“The bars are both vibration- and maintenance-free. Within the bar there sits a mass that's supported by a pair of elastic supports, inside of which sits a dampening fluid. This mass vibrates at a predetermined frequency during machining, attenuating the natural frequency of the bar around it to suppress vibration. There are no wear components to worry about [and] no tuning,” said Eichelberger.

The manufacturer has addressed this critical consideration by supplying machine-specific turret adapters, along with a special split sleeve bushing for maximum rigidity.

“There’s a reference flat on the top of the head that accommodates a visual angle finder,” Eichelberger said. “You just rotate the bar until the indicator reads zero, then clamp it in place.”

There’s more to the story than making the shop a quieter place to work, however. Eliminating vibration and therefore chatter extends tool life and improves surface finish. And when tools last longer, they can be pushed harder, increasing feed rates, cutting speeds, and depths of cut.

“That’s the goal of this product,” said Kennametal Global Product Manager John Gable. “The greatest stability possible and the most effective dampening solution available, period.”

Setting the head exactly on centreline is accomplished by bringing the angle finder to zero and then locking the bar in place.

“Perhaps the most important thing to know about the new bar is that it’s plug-and-play,” said Eichelberger. “There's no need whatsoever for tuning or adjustments; you simply pull it out of the package, mount it in the turret, and get boring.”

Easily access valuable industry resources now with full access to the digital edition of Canadian Fabricating & Welding.

“The portfolio for our imperial bars ranges from 1 inches in diameter up to four in., while the metric version starts at 25 mm and goes to 100 mm,” Gable said. “There are a variety of interchangeable head styles available as well, everything from screw-on, positive-rake inserts for fine-finishing needs to negative-rake, clamp-style geometries for heavy roughing.”

Anyone who’s ever struggled to get a boring bar exactly on centre will appreciate the fact that setup has been simplified.

The heads themselves for this tool also have changed and now are shorter and lighter. This helps provide greater stability, contributing to the bar’s improved performance, the company states. They’re also coolant-fed, precisely directing a stream of high-pressure coolant where it’s needed most. The result is improved chip control together with maximum cooling in the cutting zone.

It’s a sound that every machinist dreads: the high-pitch whine of a deep-boring operation complete with chatter loud enough to seep through even the best earplugs.

Sam Eichelberger, Kennametal product engineer for lathe systems engineering, is part of the team that developed the tool’s internal dampening mechanism.

Keep up to date with the latest news, events, and technology for all things metal from our pair of monthly magazines written specifically for Canadian manufacturers!

This vibration-free boring system also is essentially plug-and-play with an array of interchangeable heads, including screw-on and lever-style clamping mechanisms in positive- and negative-rake configurations.

Image

The MD133 milling cutter offers high process reliability and maximum productivity with an optimal metal removal rate with reduced machining times.

Image

It’s a problem that plagues many machine shops that produce long, deep holes, and it only gets worse in materials that are tough and more difficult to machine.

Kennametal’s new vibration-free boring system features interchangeable heads that include screw-on and lever-style clamping mechanisms in positive- and negative-rake configurations.

This calculator is a tool.  These calculations are based upon theoretical values and are only intended for planning purposes. Actual results will vary. No responsibility from 6gTools LLC is assumed.

Setting the head exactly on centreline is accomplished by bringing the angle finder display to zero and locking the bar in place.

The vibration-free system has been shown to offer better boring performance in applications up to 10xD, explained Eichelberger, which is much deeper than solid-carbide or heavy metal boring bars are capable.

To battle the vibration of deep boring, which can cause drifting, out-of-round holes, and poor surface quality, tooling supplier Kennametal has introduced a new boring system with a new anti-chatter mechanism and numerous indexable heads and shank sizes.

Considering the higher cost of such a boring system, it’s important that heads can be replaced in the event of a crash, avoiding damage to the bar itself. And users of the company’s older boring system will find that their new heads fit with the use of an adapter.

The anti-chatter boring bars have a serrated, bolt-on connection at the front of the bar that securely clamps a variety of styles and sizes of indexable heads.

Image