WMX is always the first choice when it comes to applications using broad chips. Offers the highest possible productivity, a wide range of applications, and excellent outcomes.

The insert grade is chosen in large part with consideration given to the following criteria: the component material (ISO P, M, K, N, S, or H); the kind of procedure (finishing, medium, roughing) The working conditions of the machine (good, average, difficult)

Roughing Inserts: Combinations of a high feed rate, and depth of cut for the cut. Operations that need the most cutting-edge level of security.

Clearance angle, single-sided cutting, positive angle insert, low cutting forces, side clearance, and angle of clearance are some of the features that are included.

When choosing the form of the insert, consideration should be given to the appropriate level of accessibility for the tool’s entry angle. In order to ensure the insert’s strength and dependability, the nose angle should be increased to its maximum achievable value. Having said that, this aspect needs to be weighed against the several different cuts that have to be carried out. A big nose angle is robust, but it calls for a greater amount of machine power and has a greater propensity to vibrate. A tiny nose angle is weaker and has a smaller cutting edge engagement, both of which might make it more vulnerable to the effects of heat. A large nose angle, on the other hand, has a larger cutting edge engagement.

If the needed LE is known in advance, it may be used to guide the selection of the appropriate cutting edge length (L) and insert cutting length (IC) for the insert.

Insert with a negative rake angle, which may be utilized either double-sided or single-sided, has a high edge strength, has zero clearance, is the ideal choice for external turning, and is effective for heavy cutting situations.

In the following paragraphs, we will explain how to go about picking the most appropriate insert shape and grade for the particular duties you have. When selecting an insert, there are a lot of different factors to think about. In order to obtain effective chip control and machining performance, it is important to carefully pick the insert geometry, insert grade, insert shape (nose angle), insert size, nose radius, and entry (lead) angle.

Medium Inserts: Operations ranging from medium to light roughing. A diverse selection of depth of cut and feed rate combinations are available.

Finishing Inserts: Operations using finishing inserts should be performed at shallow depths of cut and slow feed rates. Operations that need just a little amount of cutting force.

Image

The geometry of the insert and its grade are complementary to one another. For instance, the toughness of a grade may make up for a lack of strength in an insert geometry if the insert geometry is designed properly.

The link that exists between the nose radius and the depth of cut is one factor that might have an effect on the vibrational tendencies. The radial forces that are responsible for driving the insert away from the cutting surface become more axial as the depth of cut increases. These forces are caused by the increase in the depth of cut.

The geometries of inserts may be broken down into three fundamental types that are most suited for finishing, medium, and roughing operations respectively.

A positive insert will have a clearance angle that is more than zero degrees, while a negative insert will have a clearance angle that is greater than zero degrees but less than ninety degrees (for example, 7 degrees of clearance). The negative type insert explains how the insert need to be constructed so that it will tilt appropriately when it is put in the holder.

Make use of wiper inserts to provide either a better surface finish while retaining conventional cutting data or a maintained surface finish while drastically increasing feed rate. The wiper geometry known as WMX is First Choice, and it serves as an excellent place of departure for the vast majority of applications. There is always a fruitful option available, even when the circumstances change. In the event that vibration issues arise, using a wiper shape that is positive will help reduce the amount of force required and keep production levels stable.

Image

When performing turning operations, it is essential to take into account the nose radius, sometimes referred to as the RE. Inserts are available for purchase in a variety of nose radius diameters in a wide range of sizes. The selection, which is controlled by the depth of cut and the feed rate, has an effect on the surface finish, chip breaking, and insert strength. Both of these factors are impacted by the selection.

WF: Improves chip control while also lowering the required fn/ap. Additionally, for reduced cutting pressures whenever vibrations are present.

Image

Determine the appropriate size of the insert based on the requirements of the application as well as the available area for the cutting tool in the application. When the insert size is increased, the stability also increases. Insert sizes typically greater than IC 25 millimeters are used for heavy-duty machining (1 inch). After completion, there is often the possibility of shrinking the size.

When it comes to selecting the appropriate insert, finding the insert that is most suited to the task at hand is just half the fight. The last step consists of choosing the most appropriate grade and chip breaker.

It is to one’s benefit to have a bigger percentage of axial forces than radial forces. Having more axial forces than radial forces. When there is a large radial force acting on the cutting process, it may have an adverse influence, which may result in vibration and a poor surface quality. This may be the case when there is an excessive amount of radial force acting on the cutting operation. As a general rule of thumb, you should choose a nose radius that is either the exact same size as the depth of cut or a little smaller size than the depth of cut.

Determine the necessary cutting length, denoted by the symbol LE, taking into consideration the entrance (lead) angle of the tool holder, the depth of cut, and the machine specification.

The two distinct types of inserts have certain similarities in their qualities, which are outlined in the following list:

Negative inserts are the most lasting and dependable solution for roughing and general turning applications because of the sturdy inserts shapes and thickness. This is due to the fact that negative inserts provide larger feed rates and deeper depths of cut than other kinds of inserts. When completing, the use of positive inserts is nearly always the optimum option since, in comparison to other kinds, they give lower cutting pressures. As a result of this, it is feasible to complete the cutting process at shallower depths, which will result in a reduction in vibration. The price of a positive and negative insert is practically the same; however, if you acquire twice as many cutting edges as you did before, the price that you pay for each cutting edge will be cut in half. This is because the price of an insert is determined by the number of cutting edges that are purchased. Get in contact with HUANA if you have any questions or concerns about positive angle inserts and negative angle inserts, or if you are interested in purchasing either kind of insert.