Holder-inserts for UT-controlled machines - holder insert cnc

Advice: the insert cutters can be sharpened on a diamond stone, but then obviously one of the big advantages of these bits is lost: the exact dimensions of the edges and so the long-term repeatability of the cut.

Insert router bits are an excellent choice when precise repeatability is required. This cannot be obtained in normal router bits, because during every sharpening a little material is removed and the cutter becomes smaller. But when an insert in one of these bits becomes dull, you can just change it out for a new one. The indexable insert bits are especially rewarding if the bit is used frequently, as you save on downtime, sharpening and transport costs. Especially when using bits with a ring bearing, flush cutters for example, it is important that the blades are always in alignment with the bearing ring. This is guaranteed only with the insert bits, as with normal flush cutter bits, even after just the first sharpening, there is an offset, however slight. Another advantage for insert bits is that hitting metal imbedded in the wood can ruin a very expensive regular bit, but with these bits you can simply change the insert.

Another hint: the construction of these bits makes them slightly less balanced than standard router bits. All quality manufacturers of these bits, including Sistemi Klein, strive to minimize this, so that in practical, everyday use, you will normally not notice. But it is, even so, a good idea to use only relatively powerful, high quality, routers from reputable manufacturers when working with these bits, and to make sure the motor is powerful enough to do the job.

All shipping costs are calculated at checkout, depending on weight starting from $9.95 and increasing depending on the weight of your order.

Wallers Industrial Hardware dispatches same day on all orders placed before 2pm Mon-Fri for shipping within Australia. Delivery times within Australia may vary.

Feel free to contact our friendly staff with any questions in regards to shipping costs. Email info@wallersindustrial.com.au or give us a call on (07) 4633 3774.

Some inserts have more than one cutting edge, so that they need only be rotated when one edge becomes dull. Only when all the edges become dull must the insert be changed. Click on the "drawing" or "picture", links to see the cutters themselves.

The insert router bits on this site are suitable for use in all types of solid wood and wood products. The cutters are made of tungsten carbide by Sistemi Klein in Pesaro, Italy.

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Carmex Precision Tools Ltd. is a leading manufacturer of high quality cutting tools. Carmex specializes in the production of threading tools for turning and milling. The product lines here at Wallers Industrial Hardware include Thread Turning inserts and toolholders, Mill Thread inserts and tool holders, Mill-Thread Solid Carbide and Spiral Mill Thread.