First-time power drill user? Still recommends buying a cordless model, not a corded one. "There's really no reason to use a plug-in drill," she tells us. "Technically, it gives you little more power, but a good rechargeable cordless drill will perform just as well." And you're free to use it anywhere, without lugging around an extension cord. If you're planning to use your drill for long stretches at a time, you can easily keep an extra battery pack on hand to switch out.

There are five bits in the set, which come in two lengths – both of which are longer than is common at these diameters – and are stored in a plastic case. The tips are tungsten carbide, while the drill bit is made from hardened steel and features U-shaped flutes that are designed to efficiently sweep out debris from the drill hole.

Below you’ll find a selection of the best drill bits available, covering SDS Plus, hex and round twist-drill options. Our picks take into consideration price, online review ratings, and the selection of bits offered in a set to ensure you’re able to choose the best masonry drill bit for you.

Chuck: This is where you insert the drill bit. To open or close the chuck, hold the hand grip and press the trigger switch.

Gear switch: Changes drill speed. Typically, a lower gear is used for driving light screws, and a higher gear for drilling holes or driving bigger screws.

The majority of masonry drill bits are made from tungsten carbide, a tungsten-carbon compound that resists abrasion well, and can withstand the high temperatures generated from drilling brick or concrete. Diamond-tipped bits are also available, but are usually way in excess of what a DIYer will need, both in terms of cost and specifications – although they’re the preferred choice for core drill bits.

Hex drill bits are a little more unusual. The hexagonal shaft will lock into a drill more firmly, and will resist twisting in the chuck. That ensures minimal torque is lost between the drill and the drill bit. However, SDS (slotted drive shaft) bits offer all the benefits of hex, but are designed for hammer drills. A deep slot in the SDS drill bit’s shaft locks in the hammer drill’s chuck for a secure fit that won’t loosen. SDS Plus has a 10mm shank, while SDS Max measures 18mm.

If you’re drilling through two courses of brick or a single course of blockwork, you’ll need a drill that will be long enough to avoid going through the hassle of having to drill through the reverse side. You’ll need to factor in the width of the bricks or blocks, the mortar, internal plaster and any external wall coverings such as render, plus the size of any cavities, too.

Erbauer’s diamond-tipped core drill set is mighty in more ways than one. For that sizable price tag, you get three core drills in key sizes, all stored in a high-quality flight case. As well as the 38, 52 and 117mm core drills, it features a 200mm extension bar for deeper drilling, 115mm SDS adapter, 90mm hex adapter, an 8 x 205mm pilot drill, and a 75mm drift key to help remove the pilot bit from the pilot hole.

Suitable for wet and dry cutting through a variety of materials, the larger core drill bit is ideal for soil pipe and boiler flues, and the smaller pairing for 32mm pipe and 42mm waste pipes. This is a high-quality set that’s well-suited to any kind of major plumbing or electrical jobs.

To help us provide you with free impartial advice, we may earn a commission if you buy through links on our site. Learn more

Hex drill sets suitable for masonry aren’t as common as those with a round shaft or SDS fitment, which probably goes some way to explain the popularity of this EZARC set. That, and the super-positive reviews it’s received from thousands of users.

The bits themselves feature a tungsten carbide tip and a fully hardened shaft, making them suitable for drilling concrete, tiles and even granite. The four-spline SDS Plus configuration means that the bits will fit securely into your hammer drill. Importantly, all products from UK Drills are manufactured to British ISO and DIN standards.

Still's favorite drills are made by DeWalt (which also happens to be the brand we use in the HB workroom). "They're easy to use a last a long time," she says.

Every item on this page was hand-picked by a House Beautiful editor. We may earn commission on some of the items you choose to buy.

Torque control: Adjust to change the torque, aka drilling power. There's generally also a drill setting specifically for drilling holes—don't use this for driving screws though, as you might end up stripping the head!

A selection of commonly used sizes from a well-known brand and with an appealingly low price tag, there’s very little to quibble about when it comes to these DeWalt masonry drill bits. They’re designed to power through concrete, masonry, brick and both natural and artificial stone, featuring a rounded shaft that will fit the widest range of drills.

Image

Your drill should come with a rechargeable battery, a plug-in charger, and, of course, the drill itself. A kit with a handful of basic drill bits (for making holes) and driver bits (for screwing and unscrewing screws) should be fine for household tasks.

Regular masonry drills are available in diameters up to 25 or 30mm, but if you need to make a larger diameter hole – to run plumbing pipes through walls, for example – then you’ll need a masonry core drill bit. These large, hollow, cylinder-shaped bits have diamond-tipped teeth that effectively cut a circle in your masonry. Once you’ve drilled through, you’ll be left with the waste material inside the core bit. The beauty of core bits is that you’re left with a perfect hole, ensuring a snug fit.

Proving that a good set of SDS Plus drill bits needn’t cost the earth is this set from Wigan-based UK Drills. The SDS Plus set includes seven bits in five diameters and two lengths, presented in a robust metal case – which should shrug off damage better than the brittle plastic alternatives.

Image

Fortunately, masonry drill bits that can tackle these types of jobs do exist, such as this 260mm-long drill bit from DeWalt. Featuring a two-cutter carbide head with individual cutting tips at 140 degrees for more efficient drilling, this lengthy drill bit has a hardened steel body to reduce the likelihood of breakage. Reviewers were impressed by the quality on offer here, especially for the price.

Image

When it comes to drill bits, all things aren’t equal. Made from a variety of materials and designed to drill through different surfaces, masonry drill bits need to be among the toughest of the bunch.

Emma Bazilian is a writer and editor covering interior design, market trends and culture. She has very strong feelings about tissue box covers and believes that everything is better with toile.

Often thicker, studier and longer than other types of drill bits, masonry drill bits have a slightly wider tip to help clear the path for the rest of the bit. In general, they’re best paired with a hammer drill, although depending on the surface you’re drilling into, and the size of the hole you wish to make, you might be able to get away with using a powerful standard drill. Note that, in our opinion, you’d be wise to spend extra on a drill bit from a known brand, since cheaper units can be prone to failure when the going gets tough.

Reverse switch: Changes the direction of drilling. (Regular = clockwise, reverse = counter-clockwise.) When the switch is in the middle position, or safety, the drill will not turn at all.

Short answer: no. The most common kind of drill bits have a round shaft, and are suitable for the most popular drills; the kind of multipurpose drill that you’re already likely to have. They’re perfectly suitable for light to moderate work, and should be up to the job of drilling through most masonry.

A power drill might seem like one of those tools that only a serious DIY-er needs, but we're here to tell you it's something that literally every homeowner (or renter!) should have on hand. Even the most basic power drill can make a huge difference in everyday home tasks, from hanging a mirror (an anchor is your most secure option every time) to assembling furniture (so much faster). We asked contractor Meredith Still, the owner and founder of NYC-based design-build firm The Meredith Project, to walk us through the what's what of a power drill and how to safely use one.

Arriving in a touch plastic box that opens up as a stand, selecting and returning the drill bits into the casing is easy. The bits themselves are heat-treated to minimise the risk of breakage. Amazon reviewers awarded excellent scores for durability, sturdiness and longevity – which is exactly what you want from your masonry drill bits.