Tile drill bits need to have a strong carbide tip to penetrate the hard surface and prevent cracking or chipping. They can often be used to drill into glass too, but make sure to check this before you buy. Tile drill bits are often more expensive than non-specialist bits as they feature a more durable tungsten carbide tip.

If you are looking to create bigger holes for cabling or pipes you will need a specialist drill bit called a hole saw. Be sure to check the description carefully to see which materials the hole cutter can tackle.

HSS bits are designed to withstand the heat generated from drilling into metal, although it’s still a good idea to use drilling fluid to maintain the drill bit’s longevity.

Top Tip: Hold the wall plug next to the drill bit and mark it using some tape so you know how deep to drill into the wall.

After determining the material you will be drilling into you'll need to work out what size hole you need to make. Making sure to identify the right size drill bit will prevent any slippage when driving the bit or screw. You should look to use a drill bit that is slightly smaller than the screw you intend to use, for example if you are using a 4.5mm screw then use a 4mm drill bit. You can use this quick video guide to picking the right drill bit size if you are not sure on the size of your screw.

One of the main considerations when it comes to selecting the right drill bit is knowing what surface material you are drilling into. You can buy multi-purpose drill bits that can handle a variety of substances, however the quality will diminish more quickly than those designed to tackle specific tasks such as drilling into bricks. Here we look at what drill bit is right for different material types.

With Summer bowing out and Autumn on it's way, your gardening jobs are ready to change again to adapt to the upcoming cooler weather. Here are some gardening jobs you can get on with in September.

Whenever working at a height, you're going to need some sort of access equipment, but should you choose a podium or a scaffold tower? In this guide, we will discuss whether a podium tower or scaffold tower is best for your job and what equipment we have to hire at HSS.

Image

When the inevitable British wet weather arrives and wreaks havoc on our gardens, our precious plants and flowers are going to need saving. Read more to find out how you can keep your garden protected in wet weather and keep it looking its best.

If you are looking to anchor a wall plug they are colour coded so you can use this as a general guide to work out what size bit you will need:

You’ve finally got round to that DIY project you have been planning. You may already have your safety goggles on and a drill in your hand, but now you are questioning, “what drill bit do I need?”.

SDS, or slotted drive system, drill bits are specifically designed for SDS drills as they can be held securely in place during the hammer action. They are for heavy duty drilling so ideal for masonry.

Image

Whether you’re fitting hinges in a door frame or putting furniture together you’ll ideally used a wood drill bit. An auger bit has a corkscrew design that easily penetrates through wood leaving a neat finish on the edges of the hole

You’ll need to use a HSS drill bit with a cone shaped tip to drill into metal whether its aluminium, copper or brass. A cobalt drill bit will be needed for drilling through tough stainless steel.

These cutters are a centre / bottom cutting cutter and best suited to cutting general steels, steel alloys, titanium, stainless steels, aluminium and non ferrous / non metallic materials.

A regular multi-surface or wood drill bit will work well on plasterboard. You shouldn’t use a masonry or metal drill bit as they are too powerful and will damage the plaster.

Every DIYer needs essential power tools to see them through their home improvement projects. Here at HSS, we can help you put together the perfect toolbox so you'll have all the power tools you need.

If a neat and tidy finish is important you may want to use a countersink drill bit that leaves the flat-head screw sitting flush with the wood.

Image

Top Tip: when working on tiles place a piece of tape over where you plan to drill to stop the drill bit tip from slipping when you start drilling.

Cat is a member of the E-commerce team and is passionate about all things product, from power tools and TVs to cushions and curtains. She enjoys tackling basic DIY tasks at home and has taken on jobs such as stripping wallpaper, painting rooms, and upcycling furniture.

While you may have heard of a masonry drill bit, countersink drill bit, metal drill bit, HSS drill bit, SDS drill bit, you may not know what they all are and what are they intended for. Our drill bits guide will talk through different types of drill bits and how to select the right one for the job, whether it's putting up a shelf on the living room wall or hanging a mirror on bathroom tiles.

HSS ProService Limited © 2023. All rights reserved. Registered Company No. 11084154. Registered office:Building 2, Think Park, Mosley Road, Trafford Park, Manchester, M17 1FQ

A drill bit that can tackle a material such as brick, stone or concrete needs to be tough. It also needs to be the right shape to prevent cracks and splits as you drill. A masonry drill bit is perfect for this, and is usually made from High Speed Steel, or HSS, with an incredibly tough carbide tip to allow it to penetrate with ease.

Before you reach for the wrong one, it’s important to understand that the incorrect drill bit can be problematic. Not only can it lead to a job taking longer than necessary, but can also leave you with damaged materials, damaged tools, and it can be a safety hazard.