DCMT11T304 HQ CA6525 Fine to medium machining of stainless steel and steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.5~2.0mmFeed 0.08~0.20...

DCMT11T304 HQ CA5515 Fine to medium machining of steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.5~2.0mmFeed 0.08~0.20 mm/rev Grade information...

DCGT070204-FA-CU1000 These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited...

Image

DCMT11T304 MQ CA6525 Fine machining of stainless steel and steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.2~1.0mmFeed 0.05~0.15 mm/rev Grade...

DCMT070208 HQ CA6525 Fine to medium machining of stainless steel and steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.5~2.0mmFeed 0.08~0.16...

DCMT11T308 HQ CA525 Fine to medium machining of stainless steel and steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.5~2.0mmFeed 0.01~0.25...

Image

DCGT070202-FA-CU1000 (0.2mm corner radius) These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these...

DCGT11T304-AG These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited tosmall...

DCGW11T304 KW10 Suitable for cast iron, great for brake lathes. Suits boring bars S16Q-SDUCR-11 16mm BORING BAR S20R-SDUCR-11 20mm BORING BAR S25R-SDUCR-11 25mm BORING BAR S16Q-SDQCR-11 16mm BORING BAR S20R-SDQCR-11 20mm BORING BAR S25R-SDQCR-11 25mm...

DCMT11T304 HQ CA525 Fine to medium machining of steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.5~2.0mmFeed 0.08~0.16 mm/rev Grade information...

Image

DCGX11T308-AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited tosmall...

DCMT11T308 HQ CA6525 Fine to medium machining of stainless steel and steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.5~2.0mmFeed 0.01~0.25...

DCMT070204 HQ CA6525 Fine to medium machining of stainless steel and steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.5~2.0mmFeed 0.08~0.16...