The company's many years of experience in processing steels including stainless, aluminium alloys, non-ferrous metals, titanium and plastics are testament to its expertise and versatility. The use of modern CAD/CAM systems enables components to be machined quickly and cost-effectively to meet customer requirements.

Seeking to optimise the groove machining process, owner Jörg Bamann approached Horn application engineer Korbinian Niedermeier, who recommended a high-feed milling solution. The subcontractor has been using Horn products for two decades, so knows the supplier well.

Manufacturers face an age-old paradox: manufacturing efficiency versus quality. After all, higher efficiency risks compromising quality while focusing on quality can reduce productivity – and this dilemma is becoming more challenging.

Manufacturers face an age-old paradox: manufacturing efficiency versus quality. After all, higher efficiency risks compromising quality while focusing on quality can reduce productivity – and this dilemma is becoming more challenging.

The 42CrMo4 (1.7225) alloy steel billet, quenched and tempered to 1,000N/mm², requires a 40mm wide groove having a 240mm outside diameter and a depth of just less than 90mm to be rough-machined. The component is a key part of a hydraulic rotator, used in the construction and forestry industries for rotating attachments carried by excavators.

Tooling manufacturer Horn has introduced a new carbide insert grade, SG66, for turning components from steel that has been case hardened to 58 HRC. Due to the high flexural strength of the carbide substrate, the insert is also suitable for interrupted cutting.

The F-91W "was associated with nefarious practices on both sides," writes industrial designer Finn Magee, "serving as a bomb timer circuit for insurgents and as a criteria for rendition by western forces."

Interesting way of 'viewing' it. However, for me, being a long time supporter of Casio watches, I'll be very conscious of wearing a 'reverse' watch - and in doing so that's no longer a Casio.  Anyway, design is also a form of expression, very personal to the individual, very subjective.

Image

Carbide insert and cutting tool manufacturer Horn reports that an application at Jörg Bamann Mechanische Werkstatt – a job shop in Geretsried, Germany – is demonstrating that a Horn DAH high-feed, indexable-insert milling cutter in a B-axis lathe is able to helically interpolate a circular groove into a round steel workpiece 14 times faster than a toroidal mill.

Image

Unfortunately, like the Toyota Hilux the F-91W became ensnared with images of terrorism. Following the 9/11 attacks, when Al-Qaeda members were captured and shipped off to Guantanamo Bay, a staff training document from the facility warned of a connection between the ubiquitous watch model and its use in bombmaking. The watch's appearance was used, often unfairly, as evidence of guilt. (There's much press on this, but this Guardian article on the subject is a good place to start.)

TW Ward CNC Machinery (Ward CNC) is pleased to announce that Andrew Elliott has rejoined the company in the sales department and senior management team.

From 30-31 October, ITC will again be exhibiting at the Advanced Engineering Exhibition on Stand T171 in Hall 3 at the NEC Birmingham.

From 30-31 October, ITC will again be exhibiting at the Advanced Engineering Exhibition on Stand T171 in Hall 3 at the NEC Birmingham.

Tooling manufacturer Horn has introduced a new carbide insert grade, SG66, for turning components from steel that has been case hardened to 58 HRC. Due to the high flexural strength of the carbide substrate, the insert is also suitable for interrupted cutting.

Carbide insert and cutting tool manufacturer Horn reports that an application at Jörg Bamann Mechanische Werkstatt – a job shop in Geretsried, Germany – is demonstrating that a Horn DAH high-feed, indexable-insert milling cutter in a B-axis lathe is able to helically interpolate a circular groove into a round steel workpiece 14 times faster than a toroidal mill. The 42CrMo4 (1.7225) alloy steel billet, quenched and tempered to 1,000N/mm², requires a 40mm wide groove having a 240mm outside diameter and a depth of just less than 90mm to be rough-machined. The component is a key part of a hydraulic rotator, used in the construction and forestry industries for rotating attachments carried by excavators. Seeking to optimise the groove machining process, owner Jörg Bamann approached Horn application engineer Korbinian Niedermeier, who recommended a high-feed milling solution. The subcontractor has been using Horn products for two decades, so knows the supplier well. Jörg Bamann (right) with Horn application engineer Korbinian Niedermeier Mr Bamaan says: “Before switching to milling, we tried to produce the recess in the component by axial turning, but it didn’t prove to be viable. We tried tool solutions from various manufacturers, but none of them had the technical capabilities we needed. Turning resulted in long chips and, due to the large groove depth, caused vibration that negatively affected the life of the inserts.” Next, the subcontractor tried replacing the turning tool with a conventional, 5-flute, toroidal milling cutter with indexable inserts in the B-axis tool spindle of a DMG Mori CTX 800 TC turning-milling centre. The roughing process was faster than axial turning but resulted in vibration and a high level of noise. Furthermore, the machining time was still too long for Mr Bamann. About 100 minutes were needed to produce the groove and each cutter was able to complete only 30 components before the inserts needed to be changed, so further process optimisation was called for. Mr Niedermeier proposed a 40mm diameter, high-feed DAH mill with five triple-edged inserts. At a cutting speed (vc) of 150m/minute, the tool is helically interpolated into the rotating workpiece with a continuous infeed depth (ap) of 1mm and 0.8mm feed per tooth (fz). The new machining time for the recess is now just seven minutes per component, more than 14 times faster, and the life of the indexable inserts has increased threefold to 90 components per edge. Mr Bamann affirms: “We are very happy with the result. Using the high-feed milling cutter has reduced the cycle time considerably and the load on the machine has also decreased, as cutting pressure and vibration are lower. There is still more potential for machining improvement.” Established in 1964 and now in its second generation of ownership, Jörg Bamann Mechanische Werkstatt CNC mills and turns parts for customers in a variety of industries in batch sizes ranging from one-offs to series production. The company's many years of experience in processing steels including stainless, aluminium alloys, non-ferrous metals, titanium and plastics are testament to its expertise and versatility. The use of modern CAD/CAM systems enables components to be machined quickly and cost-effectively to meet customer requirements. Horn Cutting Toolswww.phorn.co.uk

If you find this article informative, consider subscribing digitally to PES Media for free. Keep up to date with the latest industry news in your inbox as well as being the first to receive our magazine in digital form.

Mr Bamaan says: “Before switching to milling, we tried to produce the recess in the component by axial turning, but it didn’t prove to be viable. We tried tool solutions from various manufacturers, but none of them had the technical capabilities we needed. Turning resulted in long chips and, due to the large groove depth, caused vibration that negatively affected the life of the inserts.”

Jaguar Land Rover (JLR) is investing £500m to transform its historic Halewood facility into a state-of-the-art production site for electric vehicles (EVs), the company announced in September.

Mr Niedermeier proposed a 40mm diameter, high-feed DAH mill with five triple-edged inserts. At a cutting speed (vc) of 150m/minute, the tool is helically interpolated into the rotating workpiece with a continuous infeed depth (ap) of 1mm and 0.8mm feed per tooth (fz). The new machining time for the recess is now just seven minutes per component, more than 14 times faster, and the life of the indexable inserts has increased threefold to 90 components per edge.

In an effort to return the object to its former innocence, Magee launched his Reworks project. "The Reworks came from wondering what a more positive appropriation of the watch could be like."

Image

Dustcontrol UK is set to exhibit its innovative dust extraction solutions at the Advanced Engineering Show 2024, taking place at the NEC Birmingham from 30-31 October.

Established in 1964 and now in its second generation of ownership, Jörg Bamann Mechanische Werkstatt CNC mills and turns parts for customers in a variety of industries in batch sizes ranging from one-offs to series production.

Mr Bamann affirms: “We are very happy with the result. Using the high-feed milling cutter has reduced the cycle time considerably and the load on the machine has also decreased, as cutting pressure and vibration are lower. There is still more potential for machining improvement.”

Next, the subcontractor tried replacing the turning tool with a conventional, 5-flute, toroidal milling cutter with indexable inserts in the B-axis tool spindle of a DMG Mori CTX 800 TC turning-milling centre. The roughing process was faster than axial turning but resulted in vibration and a high level of noise. Furthermore, the machining time was still too long for Mr Bamann. About 100 minutes were needed to produce the groove and each cutter was able to complete only 30 components before the inserts needed to be changed, so further process optimisation was called for.

Designed in 1989, Casio's iconic F-91W is an affordable digital watch with a long-lasting battery. Millions of units were sold and they're still being produced today, with a retail price of under $20.