In the complex world of CNC turning operations, the right turning insert plays a vital role in ensuring success. It's not a one-size-fits-all decision, your unique shop and application needs dictate the right fit. Make the smart choice for your operation today, and let the right turning insert shape unlock your shop's full potential.

It’s often overlooked, or perhaps misunderstood, but selecting the correct turning Insert shape for an operation is the most fundamental first step to success. In this post, we will focus on the “go-to” workhorse insert shapes that are the most popular for job shop CNC turning operations:

Image

TechMet Carbides is an independent, privately owned company that began in 1998 with the goal of providing world-class tungsten carbide technology and products.

1. DCMT series, diamond-shaped outer circular blade, sharp edge. Wear-resistant, anti-collision, smooth chip removal, high processing efficiency. 2. Substitute imported brands, 10 capsules/box. 3. Stainless steel, steel parts, copper and aluminum, cast iron, wood, etc. 4. Finishing, semi-finishing and roughing

In this case, it’s a good idea to consider the size of your turning center versus the workpiece. If your lathe uses ¾” Shank tools (or less than ¾”), then you can lean much more toward 80° Trigons. The depths of cut are going to be lighter, as well as the cutting forces. If your lathe uses 1-1/4” shank tools, stay with 80° Diamonds. Your workpieces are big and you have a lot of HP at the spindle—therefore, you want the strongest and most stable 80° style insert. If your machine has 1” shank tools, then things are a bit more in the middle. The decision line is likely based on how much power you’re going to use on the cuts. If the cuts aren’t going to move the power needle much, then Trigons are fine. But if you’re going to run things hard and heavy, then it’s better to go for 80° Diamonds.

As a quick note: when referring to the number of edges on an insert, we will use the count for double-sided negative rake inserts. Naturally, if your applications need smaller, screw-down positive rake inserts, just consider that will mean half the number of edges as what is mentioned in this post.

Six-cornered 80° Trigon shaped inserts have the same included angle presentation to the workpiece as “C-Style” inserts. If your shop normally only uses the four 80° corners on a “C-Style” insert, the six edges offer cost savings potential. W-Style inserts are generally used on more moderate depths of cut and feed rates compared to C-Style inserts. It’s good to be aware that the seating of the insert in the pocket is not as stable as C-Style inserts. The included angle of the toolholder clamping pocket is 140°, which creates the opportunity for the insert to “move” slightly in the pocket. Also, remember that W-Style inserts cannot take as deep a depth of cut as similarly sized C-Style inserts.

As a final note, most of these recommendations are framed in terms of roughing and semi-finishing cuts. But what about finishing cuts?

Almost all CNC Turning Centers in job shops are horizontal. That means facing cuts are more stressful on the insert. The direction of cut is in the X-Axis, which is not as stable on a lathe as Z-Axis cutting. More importantly, the workholding stability is much lower in X-Axis cutting. This is the perfect time to utilize the 100° corner edges on C-Style inserts—especially considering the economics.

Now that we’ve established the baseline characteristics for our 3 workhorse shapes, are there any additional secrets, tips or rules to help choose which workhorse we should select for an operation? Not quite. It’s not possible to have 100% steadfast rules, as each shop and application has its own unique needs. But there are 3 considerations that can help you choose.

The company is the production of integral carbide tools and other products research and development, production, sales in one of the enterprises, the main products are integral carbide tool series, carbide welding tool series, carbide indexable tool series, carbide CNC blade series, all kinds of non-standard tools. The company always adheres to the market orientation, close to customer needs, and continues to introduce suitable for communication electronics industry, mold manufacturing industry, automobile industry, rail transit, aerospace, medical equipment and other mechanical processing fields, and has a good reputation in the mechanical processing industry. The company's core purpose: "quality, innovation, integrity, speed. " The company has sufficient inventory, superior quality, according to the different needs of customers to map to sample non-standard custom tools, sincerely welcome friends from all walks of life contact and cooperation, adhere to the cutting tool field innovation, forge ahead, to provide customers with quality products and services.

Triangles are a very versatile insert shape. They can be used for turning, facing, boring, copy turning and basic profiling. There is a very broad assortment of toolholders available with many different lead angle options. Triangles offer good economy thanks to their 6 cutting edges. T-Style inserts are an excellent choice for general boring due to very stable seating of the insert in the boring bar pocket and the extra side clearance between the insert and the workpiece bore (greatly reducing the risk of chip jamming). Keep in mind the 60° edge is measurably weaker than 80° diamond shaped inserts. Be sure not to use a triangle insert that is too large for the application, as the cost per edge can increase. For example, a 3/8” IC (Inscribed Circle) triangle insert (TNMG-33x) can manage up to .375” depth of cut in most situations with nearly the same insert strength—but a much lower cost—than a 1/2” IC triangle insert (TNMG-43x).

1. Are you a manufacturer? Do you have a factory?We are professional manufacturer with more than 10 years experience in this field.2. Can the price be reduced for large quantities?Yes, bigger quantity orders are cheaper.3. Do you inspect the finished product? Yes, every production step and finished product will be inspected by QC department before shipment.4. What is the lead time for mass production?Honestly, it depends on the order quantity and the season you place your order.5. Is free shipping available?If you buy a lot of products, the shipping fee is negotiated with the factory.6. Can you send the product to our forwarder in China?Yes, if you have a forwarder in China, we are happy to send the product to them.7. Can you produce special carbide tools?Of course, we can. The main market for our factory has changed from standard end mills to special tools since 2015. We will use special tools to produce according to your drawings and samples.

On jobs where you’re going to have a large number of roughing passes, normally the best choice is a Triangle insert. You’ll have plenty of cutting edge length to maximize the depth of cut and maximum economy with 6 cutting edges. You’ll also have the benefit of that extra clearance on the trailing edge side of the insert—which gives just that extra bit of room for the chips to escape the cutting zone. This is especially important for internal machining.

If the finishing operation could use any of the 3 workhorse shapes, which one is best? One way to look at is to use whatever you’re happiest with. Over time, we all develop our favorites. And that’s fine. Perhaps, though, it’s worth considering that finishing cuts are what it’s all about. That’s where we complete the workpiece to the specs on the drawing—size as well as surface finish. That means the biggest payoff will come from stability. We never want to be chasing specs because of our insert choice. Therefore, it makes some sense to lean heavily toward C-Style 80° Diamonds. They are very stable in the toolholder pocket and their indexability is excellent (meaning the new cutting-edge position will repeat very closely to the previous edge). Better indexability means less chasing dimensions with control offsets. Less chasing means a more stable process.

C-Style inserts have long been the most popular shape due to their high versatility. They have a strong cutting edge with very secure seating in the insert pocket. The 80° corners can be used for both turning and facing operations. The opposite 100° corners can be used for general roughing applications (especially facing), providing a maximum economy of 8 total cutting edges. The only real caution is that, with only 5° of clearance between the trailing side of the insert and the workpiece, chip jamming can occur when boring.