Those shopping for a bench grinder attachment that will help take expensive drill bits from dull to unbelievably sharp will want to check out the Tormek DBS-22. This drill bit sharpener allows users to adjust the angle from 90 degrees to 150 degrees and features an adjustable split angle.

In some cases, it may be necessary to use a hand lens to count the rings. This 10-inch-diameter white pine had 52 annual rings. By comparing the number of growth rings of cut stumps of white pine trees in this same stand to the DBH corings, we know it took about five years for these trees to reach DBH. Therefore, we can conclude that the total age of this tree is approximately 57 years old.

We narrowed our research to include drill bit sharpeners that have only a select number of angles to drill at or a range of adjustable angles—though the extra adjustments can make it tricky to operate as well. Each selection on our list has online videos that can be used to help users learn how to properly use the sharpener. Finally, we included recommendations that had a number of different price points and levels of professional quality for both hobbyists and professionals.

Image

Image

For folks who already have a bench grinder, the General Tools 825 drill grinding attachment is an affordable way to take care of a pile of dull drill bits. This jig bolts to the worktop and uses the side of a grinding wheel to create sharp edges on old drill bits.

Increment borers are available from forestry supply stores. This tool comprises three parts: auger, handle, and extractor (sometimes referred to as the spoon). Be sure to purchase one that is long enough to reach the center of the tree that you want to investigate. Here are the steps to using it:

Finding a drill bit sharpener that works with your drill bits of choice is important. For most homeowners, a standard drill bit sharpener will accommodate most of the bits in your workshop. These bits usually consist of steel or cobalt, and standard grinding wheels will sharpen them with ease.

The sharpener comes with a diamond grinding wheel to handle high-speed steel, cobalt, or carbide bits with ease. It can also “split” the end of the drill bit, producing a more accurately drilled hole. It can sharpen drill bits between 3/32 inch and ½ inch to handle most drill bits in a standard set.

Whether you choose an electric benchtop sharpener or a grinder attachment, there’s a solution for your dull drill bits. Your drill bits will last much longer if you choose the best drill bit sharpener for your needs from this guide. Each of the top picks below was selected after an in-depth review of the market and thorough product vetting.

If you wish that you knew about drill bit sharpeners a long time ago, you’re not alone. Many have wasted money on new bits when the old ones become dull. Now that you do know a bit about the best drill bit sharpeners, you might have some more questions. Below are the most frequently asked questions and answers about drill bit sharpeners. If you don’t find your answer here, contact the sharpener’s manufacturer.

Step 3: For accuracy, it is essential that you reach the center of the tree. If you’re not sure that you’ve reached that point, hold the extractor on the side of the tree to help you measure (the auger and extractor are the same length).

To ensure a respectful dialogue, please refrain from posting content that is unlawful, harassing, discriminatory, libelous, obscene, or inflammatory. Northern Woodlands assumes no responsibility or liability arising from forum postings and reserves the right to edit all postings. Thanks for joining the discussion.

The sharpener will work for bits between ⅛ inch and ¾ inch and is adjustable for many different drill point angles. It has several adjustments, one of which adjusts the height of the drill bit. This adjustment allows users to creep up on the perfect angle slowly for maximum accuracy. To create a perfectly centered point, simply roll the bit over between every pass.

Image

If ease of operation is important, you should consider purchasing an electric benchtop model. These are the most foolproof of the drill sharpener designs, and they will allow you to put a sharp edge on a drill bit in no time at all.

If you’re continually working in your home shop or on a job site, having your own drill bit sharpener can save you quite a bit of money. Instead of throwing your old bits out, you can grind a new edge on the spot, or place them to the side and spend an hour grinding a whole set until they’re like new.

If you’re looking for a foolproof drill bit sharpener, the DD500X from Drill Doctor is as close as possible. This drill bit sharpener has two angle presets of 118 and 135 degrees. These presets allow users to choose the right angle for their drill bit type without worrying if they’re off a degree or two.

If you’re looking for an electric benchtop drill sharpener that allows you to get the most out of your old drill bits, the Drill Doctor 750X is worth a look. Users can adjust the 750X for any angle between 115 and 140 degrees, which means this sharpener can handle almost any angle. It will also create an edge on the end of the bit called a “split” bit, which creates a sharp point to drill accurate holes.

Step 2: The standard sampling height is diameter at breast height (DBH), or 4½ feet above the ground. Square yourself directly in front of the tree so that the tip of the auger is aimed at the middle of the tree’s trunk and the auger is parallel to the ground. If the tree has thick bark, it’s generally easier to start in a bark furrow (crevice). Push hard and screw the borer into the tree, turning its handles in a clockwise direction.

Drill bits aren’t cheap, but they do seem to dull quickly. Whether you’re drilling through dense hardwood or hardened steel, some drill bits seem to lose their edge within minutes of coming out of the package.

Sharp bits drill faster and more accurately. When the tip of a drill bit becomes dull, it won’t dig in exactly where you’d like it and will also drill crooked or elongated holes. A sharp bit will bore straight down and create a perfectly round hole in almost any material. Having your own drill bit sharpener will allow you to keep your bits in top condition.

These recommendations have a range of capabilities to sharpen drill bits of varying sizes. Some drill bit sharpeners can accommodate bits as small as ³⁄₃₂ of an inch or as large as 1½ inches. Since users have unique needs, this list includes sharpeners that offer a solution for almost every commonly used drill bit.

Drill bit sharpeners can make using drill bits safer. If you’re drilling with a dull bit, you’ll have to use more force to make any progress. A smaller bit can easily snap under pressure, which sometimes sends pieces of drill bit flying. While you should always wear safety glasses, flying bits of metal are never safe. A sharpener will help ensure that you don’t need to put much power behind the bit.

Step 4: At this point you’re ready to insert the extractor into the auger. Orient the auger handles horizontally and push the extractor into the auger slowly and carefully; the extractor is thin and it can break easily if you apply too much pressure. Once the extractor is all the way in, reverse the borer one complete revolution in order to cut off the front end of the core from the tree’s center.

Instead of throwing dull drill bits in the trash, you can restore their cutting edge with the best drill bit sharpener. These tools can help put a sharp point on an older drill bit, grinding the tip at the perfect angle. The result is a fast-drilling, clean-cutting drill bit that works as well, if not better, than new.

We’re committed to testing and reviewing products so you can make an informed decision. Advertising does not influence our product reviews and it never will. We always focus our coverage on standout products and never hesitate to mention their flaws and quirks. By using our affiliate links, you’re supporting our work and helping us continue to provide expert analysis. Find out more about our product evaluation process.

Since it doesn’t create split points, Drill Doctor made it more compact so it can sit on a shelf without getting in the way. There are no angle adjustments, which makes this a great tool for those looking for a simple, straightforward drill bit sharpener.

Sharpening drill bits is all about saving money, and the Drill Doctor DD350X will do that time and time again. This low-priced drill bit sharpener allows users to put fresh 118-degree grinds on old, dull drill bits. It can handle any drill bit size between 3/32 inch and ½ inch, and it comes with a diamond wheel to help users get the most out of their sharpener.

DIYers and professionals who need a portable drill bit sharpener will want to take a good look at the Drill Doctor X2 sharpener. This versatile and compact model weighs just 3 pounds and is small enough to fit inside a tool box or case. Made with an electric plug-in design, this Drill Doctor can be used anywhere it is needed and can sharpen drill bits, tools, knives, scissors, and more.

Step 1: The extractor and auger are nested inside the handle; unscrew the extractor and put it in a safe place (not shoved into the ground and not where you’ll step on it). A bit of ribbon tied to the end will help you keep track of it. Insert the auger in the center of the handle and close the handle latch.

The Work Sharp knife and tool sharpener can bail you out in a pinch. While not specifically a drill bit sharpener, this model can put a quick edge on a drill bit and get you back to work in a hurry. It features five belts of various coarse levels, allowing users to put a serviceable edge on a high-speed steel or cobalt drill bit.

Drill bits aren’t cheap, but neither are sharpeners. If you’re not going through bits constantly, it may be useful to purchase an inexpensive, drill-powered sharpener to put an edge on your bits. You’ll find that they do a decent job, and if you’re not drilling precision holes, they’ll grind a useful edge.

Each sharpener is different, but you, or the jig, hold the bit at a specific angle relative to a grinding wheel. The grinding wheel removes metal from the tip of the drill bit until the edge is sharp.

While you can sharpen every drill bit to one consistent angle, certain styles of bits work best at specific angles. It’s better to have a sharpener that you can adjust to the drill bit. Standard angles are between 118 and 135 degrees, so look for a sharpener that allows you to switch between the two for the best versatility.

You can, but they’ll never be quite as effective again. Titanium bits have a coating that the grinding wheel will remove when sharpening. That’s not to say the bits are no good; they just won’t have the hard coating that makes them so useful.

If you purchase high-end carbide drill bits, then a standard grinding wheel won’t work. Carbide is extremely hard and requires a diamond wheel to sharpen correctly. If you keep carbide bits on hand, look for a sharpener that comes with diamond wheels. Or, purchase a bench grinder jig that you can set up with a diamond grinder wheel.

All bits are worth sharpening if you already have a sharpener. However, it’s not worth buying a sharpener to put an edge on a 1/8-inch steel drill bit.

Let’s get to the point: There are some things you need to know when shopping for the best drill bit sharpener. Not all models have the same capabilities or uses, so you need to be sure the one you choose will get the job done. Here are some factors worth considering.

One of the most common questions that foresters get is, “How old is this tree?” Often, the response is less than satisfactory, as the forester carries on about site characteristics, species-specific silvics, land-use history, succession, and competition. This mini-forestry lesson, if nothing else, highlights the important point that tree age and size are not always positively correlated. For my students, this lesson comes in the form of counting annual growth rings from cross-sections of both big and small trees from different forests, and then plotting them on a graph. When the students get to an aspen cross-section that’s 16 inches in diameter and only 45 years old, followed by a mountainside eastern red cedar that’s only 2 inches in diameter and more than 200 years old, they really understand the variability.

Though users may not be able to replicate the exact angle by hand, they’ll come close enough to drill effectively on larger drill bits. It will also handle all knife and scissor sharpening needs, as well as chisels and other cutting tools, though carbide bits are probably too much for this tool. It weighs just 53.6 ounces and is comparatively small, making it perfect for professionals and DIYers to transport.

Tom Scalisi is a freelance writer, author, and blogger with a passion for building. Whether it’s a DIY project or an entire website, Tom loves creating something from the ground up, stepping back, and admiring a job well done.

Articles may contain affiliate links which enable us to share in the revenue of any purchases made. Registration on or use of this site constitutes acceptance of our Terms of Service.

Purchasing a drill bit sharpener that can handle all of the bits you commonly use should be a priority. While almost all sharpeners can handle small to mid-range bits, only certain models can handle the big stuff. Bits over 1/2-inch are expensive, so make sure that your sharpener can handle them.

As for user-friendliness, this Wen also has a built-in work light, a quenching tray, dual eye guards, a large and easy-to-read on/off switch, an 80-grit wheel, and a 36-grit wheel, making it safe and ideal for drill bit sharpening as well as cleaning and deburring. Though this model has a steep price tag and isn’t the most portable option at 41 pounds, it offers durability and effectiveness for long-term use.

There are two popular power sources for sharpening your drill bits; plug-in electric and drill-powered (which may be electric or battery).

Brett R. McLeod is a professor of forestry and natural resources at Paul Smith’s College and the author of American Axe: Celebrating the Tool That Shaped a Continent (Storey Publishing, 2020).

You will also want to look for a sharpener that can handle your smaller bits. While these bits are rarely expensive (depending on the material), they dull quickly and lose their performance right away. Instead, keeping one of the best drill bit sharpeners on hand will allow you to put a quick edge on a bit as small as 3/32-inch.

Various types of drill bits use differently-angled cutting edges at their points. Bits reserved for wood have aggressive cutting edges to allow them to get through the material quickly. Bits for metal have flatter angles, allowing them to take off smaller bits at a time without overheating or chipping the bit.

There’s a lot that goes into shopping for one of these tools, but all the machines on our list below are worth considering. They’re easy to use, accurate, and can keep you from having to throw out the best (and occasionally expensive) drill bits in your collection.

However, there is a technique to determine tree age, short of cutting through the trunk and counting rings. Instead we’ll use an increment borer to extract a pencil-size sample, which will allow us to count the growth rings and to note major events in the tree’s history such as drought, fire, competition, and release from competition. Coring a tree is classified as “nondestructive sampling,” but does create a wound that serves as a potential entry point for insects and disease. To reduce the risk of disease transmission, disinfect the auger and extractor between each coring.

If you already own a bench grinder, an attachment may be the best route to go. They’re far less expensive than a benchtop model, and you can achieve the same angles. They take a little longer to set up, but you won’t sacrifice any quality once you do.

This small but mighty model offers side-by-side sharpening and is made with a dual-speed motor, ½-inch chuck, a 20-degree knife sharpening guide and hone, and a 118-degree drill bit sharpening port. For added convenience, this Drill Doctor also comes with a replacement abrasive disc and a user manual.

The Drill Doctor 750X will sharpen drill bits as small as 3/32 inch and up to ¾ inch, making it versatile for any drill bit a DIYer is likely to use. It also comes with a diamond wheel, so grinding fresh edges on carbide bits is not a problem.

The result is a completely custom drill bit that’s both incredibly accurate and fast cutting. It can handle drill bits as small as ⅛ inch and as large as ⅞ inch, providing an excellent range to work within. Use this jig with any type of drill bit, but use a diamond grinding wheel for carbide bits.

Those who are experienced and comfortable using bench grinders should feel right at home with this model from Wen. Built for versatility and effectiveness, this drill bit sharpener has a 5-amp variable-speed motor that operates between 2,000 and 3,450 revolutions per minute for sharpening virtually any drill bit size.