Walter introduces its latest CBN insert grades. WBH20 is a grade well suited for ISO-H Group of material such as for hard turning applications. WBS10 is well suited for ISO-S materials, specifically nickel-based (such as Inconel), iron-based (such as Udimet) or cobalt-based (such as Hayens).

The shank is the nondrilling end of the bit that fits into the drill’s mandrel or “chuck.” For hex shank bits, the shank size of the bit chosen (typically ¼ inch, ⅜ inch, or ½ inch wide) should match the chuck size of the drill.

The Bosch bits’ tapered tips can quickly penetrate the metal, balance the bit, and produce a clean, even hole. The set includes 21 bits ranging in size from 1/16 inch to ½ inch and is packaged in a plastic storage case.

It’s not a bad idea to clean drill bits after using them. After drilling, wipe away any residue on the bit with a soft cloth and then rub a bit of cutting fluid on it before storing it.

These bits are made for hard use. Their construction is durable, retaining an edge while drilling through thick ¼-inch steel. The no-spin shank prevented the chuck from slipping, boring right through the metal without stopping. They also stayed cool while drilling.

This kit comes with 14 bits from 1/16 inch to ½ inch, all of which are made of high-speed steel. The smaller bits have rounded shanks while the larger bits have no-spin shanks. Each bit features the brand’s “black and gold” coating designed to keep them from rusting. Everything stores away in a see-through case, helping to keep the bits organized and easy to find.

Most drill bits fit both standard corded and cordless drills. While these small pieces of metal all look pretty similar, each type of drill bit is designed to make holes in specific materials—including wood, plastic, and metal—but won’t work as well on other materials.

Researching shank design, bit material, and bit coatings can be confusing, but fortunately, drill-bit manufacturers make shopping relatively easy for the customer. Drill bits are labeled not only by the size of the hole they’ll drill but also by the type of materials they’ll drill.

Articles may contain affiliate links which enable us to share in the revenue of any purchases made. Registration on or use of this site constitutes acceptance of our Terms of Service.

Folks who need to drill a few holes in some metal surfaces but don’t want to break the bank on a set of expensive drill bits may prefer the DeWalt DWA1184 black and gold drill bit set. This set of all-purpose bits can drill wood, plastic, or metal and features 135-degree split-point tips to help prevent walking.

While we’re not huge fans of general-purpose bits typically, especially when it comes to drilling metal, these Bosch bits were excellent. They didn’t walk when starting a hole, and they removed long shavings of metal, proving they remained sharp while drilling. We were so shocked that these bits were this good that we kept drilling with them to see if it was a fluke. They drilled holes faster than the other bits in the test, which really surprised us.

Image

Home improvement centers often dedicate an entire aisle to drill bits, which come in a plethora of types and sizes for drilling holes in a variety of materials. Many drill bits can pierce through more than one type of material, but not all drill bits can drill through metal without heating up and snapping in half. Labels on drill bits indicate the type of material for which they’re suited, so it’s easy enough to find ones that are designed to drill metal. Depending on the type of metal the user is drilling through, some bits suit the task better than others.

Whether you’re just getting into metalwork or you want to expand that drill bit set, adding metal drilling bits to an arsenal of tools is a good investment. If drilling through metal is a new endeavor, there may be some questions that need answering.

To be 100 percent upfront, we have never liked DeWalt drill bits. We have found that they’re usually relatively low quality and pretty much “throwaways.” But this particular kit was incredible when it came to drilling metal. They didn’t walk at all, and they cut long, continuous, spiraled shavings—the sign of a sharp bit. The rounded shanks on the smaller bits did spin a little, but the no-spin shanks on the larger bits were great. Each bit stayed cool with a spritz of lubricant and remained sharp throughout the test. And, surprisingly, this budget kit drills through wood faster than some of the much more expensive drill bits in the test.

While we don’t have an immediate use for a dozen ¼-inch drill bits, we do like that a full-time shop can order enough bits from Drill Hulk to replace their most commonly used sizes without purchasing a whole kit that contains unneeded sizes. However, we did notice that these bits can walk slightly, despite the 135-degree split point.

Some shank designs are more conducive to drilling through metal than others. Most shanks for this type of drill bit are either no spin or hex.

These bits are made from high-speed steel for strength, and they feature a titanium coating for reducing friction and increasing durability. The kit comes with a carrying case with a foam insert with recesses for each bit and a spring-loaded center punch for marking the holes’ locations.

Then we moved to some heavier-duty 7-gauge flat stock, again testing how each bit made it through the test. We did our best to maintain similar speeds and pressure throughout each portion of every test. Afterward, we did our best to hand sharpen each of the larger bits with a file. The bits that passed these tests were given awards based on their strengths.

First, we drilled into some relatively light-duty 11-gauge steel angle iron, testing a few bits from each pack. We wanted to see how well they’d retain their edge, how hot they’d get, and how long it would take them to bore a hole in the metal.

When looking for a set of high-quality drill bits for metal, you may want to consider the Irwin 63137 set of bits. Made from cobalt high-speed steel, they’re designed specifically for hardened steel. They have 135-degree split-point tips, helping them to resist walking when starting a hole. They also resist wear and heat, making them a solid choice for drilling through metal materials. Bit sizes range from 1/16 to ½ inch wide, and the bits larger than ⅜ inch wide have reduced shanks.

Drill bit coatings affect how a drill bit operates. Most metal drill bits are usually coated with titanium or black oxide. This coating is designed to reduce friction, which keeps the drill bit from heating up and eventually breaking. Because the coating reduces friction, it can also help increase drill speed.

OSG’s master class of advanced performance tooling solutions for drilling, milling and threading. Unsurpassed performance for an extensive range of materials and applications. Quality, reliability and satisfaction. Bring your A Game with OSG’s A-BRAND®.

It depends on what kind of metal you’re drilling through. Titanium bits are suitable for drilling through soft metals such as aluminum, while cobalt bits are better suited for drilling through hard metals like cast iron.

Look for the words “metal drilling bit” on the package, followed by a list of metals the bit is designed to puncture. Here are a few additional tips that will help drill smoother holes and keep bits in tip-top shape.

Bits that drill through metal are further classified by the types of metal they puncture. For example, some bits are capable of drilling through ferrous metals, such as cast iron, and others through nonferrous metals, such as copper and tin.

Glenda Taylor is a BobVila.com staff writer with a background in the residential remodeling, home building, and home improvement industries. She started writing for BobVila.com in 2016 and covers a range of topics, including construction methods, code compliance, tool use, and the latest news in the housing and real estate industries.

These bits did a fine job of drilling through our test materials. They didn’t walk when we started the holes, and they bored through the metal at a reasonable pace. The case itself has a cheap plastic tab to keep it shut, but otherwise, it does a good job of keeping these bits safe and organized. They stayed cool while drilling and retained their sharp edges even after several holes. Our biggest complaint is the rounded shank, as the small bits did spin a bit in the chuck.

Most drill bits are made from HHS, cobalt, or carbide. A bit’s material can influence how effective it is at drilling through different kinds of metals.

DIYers and pros who go through a lot of ¼-inch drill bits for their heavy-duty metalworking projects may benefit from the Drill Hulk’s ¼-inch cobalt steel set. This 12-pack of bits features jobber-style lengths, which means their lengths are relatively long compared to their diameters. They’re made from durable cobalt high-speed steel, feature 135-degree split points for drilling through metal without walking, and have a no-spin shank to prevent them from spinning in the chuck.

Through hands-on testing, we found a number of drill bit sets that rise above the competition and help make holes in myriad metals. Some of the results were truly surprising. For those of you working on a project that requires drilling through metal, read on to learn about the factors to consider before shopping for the best drill bits for metal.

Keep up to date with the latest news, events, and technology for all things metal from our pair of monthly magazines written specifically for Canadian manufacturers!

Image

The bits didn’t cut quite as fast as some of the other drill bits in the test, but they did retain their edge nicely. They also didn’t walk at all when starting the bit, and the tap size chart inside the kit could definitely come in handy. What we didn’t like was the fact that every bit, despite its size, features a rounded shank. But the sturdy case with a spring-loaded latch ensures this kit stays shut, and the rubber molding on the case can prevent it from slipping off of a work surface.

These are great bits, but we found they were better for enlarging holes than actually drilling them (at least when it comes to metal). If we started with another bit to drill the initial hole, we could quickly work up to the desired size with the Comoware (the tips of the bits themselves just didn’t seem sharp enough for metal). We liked that there are so many sizes in one kit, and the spring-loaded center punch worked well for locating the bit.

These drill bits are made from durable cobalt-alloy high-speed steel, helping retain a sharp edge while drilling. They all fit inside the sturdy hinged case with a spring-loaded latch to keep the kit closed when not in use. The case also has a tap guide inside to help you identify which bit to use for a particular bolt or fastener.

Those looking for an all-around capable set of drill bits may want to check out the Bosch black oxide metal drill bit set. Manufactured from high-speed steel and coated in black oxide, Bosch drill bits can withstand friction and heat so you can drill continuously without the bits heating up.

WBH20, with 50 per cent CBN content and optimized grain structure, is wear-resistant at medium cutting speed. With a T-land of 0.008 in. x 20° it was developed to enable components of hard ISO H materials up to 65 HRC, to be grooved efficiently and with low wear during either smooth or interrupted cut. Typical areas of application include the automotive and agricultural equipment industry, but also general machining and energy.

Add a drop or two of lubricating oil to the bit and then grab the broken end of its shank with a pair of pliers. Twist counterclockwise to remove the bit.

WBS10 grade was developed for aerospace materials, specifically super alloys from ISO-S materials group. It's designed for grooving materials such as Inconel on engine components, and in the oil, gas and energy industries, as well as general mechanical engineering.

Avid metalworkers looking for a quality drill bit set for their metal projects may want to upgrade to the Irwin 29-Piece cobalt-alloy steel drill bits set. This set includes 29 drill bits from a 1/16-inch bit to a ½-inch bit, with bits larger than ⅜-inch wide having reduced-size shanks so they can fit smaller chucks.

When it comes to enlarging hotels in metal materials, a step bit like the ones in this five-piece kit from Comoware is the tool for the job. This kit features five different sets of bits, each with a series of steps, totaling 50 sizes from one kit. Sizes range from ⅛-inch to 1 ⅜-inch wide.

We tested these Top Picks products to ensure that they had what it takes for drilling metal. To qualify as one of the best drill bits for metal, the bit needed to perform well in the metal that it’s designed to drill. Bits also need to be durable and able to withstand the friction and heat produced when drilling through metal. The following recommendations are all at the top of their class for metal drilling, and one (or more) may be an asset to your tool collection.

Image

Easily access valuable industry resources now with full access to the digital edition of Canadian Fabricating & Welding.

Many DIYers don’t bother sharpening their bits when the cutting edges become dull and they have trouble drilling a hole, but it’s tool maintenance worth doing. You’ll get a longer life out of your drill bits if you sharpen their cutting edges with a bench grinder.

The best way to drill through thick metals is to use a drill press rather than a handheld drill—a press best achieves a clean, smooth hole. Be sure to drill slowly and use cutting fluid to lubricate the bit, too. Let the bit cool down every few minutes to keep it from overheating and breaking.

We’re committed to testing and reviewing products so you can make an informed decision. Advertising does not influence our product reviews and it never will. We always focus our coverage on standout products and never hesitate to mention their flaws and quirks. By using our affiliate links, you’re supporting our work and helping us continue to provide expert analysis. Find out more about our product evaluation process.

Tom Scalisi has been in the trades for over two decades. He loves to share his knowledge of construction, home improvement, tools, techniques, and products with the readers of Bob Vila, This Old House, Family Handyman, and even his pest control blog.

With its light hone and medium CBN content (65 per cent) this grade is well suited for higher cutting speeds (800-980 sfm) in super alloys such as Inconel-718.

One of the best features of the Irwin 29-piece set is the range of sizes available. Each bit increases by 1/64-inch increments between 1/16 and ½ inch, meaning there is a bit for almost any size hole.

There’s only one good way to test drill bits for metal: We needed to put some holes in some metal! We grabbed some scraps of metal off our welding cart, chucked some bits into our drill, and started drilling.

We did dislike that the smaller bits have rounded shanks, as they can be a pain, particularly when the bit is about to drill all the way through the material. However, the large bits have no-spin shanks and do a great job of staying in place. The tips stayed sharp making hole after hole, and they remained cool to the touch during use (while using cutting oil).