll also help ensure that your drill will never be damaged by discordant drill bits.

Cheap bits are usually made of substandard material and have a history of overheating and shattering when subjected to pressure. Buying them is a waste of your hard earned money, not to mention that they can ruin or delay your project.