Finally, never, ever try to loosen the chuck by clamping it in a vice and pulling the trigger. With the force of some of today’s drills, even the strongest Pros don’t have the hand strength to keep the drill from whipping around and hurting their wrist and elbow.

Kenny holds a B.S. in Biology and a minor in chemistry. While that might not sound like a direct line into the power tool industry, his analytical and scientific mindset helps him design repeatable testing methods for Pro Tool Reviews’ head-to-head testing and offers highly objective comparisons in his reviews.

© Karnasch Professional Tools GmbH 2024, Theodor-Heuss-Anlage 12, 68165 Mannheim, Germany. Registry number: HRB 431152 ecommerce by red

Some people refer to an impact driver as an impact drill. 10 years ago, we might have argued that it’s the wrong term. However, today there are 1/4-inch hex shank drill bits specifically designed to work with your impact driver. Technically, that makes it an impact drill.

There are also collets with active bit ejection. They have a spring that pushes the bit out when you pull the collet so you don’t have to put your hands on a hot drill or driver bit.

Even though most modern chucks are keyless, there are some keyed models running around. The overall principle is similar, though.

Instead of a chuck, an impact driver has a collet at the front. To change a drill bit, pull the outer part of the collet out to release the bit that’s in there. You also pull it out to install a new one. Easy peasy.

Email Address * Please enter a valid Email AddressPlease enter a valid Email AddressThe Email Address entered is already registered, please sign in with the Email Address or enter a different one

Three warnings, though. All-metal chucks are pretty durable, but you can damage plastic ones with your adjustable pliers if you put too much force on the chuck.

Want to know more about the drill and impact driver we featured in this article? Check out the details on Milwaukee’s 4th generation M18 Fuel Hammer Drill and Impact Driver!

About Us Advertising Reprint Rights Tool Buying Guides Pro Tool Innovation Awards Tool Manufacturers and Tool Brands by Logo Pro Tool Reviews Writers and Editors Sign Up for Our Newsletter Contact Us

The Milwaukee M18 Bluetooth Jobsite Speaker Delivers Quality Sound All Day Long The perfect soundtrack can make everything better, including […]

By far the most common type of drill chuck today is a keyless chuck. Chances are, the answer to your question is in this section. Unlike your dad or grandpa’s old drill that had a funky-shaped key clamped to the cord, keyless chucks require no tools at all.

Image

Some impact drivers have upgrades that make the process even easier. There are designs with one-hand bit insertion that let you slide the bit in without having to pull the collet.

Some drill chucks have a ratcheting mechanism to help. If your drill does, you’ll feel and hear it clicking as the jaws tighten around the bit.

Pro Tip: If you change a drill bit and it wobbles funny when you pull the trigger, it might not be centered between the jaws. Loosen the chuck and make sure all the teeth are engaging the bit as you clamp them back down.

First, set the tip of the drill’s key into the matching hole on the chuck. You might have to give it a little turn so the teeth are able to slip together. From there, turn the key clockwise to loosen the chuck and counterclockwise to tighten it.

Pro Tool Reviews is a successful online publication that has been providing tool reviews and industry news since 2008. In today’s world of Internet news and online content, we found that more and more professionals researched a large majority of their major power tool purchases online. That piqued our interest.

Sometimes, a drill chuck can be so tight on a drill bit that it’s difficult to loosen it. In this case, your best bet is to grab a pair of adjustable pliers (Channellocks). Set them to a width that grabs the outside of the chuck and use the additional leverage from the handles to loosen it.

Image

When you’re installing a bit for the first time, loosen the chuck (clockwise) until it’s just wide enough to slip the drill bit into it. Then tighten it (counterclockwise) until you feel it begin to resist and then tighten a little more.

Image

Learning how to change a drill bit is very similar whether you have a Milwaukee, DeWalt, Black & Decker, Craftsman, Ryobi, or another brand of drill. However, there are several types depending on how you’re using the term “drill”. No matter what type you have, this guide can teach you what you need to know.

Keyless chucks tighten and loosen by simply spinning the chuck’s outer housing. As you’re holding the drill with the chuck pointing away from you, spinning it counterclockwise tightens the jaws around your drill bit, and spinning it clockwise loosens it.

Did you learn what you came for? If we didn’t answer your question, please leave us a comment and we’ll do our best to answer it for you!