If you already own a bench grinder, an attachment may be the best route to go. They’re far less expensive than a benchtop model, and you can achieve the same angles. They take a little longer to set up, but you won’t sacrifice any quality once you do.

If you’re drilling a hole for a screw in wood, you will need a drill bit that’s slightly smaller than the screw you’re planning to use so that the screw’s thread will tap into the material. If you’re drilling a hole more than 10mm in diameter, you may be better off with a completely different, more specialist type of drill bit, like a Forstner bit, a spade drill bit, or, for much better holes, a hole saw.

The sharpener comes with a diamond grinding wheel to handle high-speed steel, cobalt, or carbide bits with ease. It can also “split” the end of the drill bit, producing a more accurately drilled hole. It can sharpen drill bits between 3/32 inch and ½ inch to handle most drill bits in a standard set.

While you can sharpen every drill bit to one consistent angle, certain styles of bits work best at specific angles. It’s better to have a sharpener that you can adjust to the drill bit. Standard angles are between 118 and 135 degrees, so look for a sharpener that allows you to switch between the two for the best versatility.

Each sharpener is different, but you, or the jig, hold the bit at a specific angle relative to a grinding wheel. The grinding wheel removes metal from the tip of the drill bit until the edge is sharp.

We’re looking at the more commonly-used drill bits here and, to make the choice easier, we’ve broken them down into the type of materials they’re designed to drill through. Plus we’ve thrown in our top drill bit set that covers all the main options. We’ve looked at online reviews and ratings from a range of retailers to deliver our verdict.

Various types of drill bits use differently-angled cutting edges at their points. Bits reserved for wood have aggressive cutting edges to allow them to get through the material quickly. Bits for metal have flatter angles, allowing them to take off smaller bits at a time without overheating or chipping the bit.

The set is housed in a high-quality case which, despite being slightly tricky to prise some of the bits out of, is clearly labelled and sensibly laid out. The metal drill bits are HSS, the wood bits have sharp brad points, and the spade bits are titanium coated and have a square shaft to reduce slippage in the chuck.

Articles may contain affiliate links which enable us to share in the revenue of any purchases made. Registration on or use of this site constitutes acceptance of our Terms of Service.

Finding a drill bit sharpener that works with your drill bits of choice is important. For most homeowners, a standard drill bit sharpener will accommodate most of the bits in your workshop. These bits usually consist of steel or cobalt, and standard grinding wheels will sharpen them with ease.

We narrowed our research to include drill bit sharpeners that have only a select number of angles to drill at or a range of adjustable angles—though the extra adjustments can make it tricky to operate as well. Each selection on our list has online videos that can be used to help users learn how to properly use the sharpener. Finally, we included recommendations that had a number of different price points and levels of professional quality for both hobbyists and professionals.

The sharpener will work for bits between ⅛ inch and ¾ inch and is adjustable for many different drill point angles. It has several adjustments, one of which adjusts the height of the drill bit. This adjustment allows users to creep up on the perfect angle slowly for maximum accuracy. To create a perfectly centered point, simply roll the bit over between every pass.

Let’s get to the point: There are some things you need to know when shopping for the best drill bit sharpener. Not all models have the same capabilities or uses, so you need to be sure the one you choose will get the job done. Here are some factors worth considering.

It’s easy to spend plenty of time researching for your next drill, but it’s just as important to find the very best drill bits for your project. That’s because when it comes to drill bits, all things are most certainly not equal.

There are two popular power sources for sharpening your drill bits; plug-in electric and drill-powered (which may be electric or battery).

All bits are worth sharpening if you already have a sharpener. However, it’s not worth buying a sharpener to put an edge on a 1/8-inch steel drill bit.

Instead of throwing dull drill bits in the trash, you can restore their cutting edge with the best drill bit sharpener. These tools can help put a sharp point on an older drill bit, grinding the tip at the perfect angle. The result is a fast-drilling, clean-cutting drill bit that works as well, if not better, than new.

Whether you choose an electric benchtop sharpener or a grinder attachment, there’s a solution for your dull drill bits. Your drill bits will last much longer if you choose the best drill bit sharpener for your needs from this guide. Each of the top picks below was selected after an in-depth review of the market and thorough product vetting.

Generally speaking, DIYers will end up buying a drill bit set, rather than a single bit – although there are exceptions, particularly for specialty jobs such as when a masonry drill bit is required – so that will already have a few of the main sizes covered.

Drill bit sharpeners can make using drill bits safer. If you’re drilling with a dull bit, you’ll have to use more force to make any progress. A smaller bit can easily snap under pressure, which sometimes sends pieces of drill bit flying. While you should always wear safety glasses, flying bits of metal are never safe. A sharpener will help ensure that you don’t need to put much power behind the bit.

Most of the drill bits you’re likely to encounter will bear the abbreviation HSS, for high speed steel. It’s a steel, alloyed with a range of other metals, designed to withstand the extreme temperatures generated by drilling through harder materials at high speed, hence the name. But, despite the high breaking strength they exhibit, they’re also brittle and don’t offer much resistance to bending. Which means it’s easy to snap thinner bits with even the most innocuous of impacts.

There’s a lot that goes into shopping for one of these tools, but all the machines on our list below are worth considering. They’re easy to use, accurate, and can keep you from having to throw out the best (and occasionally expensive) drill bits in your collection.

For folks who already have a bench grinder, the General Tools 825 drill grinding attachment is an affordable way to take care of a pile of dull drill bits. This jig bolts to the worktop and uses the side of a grinding wheel to create sharp edges on old drill bits.

Though users may not be able to replicate the exact angle by hand, they’ll come close enough to drill effectively on larger drill bits. It will also handle all knife and scissor sharpening needs, as well as chisels and other cutting tools, though carbide bits are probably too much for this tool. It weighs just 53.6 ounces and is comparatively small, making it perfect for professionals and DIYers to transport.

The carbon steel shaft and tungsten carbide tip offers the sharpness and abrasion to cut through tougher materials. According to reviewers, the ease with which these Wickes items cut is impressive, especially given the price of these specialist bits.

To help us provide you with free impartial advice, we may earn a commission if you buy through links on our site. Learn more

Purchasing a drill bit sharpener that can handle all of the bits you commonly use should be a priority. While almost all sharpeners can handle small to mid-range bits, only certain models can handle the big stuff. Bits over 1/2-inch are expensive, so make sure that your sharpener can handle them.

Image

Tom Scalisi is a freelance writer, author, and blogger with a passion for building. Whether it’s a DIY project or an entire website, Tom loves creating something from the ground up, stepping back, and admiring a job well done.

If you purchase high-end carbide drill bits, then a standard grinding wheel won’t work. Carbide is extremely hard and requires a diamond wheel to sharpen correctly. If you keep carbide bits on hand, look for a sharpener that comes with diamond wheels. Or, purchase a bench grinder jig that you can set up with a diamond grinder wheel.

DIYers and professionals who need a portable drill bit sharpener will want to take a good look at the Drill Doctor X2 sharpener. This versatile and compact model weighs just 3 pounds and is small enough to fit inside a tool box or case. Made with an electric plug-in design, this Drill Doctor can be used anywhere it is needed and can sharpen drill bits, tools, knives, scissors, and more.

Value is the name of the game with this set from Bosch, at just a touch over £1 per drill bit. If there’s a letdown, it’s that there’s no 9mm bit in the set, but all the other main sizes are covered so it barely harmed the near-perfect score among Amazon customers. Each bit has a sharp brad point for improved accuracy, and the shoulder-cutters on the leading edge of the grooves are designed to reduce tear out.

The bits are stored in a fairly tough plastic case, which can also function as a stand to make selecting the correct bit easier. Each bit is clearly labelled in the case too. The round shanks are suitable for use in the majority of drills with a three-jaw chuck.

If ease of operation is important, you should consider purchasing an electric benchtop model. These are the most foolproof of the drill sharpener designs, and they will allow you to put a sharp edge on a drill bit in no time at all.

As for user-friendliness, this Wen also has a built-in work light, a quenching tray, dual eye guards, a large and easy-to-read on/off switch, an 80-grit wheel, and a 36-grit wheel, making it safe and ideal for drill bit sharpening as well as cleaning and deburring. Though this model has a steep price tag and isn’t the most portable option at 41 pounds, it offers durability and effectiveness for long-term use.

If you’re looking for a foolproof drill bit sharpener, the DD500X from Drill Doctor is as close as possible. This drill bit sharpener has two angle presets of 118 and 135 degrees. These presets allow users to choose the right angle for their drill bit type without worrying if they’re off a degree or two.

Drill bits aren’t cheap, but they do seem to dull quickly. Whether you’re drilling through dense hardwood or hardened steel, some drill bits seem to lose their edge within minutes of coming out of the package.

You can, but they’ll never be quite as effective again. Titanium bits have a coating that the grinding wheel will remove when sharpening. That’s not to say the bits are no good; they just won’t have the hard coating that makes them so useful.

If you’re continually working in your home shop or on a job site, having your own drill bit sharpener can save you quite a bit of money. Instead of throwing your old bits out, you can grind a new edge on the spot, or place them to the side and spend an hour grinding a whole set until they’re like new.

You will also want to look for a sharpener that can handle your smaller bits. While these bits are rarely expensive (depending on the material), they dull quickly and lose their performance right away. Instead, keeping one of the best drill bit sharpeners on hand will allow you to put a quick edge on a bit as small as 3/32-inch.

Those shopping for a bench grinder attachment that will help take expensive drill bits from dull to unbelievably sharp will want to check out the Tormek DBS-22. This drill bit sharpener allows users to adjust the angle from 90 degrees to 150 degrees and features an adjustable split angle.

Image

Smaller diameter drill bits tend to be easy to break, so it’s a helpful touch that Draper has doubled up on the 1.5, 2.0, and 2.5mm bits. And the inclusion of a 3.2mm bit, in addition to the 3.0 and 3.5mm bits, is helpful too.

Key specs – Number of bits: 50; Material: titanium nitride-coated, carbide-tipped; Sizes: 1.5-6.5mm (metal), 4-10mm (masonry), 4-10mm (wood); Case type: plastic carry case

We’re committed to testing and reviewing products so you can make an informed decision. Advertising does not influence our product reviews and it never will. We always focus our coverage on standout products and never hesitate to mention their flaws and quirks. By using our affiliate links, you’re supporting our work and helping us continue to provide expert analysis. Find out more about our product evaluation process.

Since it doesn’t create split points, Drill Doctor made it more compact so it can sit on a shelf without getting in the way. There are no angle adjustments, which makes this a great tool for those looking for a simple, straightforward drill bit sharpener.

If you’re looking for an electric benchtop drill sharpener that allows you to get the most out of your old drill bits, the Drill Doctor 750X is worth a look. Users can adjust the 750X for any angle between 115 and 140 degrees, which means this sharpener can handle almost any angle. It will also create an edge on the end of the bit called a “split” bit, which creates a sharp point to drill accurate holes.

Toughness is paramount when drilling into metal because the heat generated can easily spell the end for cheap drill bits. Not so here, as this set from Draper sees the HSS straight shank bits coated with long-testing and tough titanium nitride. They’re likely to last longer, and they will not get lost as they come in a soft-grip plastic case which is clearly labelled, making finding bits and returning them to their correct slot a simple task. It’s also finished in Draper’s trademark blue, making it easier to spot at the bottom of a tool bag.

Image

And carbide – usually tungsten carbide – is a similarly tough material, and is commonly used in the manufacture of masonry drill bits.

These recommendations have a range of capabilities to sharpen drill bits of varying sizes. Some drill bit sharpeners can accommodate bits as small as ³⁄₃₂ of an inch or as large as 1½ inches. Since users have unique needs, this list includes sharpeners that offer a solution for almost every commonly used drill bit.

For a start, drill bits are made from a number of different materials. And then the shape of the cutting face can be radically different depending on the material it’s designed to drill through. When you factor in price, the range of sizes available within a set, and the brand, the choice can be bewildering.

Drill bits aren’t cheap, but neither are sharpeners. If you’re not going through bits constantly, it may be useful to purchase an inexpensive, drill-powered sharpener to put an edge on your bits. You’ll find that they do a decent job, and if you’re not drilling precision holes, they’ll grind a useful edge.

But it’s definitely worth spending the time and doing your homework because there’s nothing more frustrating than not having the correct size or type of drill bit to hand when you need it, or to find the bits disintegrating right in the middle of a delicate job.

The Drill Doctor 750X will sharpen drill bits as small as 3/32 inch and up to ¾ inch, making it versatile for any drill bit a DIYer is likely to use. It also comes with a diamond wheel, so grinding fresh edges on carbide bits is not a problem.

This small but mighty model offers side-by-side sharpening and is made with a dual-speed motor, ½-inch chuck, a 20-degree knife sharpening guide and hone, and a 118-degree drill bit sharpening port. For added convenience, this Drill Doctor also comes with a replacement abrasive disc and a user manual.

Wood drill bits are usually the easiest to spot in your set because they often have a very sharp pointed tip on the end – a brad point – which allows the bit to grip the wood, without moving around, to start the hole. They have a sharp double-bladed thread which allows the drill to work its way through the wood quickly.

The Work Sharp knife and tool sharpener can bail you out in a pinch. While not specifically a drill bit sharpener, this model can put a quick edge on a drill bit and get you back to work in a hurry. It features five belts of various coarse levels, allowing users to put a serviceable edge on a high-speed steel or cobalt drill bit.

You’ve usually only got one chance when drilling into glass or tiles – with the time cost and monetary expense of replacing breakages, precision matters. Many glass and tile drill bits just look like regular twist drill bits, but this trio from Wickes are spade, or spear, shaped. While spear-tipped bits are generally more prone to breakage than twist bits, that can often be preferable to breaking a tile.

Cobalt drill bits are much harder at higher temperatures making them good for drilling through stainless steel and other hard materials, though they are usually way in excess of what most DIYers need.

Sharpening drill bits is all about saving money, and the Drill Doctor DD350X will do that time and time again. This low-priced drill bit sharpener allows users to put fresh 118-degree grinds on old, dull drill bits. It can handle any drill bit size between 3/32 inch and ½ inch, and it comes with a diamond wheel to help users get the most out of their sharpener.

Sharp bits drill faster and more accurately. When the tip of a drill bit becomes dull, it won’t dig in exactly where you’d like it and will also drill crooked or elongated holes. A sharp bit will bore straight down and create a perfectly round hole in almost any material. Having your own drill bit sharpener will allow you to keep your bits in top condition.

When you think of a drill bit, most likely, a standard twist bit will spring to mind. These are suited to drilling metal or plastic. They have a sharp tip and the twisted grooves along the length to allow material to be drawn out of the hole to help keep the bit straight.

The odd breakage aside, the Bosch 50-piece X-Line set could be the only box of drill bits you will ever need. It covers the majority of common sizes you would need for drilling wood, metal, and masonry, plus it includes screwdriver bits (and an extension bar), a countersink bit, three sockets, two spade bits, and a gauge to check the size of the bits. It even comes with a snap-off knife.

The result is a completely custom drill bit that’s both incredibly accurate and fast cutting. It can handle drill bits as small as ⅛ inch and as large as ⅞ inch, providing an excellent range to work within. Use this jig with any type of drill bit, but use a diamond grinding wheel for carbide bits.

If you wish that you knew about drill bit sharpeners a long time ago, you’re not alone. Many have wasted money on new bits when the old ones become dull. Now that you do know a bit about the best drill bit sharpeners, you might have some more questions. Below are the most frequently asked questions and answers about drill bit sharpeners. If you don’t find your answer here, contact the sharpener’s manufacturer.

Those who are experienced and comfortable using bench grinders should feel right at home with this model from Wen. Built for versatility and effectiveness, this drill bit sharpener has a 5-amp variable-speed motor that operates between 2,000 and 3,450 revolutions per minute for sharpening virtually any drill bit size.