Hundreds of British manufacturing companies opened their doors in a UK-wide open house today as part of National Manufacturing Day, giving their local communities the chance to see the highly paid careers and jobs on offer in our exciting and diverse sector.

Saginaw, MI-based Fullerton Tool Company — which manufacturers precsion-made solid carbide cutting tools — announced Wednesday that it has acquired Carbro Corporation.

Founded in 1942, Fullerton Tool is a third-generation, family-owned company that is ISO 90001:2015 certified. It has two production facilities — one on the Saginaw's south side, and one about 9 miles west of there. The company's products include end mills, drills, reamers, routers, keyseat cutters, saws, burrs, countersinks and boring tools.

The challenges of milling ISO P materials are well documented. In the first instance, complex toolpaths or difficult to machine materials can cause edge line chipping that leads to poor surface finish and tool failure.

Several customer test sites are already demonstrating the potential gains on offer to discerning production engineers responsible for machine shops where investment and continuous improvement are priorities in a fiercely competitive marketplace.

Thanks to intrinsic properties such as compressive residual stresses, and high hot hardness, PVD grades are a good choice when it comes to milling operations that demand toughness or sharp cutting edges to help overcome sticky materials.

Coalville, Leicestershire-based CMS Cepcor is a leading supplier of aftermarket crusher spares, manganese-steel wear liners and other equipment for the mining, aggregate production and associated industries worldwide.

In a customer example involving slot milling, a subcontractor’s productivity was limited by its standard grade end mill cutter. However, when switching to a CoroMill 390 with size 07 inserts and the GC1130 grade, the increased productivity afforded by a 33% increase in cutting speed from 150 to 200m/minute, and a 50% gain in table feed from 600 to 900mm/minute. Ensured time in cut was reduced from 5.5 to 3.8 minutes and tool life was considerably improved. Moreover, the result was achieved at a 3mm depth of cut, compared with 2mm for the competitor tool.

A South West-based engineering team is aiming to transform the large-format additive manufacturing sector with the launch of its latest product.

Image

Milling steel in the ISO P materials classification is not without its challenges. Tricky tool paths and thermal fluctuations, in combination with tough or ‘sticky’ materials, means that production engineers have faced a long battle to optimise steel milling operations.

Production engineers are tasked with continually searching for solutions that help deliver improved performance from milling insert grades. The arrival of GC1130, the first Sandvik Coromant milling grade manufactured using Zertivo technology, signals an opportunity for machine shops to take large strides towards greater process control, productivity and profitability. The result is the ability to compete more effectively for new contracts and build a more robust and successful business.

To amplify the important potential advantages of using PVD grades, Sandvik Coromant has devised a new production technology called Zertivo, which takes the whole insert into consideration, not just the coating.

When developing Zertivo, Sandvik Coromant focused on creating a platform that would make it possible to offer the perfect balance between various properties to match the requirements of the market. Here, the team deduced that developing a new grade is about optimizing the interplay of several properties, and this is where the company has attained new levels of success with Zertivo.

One of the secrets behind the premium performance of GC1130 is its high chromium (Cr) content fine-grained substrate. The inherent characteristics of chromium additions in the cemented carbide help withstand edge-line chipping and cracks arising from difficult machining environments such as temperature and/or load variations, as well as vibrations.

Indeed, milling some of the more ‘tacky’ materials in the ISO P classification can cause flaking of the insert coating, which in turn leads to breakage of the edge line. Furthermore, thermal fluctuations during machining, especially under wet conditions, can cause crack formation, an undesirable effect that tends to induce unpredictable tool life and even sudden breakage. For these reasons, correct insert grade selection is paramount to process security, productivity and profitability.

Ideal for square shoulder end milling cutters, GC1130 is first introduced on the CoroMill 390 with inserts in sizes 07 and 11, although further extensions are planned to follow shortly. In fact, GC1130 will also soon be available in most CoroMill variants. CoroMill 390 is a versatile concept for machining varied component features and materials; the assortment includes many different types of tools and a wide selection of corner radii.

The advantages of PVD tooling grades are well documented – particularly with tough materials, but there’s always room for improvement. In this article, PES discovers how Sandvik Coromant, through its new Zertivo technology, is taking PVD to the next level. Milling steel in the ISO P materials classification is not without its challenges. Tricky tool paths and thermal fluctuations, in combination with tough or ‘sticky’ materials, means that production engineers have faced a long battle to optimise steel milling operations. In recent years, PVD (physical vapour deposition) grades have proven a popular choice, but even these can be compromised (depending on application) in terms of crack formation and/or edge line chipping. As a result, Sandvik Coromant has set about reinventing PVD grade technology from the ground up, creating GC1130, a purpose-designed steel milling grade that is the first to take advantage of Zertivo, a new method of production that results in benefits such as longer tool life and enhanced security. GC1130 insert size 07 The challenges of milling ISO P materials are well documented. In the first instance, complex toolpaths or difficult to machine materials can cause edge line chipping that leads to poor surface finish and tool failure. Indeed, milling some of the more ‘tacky’ materials in the ISO P classification can cause flaking of the insert coating, which in turn leads to breakage of the edge line. Furthermore, thermal fluctuations during machining, especially under wet conditions, can cause crack formation, an undesirable effect that tends to induce unpredictable tool life and even sudden breakage. For these reasons, correct insert grade selection is paramount to process security, productivity and profitability. Thanks to intrinsic properties such as compressive residual stresses, and high hot hardness, PVD grades are a good choice when it comes to milling operations that demand toughness or sharp cutting edges to help overcome sticky materials. Enhanced ISO P milling GC1130, the first milling PVD grade produced with Zertivo technology, is optimised for steel milling in all conditions. When developing this advanced new grade, the focus was on solving the issues of chipping, insert flaking and thermal cracks, working with both substrate and coating, to reach longer tool life and secure machining, even in unstable or demanding conditions. One of the secrets behind the premium performance of GC1130 is its high chromium (Cr) content fine-grained substrate. The inherent characteristics of chromium additions in the cemented carbide help withstand edge-line chipping and cracks arising from difficult machining environments such as temperature and/or load variations, as well as vibrations. To amplify the important potential advantages of using PVD grades, Sandvik Coromant has devised a new production technology called Zertivo, which takes the whole insert into consideration, not just the coating. Creating a high quality PVD coating includes many complex process steps; the main ones being pumping, heating, etching, coating and cooling. Besides coating composition, process parameters such as temperature, gas flow and pressure are crucial for final tool performance. After all, variations in the production processes have direct impact on the grade and, ultimately, how the tool performs on the machine. The Zertivo production technology is designed to take PVD process control to a new level, resulting in improved adhesion between the substrate and the coating, along with optimised cutting edge integrity. Ultimately, the concept behind Zertivo is to ensure that each grade is produced under the right conditions, resulting in a higher quality product for secure machining. The right balance When developing Zertivo, Sandvik Coromant focused on creating a platform that would make it possible to offer the perfect balance between various properties to match the requirements of the market. Here, the team deduced that developing a new grade is about optimizing the interplay of several properties, and this is where the company has attained new levels of success with Zertivo. In effect, the R&D team at Sandvik Coromant has discovered the art of creating the ideal PVD grades, where carefully combined ingredients for both the coating and substrate are merged with precisely controlled process conditions to produce inserts with unbeatable edge line security. With GC1130, the resistance against chipping has been greatly improved through the introduction of extra predictability and security into the production process. The clean, intact edge of GC1130 promotes high metal removal rates and elevated performance in both wet and dry machining. Furthermore, it is suitable for both roughing and finishing applications. Ideal for square shoulder end milling cutters, GC1130 is first introduced on the CoroMill 390 with inserts in sizes 07 and 11, although further extensions are planned to follow shortly. In fact, GC1130 will also soon be available in most CoroMill variants. CoroMill 390 is a versatile concept for machining varied component features and materials; the assortment includes many different types of tools and a wide selection of corner radii. CoroMill 390 with insert size 07 Several customer test sites are already demonstrating the potential gains on offer to discerning production engineers responsible for machine shops where investment and continuous improvement are priorities in a fiercely competitive marketplace. In a customer example involving slot milling, a subcontractor’s productivity was limited by its standard grade end mill cutter. However, when switching to a CoroMill 390 with size 07 inserts and the GC1130 grade, the increased productivity afforded by a 33% increase in cutting speed from 150 to 200m/minute, and a 50% gain in table feed from 600 to 900mm/minute. Ensured time in cut was reduced from 5.5 to 3.8 minutes and tool life was considerably improved. Moreover, the result was achieved at a 3mm depth of cut, compared with 2mm for the competitor tool. The future of PVD, today Production engineers are tasked with continually searching for solutions that help deliver improved performance from milling insert grades. The arrival of GC1130, the first Sandvik Coromant milling grade manufactured using Zertivo technology, signals an opportunity for machine shops to take large strides towards greater process control, productivity and profitability. The result is the ability to compete more effectively for new contracts and build a more robust and successful business. Sandvik Coromant www.sandvik.coromant.com/uk

With GC1130, the resistance against chipping has been greatly improved through the introduction of extra predictability and security into the production process. The clean, intact edge of GC1130 promotes high metal removal rates and elevated performance in both wet and dry machining. Furthermore, it is suitable for both roughing and finishing applications.

Creating a high quality PVD coating includes many complex process steps; the main ones being pumping, heating, etching, coating and cooling. Besides coating composition, process parameters such as temperature, gas flow and pressure are crucial for final tool performance. After all, variations in the production processes have direct impact on the grade and, ultimately, how the tool performs on the machine.

Based in Lawndale, CA, Carbro is a fellow supplier of solid carbide rotary tools. Going forward, it will operate under the Carbro name. It will continue to operate as its own entity and partner with Fullerton to create strategic partnerships to better serve the Aerospace market. Fullerton said the acquisition and partnership will allow Carbro to continue to provide its existing products and services while exploring new opportunities to better service new and existing customers.

If you find this article informative, consider subscribing digitally to PES Media for free. Keep up to date with the latest industry news in your inbox as well as being the first to receive our magazine in digital form.

Carbro Corporation, located just southeast of LAX Airport, has been producing cutting tools for more than 50 years. It's current product lineup includes solid carbide routers, drills, reamers and threaded shank tooling.

The advantages of PVD tooling grades are well documented – particularly with tough materials, but there’s always room for improvement. In this article, PES discovers how Sandvik Coromant, through its new Zertivo technology, is taking PVD to the next level.

Image

In recent years, PVD (physical vapour deposition) grades have proven a popular choice, but even these can be compromised (depending on application) in terms of crack formation and/or edge line chipping. As a result, Sandvik Coromant has set about reinventing PVD grade technology from the ground up, creating GC1130, a purpose-designed steel milling grade that is the first to take advantage of Zertivo, a new method of production that results in benefits such as longer tool life and enhanced security.

"It is with both pleasure and excitement to announce the acquisition of Carbro," Fullerton president and co-owner Patrick Curry said. "Carbro and Fullerton will continue to build upon their existing product lines and reputations and together will create strategic partnerships to better service specialty markets as well as our customers. I am excited for the future with both of these companies and how this partnership will impact the manufacturing industry."

Image

GC1130, the first milling PVD grade produced with Zertivo technology, is optimised for steel milling in all conditions. When developing this advanced new grade, the focus was on solving the issues of chipping, insert flaking and thermal cracks, working with both substrate and coating, to reach longer tool life and secure machining, even in unstable or demanding conditions.

In effect, the R&D team at Sandvik Coromant has discovered the art of creating the ideal PVD grades, where carefully combined ingredients for both the coating and substrate are merged with precisely controlled process conditions to produce inserts with unbeatable edge line security.

The Zertivo production technology is designed to take PVD process control to a new level, resulting in improved adhesion between the substrate and the coating, along with optimised cutting edge integrity. Ultimately, the concept behind Zertivo is to ensure that each grade is produced under the right conditions, resulting in a higher quality product for secure machining.