“Peck” drilling is an option that can be used in situations when it is not viable to transfer fluids through the hole. This requires removing the drill from the hole, which will also remove chips from the hole, and then replacing the drill. Some machine shops like to employ a set of drills that gradually expand in length since doing so will increase the amount of time spent on each cycle.

Not so fast! said architecture critics and preservationists when news broke that the midcentury 270 Park Avenue tower in Manhattan's East Midtown, currently home of banking giant JPMorgan Chase, had quietly been selected—not for landmark designation—but for the chopping block.  Designed by... View full entry

2) The depth of the hole that has to be cut should be at least as much as the diameter of the workpiece. The system for the cutting fluid should be clear and functioning normally; On the machined end face of the workpiece, there should not be a central hole, and drilling should be avoided on the inclined plane; It is important to maintain the usual shape of the chip in order to prevent the production of strip chips that are straight; When processing the through-the-hole, make sure you use a higher speed. To minimize damage to the drill, limit the speed of the machine when it is close to breaking through the material, or stop the machine entirely.

There are a variety of applications for deep hole drills, and practically every industry uses them. Each of these applications has its own set of stringent criteria and one-of-a-kind problems, such as tight tolerances, difficult materials, and aggressive production targets.

In order to construct the apparatus needed for hydraulic fracturing, a block of steel is given a number of holes that need to be drilled into it. There is a need for machines and equipment that can meet the challenge posed by a substantial workpiece that also has accurate tolerances.

1) The coaxiality of the centre lines of the spindle and tool guide sleeve, toolbar support sleeve, workpiece support sleeve, etc. should fulfil the criteria in order for deep hole cutting and machining to be successful.

Image

Image

The behavior of the drill bit having a tendency to twist about the axis of rotation while it is working is referred to as the phenomenon known as runout. When the length of the drill is increased, there will be more runout, which will result in the hole having a wider diameter. It is simple for the axis of the hole to become off because of the excessive length of the drill pipe, its lack of rigidity, and its sensitivity to vibration. This has a detrimental effect, not only on the accuracy of the machining but also on the effectiveness of the manufacturing.

For high-precision, high-volume items, it is possible to make the many holes at the exacting tolerances necessary by using a 3-spindle gundrilling center that is automated with robotics and conveyors.

The actual drill that is used has to have the capacity to bore deep holes. The most important need is a central hole, which will be used to transport cutting fluid to the cutting tip. The cutting temperatures will drop as a result, and the chips will be expelled. Instead of having two cutting edges, a deep hole drill bit designed specifically for larger holes will only have one of those edges. This again helps remove chips from the surface.

Drill and shape the landing gear actuating cylinders using high-strength alloys while preserving an exceedingly tight straightness tolerance.

3) As a result of the maturation of the technology, the spindle of the modern deep hole drill is entirely comprised of an imported motor. This not only guarantees that there is adequate power, but it also enables the motor to be switched freely and correctly during high and low speed processing. In order to guarantee the dependability of the machine’s operation, an automated oil-cooling system has been included. This system ensures that the machine can maintain a temperature that is consistent throughout the processing.

The development of a “deep hole” in which the diameter is 10 times greater than the depth is required in a variety of industrial applications. In order to drill holes in a straight line, specialized deep hole drills with a particular tool for drilling deep holes is necessary.

The process of deep hole drilling is often carried out using specialized equipment designed specifically for the task. These machines are built and put together in a way that optimizes the procedures for straightness and efficiency. Deep hole drills are now capable of gundrilling up to a certain depth-to-diameter ratio because technological advancements have made it possible for them to be outfitted with high pressure, through-spindle coolant. UNISIG manufactures extremely competent BTA and gundrilling machines, some of which have applications with D:d ratios greater than 400:1.

After announcing Foster + Partners as design architect for its new 270 Park Avenue HQ tower a few days ago, JPMorgan Chase has now filed a zoning text amendment with NYC's City Planning department.  The document shows two options for a massive supertall tower to replace the current building from... View full entry

4) Since the deep hole drill is computer controlled, system compatibility is also getting better and better. This allows software such as CAD and CAM software to be compatible, which tends to make the machine in better operability, processing can be customized according to the particular job demand function, as well as deep hole drilling machines have become the favorite of the industry.

An activity referred to as “walking” takes place when the drill tip first makes contact with the workpiece in the process of drilling. If the surface being drilled isn’t exactly perpendicular to the axis of rotation of the drill, then the drill will be driven in that direction by a force that acts laterally (and a long, thin drill can bend slightly.) As a consequence of this, the hole will most likely be drilled at an obtuse angle and at the incorrect place. It is also possible that the drill will be harmed by this. Regardless of whether the surface is as-cast or has been rough milled, the possibility of the same event happening still exists.

The use of cutting fluid to maintain a cold cutting contact is an integral part of the vast majority of the processes that are involved in precision machining. It is not easy to get liquid all the way to the bottom of a hole that is quite deep. There is a lot of work that needs to be done. As a consequence of this, the temperature at the drill tip increases to the point where it has the potential to cause damage to the workpiece or even weld to it. It might be challenging to remove chips from the surface. If the chip chamber becomes clogged, the drill bit will experience damage as a result.

Banking giant JPMorgan Chase initially floated plans to demolish its current New York City home at 270 Park Avenue back in February, and this week's selection of Norman Foster as the design architect of the replacement building appears to seal the fate of the old tower.  Completed in 1961 and... View full entry

Deep hole drilling procedures make use of specialized tools and setups in order to supply high pressure coolant, remove chips in a clean manner, and achieve depth-to-diameter hole ratios in metal that are greater than what a standard CNC machine is capable of doing. Because of this, producers are able to consistently, accurately, and efficiently meet the production needs as well as the tolerances of their manufacturing processes.

The clock is ticking for the midcentury modernist HQ of banking giant JPMorgan Chase: despite preservationist and environmental concerns, the fate of 270 Park Avenue appears sealed, and the 50-story structure is likely to become the world's tallest building ever to be intentionally demolished... View full entry

[...] a demolition application was filed for 270 Park Avenue, the current, but not for long headquarters of JPMorgan Chase. The filing is a pivotal step for the bank, which plans to replace the 1.5 million-square-foot Modernist tower with a 2.5 million square foot supertall skyscraper designed by Lord Norman Foster. — CityRealty

The toolholder and the actual drill follow next in the sequence. The holder is responsible for maintaining the drill’s position on the axis, and the drill itself needs to be perfectly straight and symmetrical about the axis.

A hole is regarded to be deep if it has a depth-to-diameter ratio (D:d) that is larger than 10, and in general, holes with this ratio are considered to be deep. Deep hole drilling into metal has a variety of applications across a number of different industries. Its roots can be traced back to the requirement for gun barrels that were straighter and more accurate, and it expanded as other industries began integrating deep hole drilling processes to improve their own applications.

These spiral-flute deep hole carbide drills have an innovative flute geometry that was created for optimal chip evacuation from deep holes in a variety of materials. This geometry was developed for use by spiral-flute drills. The tools have a maximum coolant duct profile so that they can provide the cutting edge with the most effective possible amount of coolant. It guarantees both an effective supply of coolant to the cutting edge as well as optimum chip removal from the cutting area. Chips may be removed without any issues even from very deep holes thanks to the design features of this drill, which, when combined with the optimum cutting settings, result in clean cuts. Chip packing and the ensuing jamming of the tool are successfully avoided thanks to this feature.

270 Park Avenue, also known as the Union Carbide Building, is slated for demolition. Designed by Skidmore Owings & Merrill partner, Natalie Griffin de Blois, and completed in the early 60s, the mid-century office tower will be town down in order for the building's owner, JPMorgan Chase, to... View full entry

All of HUANA’s deep hole drills benefit from our use of cutting-edge technology, which enables us to achieve extremely tight tolerances and outstanding precision. Our services are both immediate and cost-effective, and we will provide you with an expert solution in the shortest amount of time possible thanks to the availability of a broad variety of deep hole drills. Please get in contact with HUANA as soon as possible for further details.

It is necessary to prepare the surface in order to prevent the drill from wandering. Milling a flat pad may be part of this process in addition to fixturing the workpiece to place the surface in a perpendicular position. Although beginning with a centre or pilot drill guarantees that the hole will be in the appropriate location, doing so requires yet another tool change.

[...] the second supertall to result from the Midtown East rezoning is moving forward, with JPMorgan Chase filing a text amendment with City Planning for a 1,400-foot tower on the site of 270 Park Avenue. Designed by Foster + Partners Architects, the plans also come with the first renderings of the 2.4 million square foot supertall, and massing diagrams that offer a look at what’s in store for New York City’s most central business district. — New York YIMBY

It is possible to drill holes in long workpieces with extraordinary depth-to-diameter ratios without making compromises the accuracy of the roundness or wall thickness of the holes. This is accomplished by using a drill bit with a larger diameter than its depth.

Earlier today, news broke that the De Blasio administration has hashed out a deal with JPMorgan Chase to demolish its existing headquarters at 270 Park Avenue, and replace the structure with a shiny new 70-story building. The deal was negotiated in the wake of the Midtown East rezoning, which loosened zoning regulations for the area in exchange for developers providing street-level and infrastructure improvements. — Curbed New York

Deep hole drilling comprises of BTA drilling and gun drilling, in addition to other procedures tailored for specific tolerance requirements and often carried out on BTA-style deep hole drilling equipment. BTA drilling is the most common type of deep hole drilling. Deep hole drilling is capable of attaining tight diameter control, straightness, and excellent surface quality in workpieces, and it is employed in a variety of materials ranging from aluminum to super-alloys.

3) Cutting fluid for deep hole machining: because the process of deep hole machining generates a significant amount of cutting heat that is difficult to dissipate, it is essential to provide an adequate amount of cutting fluid to lubricate and cool the tool. This is because the cutting heat is not easily dissipated. In most cases, the 1:100 emulsion or the severe pressure emulsion is the one that is chosen; Extreme pressure emulsion or high concentration extreme pressure emulsion is selected for use in situations in which high machining precision and surface quality as well as machining toughness materials are required. The kinematic viscosity of cutting oil is typically between 10 and 20 cm2/s at a temperature of 40 degrees Celsius, and the flow velocity of cutting fluid is between 15 and 18 metres per second; When the diameter of the machining is relatively small, you should use a cutting oil with a low viscosity; The ratio of cutting oil might be 40% EP vulcanised oil, 40% kerosene, and 20% chlorinated paraffin when doing deep hole machining that requires a high level of precision.

A celebration was held this week to mark the official topping out of the new 60-story JPMorgan Chase headquarters at 270 Park Avenue in Manhattan. Designed by Foster + Partners to feature the latest approaches ascendant in post-pandemic workplace design, the building is beset with flexible office... View full entry

It is feasible to correctly drill thousands of holes in a short period of time using a multi-spindle tube sheet drilling machine, maximizing productivity in the process. This is accomplished by drilling the holes one at a time.

The following are some samples of common applications, processes, and tolerances. These examples are not actual part, but they are representative of what is feasible when employing deep hole drills with the appropriate machine setup, tooling, and process understanding.

What has just been discussed is the reason why the deep hole drill is being utilized in the deep hole processing on an increasingly regular and widespread basis. Because of all of the benefits that it offers, the deep hole machine tool has quickly become the most popular piece of machinery in its field. In addition, as a result of advances in technological know-how, today’s machine tools are able to have their functions modified in accordance with the particular specifications of a given project, which is also a very useful feature.

2) Three axes of deep hole drills are now utilizing imported good stiffness and heavy load and high speed and accuracy of the ball in a straight line guide rail, so as to assure that continues on the deep hole processing, processing of high accuracy and the service life of guide rail, now using the process of deep hole drill can offer greater torque, so that more practically applicable.

Trepan holes may be drilled in long workpieces with extraordinary depth-to-diameter ratios without affecting the accuracy of the hole’s roundness or wall thickness. Trepan holes are named for the trepan tool, which was developed in the 19th century.

Image

JPMorgan Chase & Co.’s Jamie Dimon has said he wants to build a new world-class headquarters for the 21st century. Now he’s hiring the architect behind Apple Inc.’s futuristic offices to design the new Park Avenue tower.Foster + Partners will serve as the lead architect on the project[...]. It also designed 425 Park Ave., under construction a few blocks to the north. The bank didn’t disclose details of the design. — Bloomberg

To produce superior hydraulic cylinders, an existing bore should be finished to the point that it satisfies the requirements for a surface polish that is as reflective as a mirror.

1) The deep hole drilling machine is constructed of high-quality cast iron after secondary treatment, so the stability of the casting and accessories is extremely excellent, relatively strong stiffness, and it is thus much appreciated by users. Furthermore, the popularity of the deep hole drill is naturally connected to the technical innovation and maturity.

Four years after the project’s initial announcement, Foster + Partners has finally revealed designs for JPMorgan Chase’s new headquarters in Manhattan. At 60 stories, the 1,388-foot-tall tower will be the largest such development in the city and promises to feature an array of high-tech... View full entry

It is necessary to remove the material that was cut away at the bottom of the hole in order to make room for the drill to progress further. When drilling deep holes, these chips have a propensity to wind their way around the flutes of the drill and accumulate to the point where they scrape against the sidewalls of the hole. As a direct consequence of this, the temperature will build, which will ultimately result in the drill either failing or being jammed. Chip removal and bit wear can only be assessed by listening to the sound, observing the chips, monitoring the machine load, checking the oil pressure, and paying attention to a variety of other indicators. It is difficult to get a good look at the cutting condition itself.

Gasoline rails ought to have very small holes that are completely straight and won’t break when subjected to the pressure of the gasoline. The utilization of gundrilling makes it feasible to bore holes that are in accordance with these very stringent requirements, which are quite exact.

The machine tool is the first step in the production of precise and deep holes. On a CNC machine equipped with a spindle of superior quality, one may anticipate the best possible outcomes. Runout is reduced, and a high level of control is provided over the drilling cycle as a result of this. (It is important to bear in mind that when working with spherical components, it is often preferable to spin the workpiece while keeping the drill stationary, or even to have both components counter-rotating.)