{"Diameter - Metric (D)":["4.5","6","7.5","9.5","10","12","16","20"],"Number of Flutes":["4","5","6"],"Major Diameter - Metric":["6","8","10","12","14","16","20","24"],"Overall Length - Metric (L)":["60","65","70","85","95","105","120"],"Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Neck Length - Metric (L1)":["15","26","28"],"Pitch":["1","1.25","1.5","1.75","2","2.5","3"],"Length of Cut - Metric (Lc)":["13","17","17.5","21","22.5","26.3","30","34.5","34","42","42.5","50","51"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Type":["1","2"],"Helix Angle - Degree":"11","Web Literature 1":"8002024CA-TP,39|8002024CA-TPT,34","Web Literature 4":"800390CA","Substrate":"Carbide","Surface Treatment":"EXO","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Good","Thread Type":["M","MF"],"Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Thread Size - Metric":["M6","M8","M10","M12","M14","M16","M20","M24"],"Units":"Metric","Product Overview":"Metric, MJ, Helical Flute, EXO","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","Alloy Steels : 4140; 4340":"P; Best","High Carbon Steel : 1065":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Low Carbon Steel : 1010; 1018":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","List Name":"WXO-ST-PNC","Coolant Thru":"Yes","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Diameter-Sizes":"4.5mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"15mm - 28mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 120mm","Shank-Sizes":"6mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041150/Taps_-_Tap_-_EXOCARB_Oil_-_List_41150_-_Thread_Mills_-_Catalog"],"Friendly Name":"41150"}

2022717 — In general its not a great idea, but it'll work in a pinch. The aluminum will stick to the endmill over time even with coolant running on it.

Straight Flute Drills. INCH ANSI MG carbide uncoated bright 1-1 1-6 140 Inquiry Download

G6 tolerance chartshaftchart

Carbon fiber-reinforced plastic (CFRP). Carbon fiber reinforced ... Our forms use Google reCAPTCHA to better distinguish a human from a robot program.

{"Number of Flutes":"4","Major Diameter - Metric":["3","4","5","6","8","10","12"],"Neck Diameter - Metric (d1)":["1.82","2.3","3.1","3.48","4.81","5.84","7.07"],"Overall Length - Metric (L)":["50","70","80"],"Shank Diameter - Metric (d)":["6","10"],"Pitch":["0.5","0.7","0.8","1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["7.25","9.75","12","14.5","19.13","23.75","28.38"],"Diameter - Metric (D)":["2.4","3.1","4","4.6","6.2","7.5","9"],"Length of Cut - Metric (Lc)":["1.5","2.1","2.4","3","3.75","4.5","5.25"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Angle - Degree":"0","Web Literature 1":"8002024CA-TP,30|8002024CA-TPT,32","Web Literature 2":"800319CA-V4","Web Literature 4":"800390CA","Web Literature 3":"800392CA","Brand":"A Brand","Feature 4":"Added roughing teeth","Short Description":"Advanced Performance End-Cutting Thread Mill for High-Hardness Steel","List Name":"AT-2","Substrate":"Carbide","Product Overview":"Carbide, Durorey Coating, End-Cutting Edge, Metric Sizes, Left-Hand Cut","Benefit 2":"Controls tool deflection","Surface Treatment":"DUROREY","Benefit 3":"Enables climb milling to prolong tool life","Benefit 1":"enables superior heat resistance and high toughness optimized for high-hardness steel milling!","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Shank Tolerance":"h6","Web Video 1":"https://youtu.be/3w5ya1QxN9M","Web Video 2":"https://youtu.be/3w5ya1QxN9M","Web Video 3":"https://youtu.be/3w5ya1QxN9M","Cast Iron":"K; Best","Feature 3":"Left-hand cut configuration","Cutting Direction":"LH","Thread Type":"M","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Thread Size - Metric":["M3","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Feature 1":"Newly developed DUROREY coating","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","High Carbon Steel : 1065":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Low Carbon Steel : 1010; 1018":"P; Good","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Feature 2":"Special cutting edge shape","Full Description":"The OSG A Brand AT-2 Thread mills with end-cutting edge for high hardness steels is ideal for highly difficult high hardness steel applications. The risk of sudden tool breakage can be minimized by breaking chips into small and manageable pieces and evacuating them smoothly. Since no pilot hole is required, process integration and the risk of breakage can be avoided.","Product Category":"Thread Mills","Benefit 4":"to distribute the load","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Coolant Thru":"Yes","Diameter-Sizes":"2.4mm - 9mm","Flute-Sizes":"-","Neck-Sizes":"7.25mm - 28.38mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 80mm","Shank-Sizes":"6mm - 10mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16640_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16640_-_Extra_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16640_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16640_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16640_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/OSG_-_Website_-_Product_Overview_-_AT-2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/OSG_-_Website_-_Product_Overview_-_AT-2_-_3"],"Friendly Name":"16640"}

{"Overall Length - Inch (L)":["3","3.5","5","5.5","6"],"Number of Flutes":["4","5","6"],"Major Diameter - Inch":["0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1"],"Threads Per Inch":["20","28","32","18","24","16","14","13","12","11","10","9","8"],"Neck Length - Inch (L1)":["0.7","0.68","0.625","0.889","0.833","0.75","1","0.958","0.875","1.308","1.2","1.178","1.5","1.389","1.333","1.636","1.458","1.9","1.75","1.7","2.222","2.071","1.95","2.5","2.334","2.2"],"Diameter - Inch (D)":["0.179","0.224","0.264","0.303","0.343","0.382","0.421","0.461","0.539","0.736"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.6","0.607086","0.562598","0.777559","0.749606","0.687795","0.875196","0.812598","1.071259","1","0.964173","1.153937","1.1","1.107086","1.333464","1.277559","1.249606","1.45433","1.388976","1.374409","1.7","1.62559","1.6","2","1.928346","1.85","2.25","2.166929","2.1"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Type":["1","2"],"Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1"],"Helix Angle - Degree":"11","Web Literature 1":"8002024CA-TP,25|8002024CA-TPT,31","Web Literature 3":"800384CA|80064CA|80062CA","Web Literature 4":"800390CA","Web Literature 2":"80061CA-V2","Brand":"A Brand","Short Description":"Advanced Performance One Pass Thread Mill","List Name":"AT-1","Substrate":"Carbide","Product Overview":"Carbide, EgiAs Coating, Inch Sizes","Surface Treatment":"EgiAs","Feature 3":"EgiAs Coating","Benefit 3":"For exceptional wear resistance","Benefit 4":"For high wear resistance and toughness","Notes":"For internal threads only","Benefit 1":"For reduced vibration","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Shank Tolerance":"h6","Web Video 1":"https://youtu.be/ladZnTkQl_E","Web Video 2":"https://youtu.be/ladZnTkQl_E","Web Video 3":"https://youtu.be/ladZnTkQl_E","Units":"Inch","Benefit 2":"Increases tool stability","Cast Iron":"K; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Alloy Steels : 4140; 4340":"P; Best","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Cutting Direction":"RH","Helix Direction":"RH","Feature 2":"Right-Hand Cut & Left-Hand Helix Geometry","Full Description":"The A Brand AT-1 threadmill is designed with a left-hand helix for a small pitch diameter difference between the hole entry and the bottom of the hole, allowing a delay in gauge-out failure. Longer tool life can be achieved with elimination of “zero cutting” for correcting bending.","Product Category":"Thread Mills","Feature 4":"Ultra-Fine Grain Carbide","Thread Type":["UNC","UNF","UNEF"],"Feature 1":"Unequal Spacing / Variable Lead Flute","Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Diameter-Sizes":"0.179\" - 0.736\"","Flute-Sizes":"-","Neck-Sizes":"0.625\" - 2.5\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 6\"","Shank-Sizes":"0.25\" - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016625/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16625_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016625/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16625_-_Type_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016625/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16625_-_Type_4"],"Friendly Name":"16625"}

{"Major Diameter - Inch":["0.112","0.138","0.164","0.19","0.25","0.3125","0.375","0.5"],"Number of Flutes":"2","Neck Length - Inch (L1)":["0.311","0.385","0.437","0.526","0.489","0.675","0.625","0.819","0.771","0.969","0.896","1.269","1.175"],"Threads Per Inch":["40","32","24","20","28","18","16","13"],"Diameter - Inch (D)":["0.083","0.1","0.122","0.146","0.179","0.224","0.264","0.362"],"Length of Cut - Inch (Lc)":["0.125","0.156","0.208","0.25","0.179","0.278","0.313","0.385"],"Shank Diameter - Inch (d)":["0.25","0.375"],"Overall Length - Inch (L)":["2","3","3.5"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Feature 4":"2-Flute","Helix Angle - Degree":"30","Web Literature 1":"8002024CA-TP,31|8002024CA-TPT,33","Web Literature 2":"800319CA-V4","Web Literature 4":"800390CA","Brand":"A Brand","Short Description":"Advanced Performance End-Cutting Thread Mill for Non-ferrous Materials","List Name":"AT-2 R-SPEC","Substrate":"Carbide","Product Overview":"Carbide, Durorey Coating, End-Cutting Edge, Inch Sizes","Surface Treatment":"DLC-IGUSS","Feature 1":"DLC-IGUSS Coating","Feature 2":"End Cutting Edge","Notes":"For internal threads only","Benefit 4":"for wide chip room","Shank Tolerance":"h6","Benefit 2":"Helical drilling and threading can be done simultaneously","Web Video 1":"https://youtu.be/lK5CSk-uXnQ","Web Video 2":"https://youtu.be/lK5CSk-uXnQ","Web Video 3":"https://youtu.be/lK5CSk-uXnQ","Units":"Inch","Cutting Direction":"LH","Helix Direction":"LH","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Size - Number":["No. 4","No. 6","No. 8","No. 10"],"Benefit 3":"Prevents deflection of tool","Benefit 1":"prevents welding on the cutting edge","Full Description":"The high-efficiency thread mill AT-2 R-SPEC is engineered to dramatically reduce machining time in non-ferrous metal applications such as aluminum alloy by its continuous helical cutting ability, which combines drilling and threading into a single process.","Product Category":"Thread Mills","Thread Type":["UNC","UNF"],"Feature 3":"Unique Cutting Edge Shape","Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Thread Size - Inch":["1/4","5/16","3/8","1/2"],"Coolant Thru":"Yes","Diameter-Sizes":"0.083\" - 0.362\"","Flute-Sizes":"-","Neck-Sizes":"0.311\" - 1.269\"","Taper-Sizes":"-","Overall-Sizes":"2\" - 3.5\"","Shank-Sizes":"0.25\" - 0.375\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016647/End_Mills_-_End_Mill_-_A_Brand_AT-2_List_16647_-_AT-2_R-SPEC_-_Catalog"],"Friendly Name":"16647"}

G6 tolerance chartpdf

Chucking reamers, which generally have a straight shank and are used for general purpose reaming, automobile reamers, which are used for heavy-duty ...

{"Number of Flutes":["3","4"],"Overall Length - Inch (L)":["3","4"],"Major Diameter - Inch":["0.0625","0.125","0.25","0.5","1","2.5"],"Threads Per Inch":["27","18","14","11.5","8"],"Neck Length - Inch (L1)":["0.44","1.04"],"Diameter - Inch (D)":["0.186","0.286","0.334","0.575","0.785","0.917"],"Length of Cut - Inch (Lc)":["0.409","0.61","0.787","0.957","1.358"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.625","1"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Thread Size - Inch":["1/16","1/8","1/4","1/2","1","2-1/2"],"Type":["3","4"],"Helix Angle - Degree":"30","Web Literature 1":"8002024CA-TP,40|8002024CA-TPT,34","Web Literature 4":"800390CA","Substrate":"Carbide","Surface Treatment":"EXO","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Units":"Inch","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Type":"NPT","Product Overview":"NPT, Helical Flute, EXO","Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","List Name":"OT-SFT-PNGT NPT","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","Diameter-Sizes":"0.186\" - 0.917\"","Flute-Sizes":"-","Neck-Sizes":"0.44\" - 1.04\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2042000/Taps_-_Thread_Mill_-_EXOCARB_Thread_Mill_-_List_42000_-_Type_4_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2042000/Taps_-_Thread_Mill_-_EXOCARB_Thread_Mill_-_List_42000_-_Type_3_-_Catalog"],"Friendly Name":"42000"}

{"Overall Length - Inch (L)":["3","3.5","4"],"Major Diameter - Inch":["0.0625","0.125","0.25","0.375","0.5","1"],"Number of Flutes":["4","5","6"],"Threads Per Inch":["27","18","14","11.5"],"Neck Length - Inch (L1)":["0.48","0.72"],"Diameter - Inch (D)":["0.223","0.302","0.381","0.461","0.617","0.737"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.407","0.611","0.786","0.957"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Thread Size - Inch":["1/16","1/8","1/4","3/8","1/2","1"],"Helix Angle - Degree":"11","Type":["3","4"],"Web Literature 1":"8002024CA-TP,27|8002024CA-TPT,31","Web Literature 3":"800384CA|80064CA|80062CA","Web Literature 4":"800390CA","Web Literature 2":"80061CA-V2","Brand":"A Brand","Short Description":"Advanced Performance One Pass Thread Mill","List Name":"AT-1 NPT","Substrate":"Carbide","Product Overview":"Carbide, EgiAs Coating, NPT","Surface Treatment":"EgiAs","Feature 3":"EgiAs Coating","Benefit 3":"For exceptional wear resistance","Benefit 4":"For high wear resistance and toughness","Notes":"For internal threads only","Benefit 1":"For reduced vibration","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Shank Tolerance":"h6","Web Video 1":"https://youtu.be/ladZnTkQl_E","Web Video 2":"https://youtu.be/ladZnTkQl_E","Web Video 3":"https://youtu.be/ladZnTkQl_E","Units":"Inch","Benefit 2":"Increases tool stability","Cast Iron":"K; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Type":"NPT","Alloy Steels : 4140; 4340":"P; Best","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Cutting Direction":"RH","Helix Direction":"RH","Feature 2":"Right-Hand Cut & Left-Hand Helix Geometry","Full Description":"The A Brand AT-1 threadmill is designed with a left-hand helix for a small pitch diameter difference between the hole entry and the bottom of the hole, allowing a delay in gauge-out failure. Longer tool life can be achieved with elimination of “zero cutting” for correcting bending.","Product Category":"Thread Mills","Feature 4":"Ultra-Fine Grain Carbide","Feature 1":"Unequal Spacing / Variable Lead Flute","Diameter-Sizes":"0.223\" - 0.737\"","Flute-Sizes":"-","Neck-Sizes":"0.48\" - 0.72\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016630/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16630_-_NPT_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016630/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16630_-_NPT_-_Type_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016630/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16630_-_NPT_-_Type_4"],"Friendly Name":"16630"}

H7Tolerance Chart

... cutting techniques that greatly reduce bowing and internal material stress, in even the most difficult to cut plastic materials. Our large, computer ...

{"Overall Length - Inch (L)":["3","3.5","3.75","4","4.5"],"Major Diameter - Inch":["0.0625","0.125","0.25","0.375","0.5","1"],"Number of Flutes":["4","5","6"],"Threads Per Inch":["27","18","14","11.5"],"Shank Diameter - Inch (d)":["0.25","0.313","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.593","0.889","1.143","1.391"],"Thread Length - Inch (Lc)":["0.593","0.889","1.143","1.391"],"Coolant Thru":"No","Brand":"A Brand","Cutting Direction":"RH","List Name":"AT-1 NPS","Meets 4H Class of Fit":"No","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Helix Direction":"RH","Meets 2B Class of Fit":"No","Thread Size - Inch":["1/16","1/8","1/4","3/8","1/2","1"],"Meets 3B Class of Fit":"No","Units":"Inch","Product Category":"Thread Mills","STI Thread":"No","Surface Treatment":"EgiAs","Thread Type":"NPS","Substrate":"Carbide","View Catalog Page":"Here","View Speed and Feed Page":"Here","Web Literature 2":"80061CA-V3","Alloy Steels : 4140; 4340":"P; Best","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 1":"for reduced vibration","Benefit 2":"increases tool stability","Benefit 3":"for exceptional wear resistance","Benefit 4":"for high wear resistance and toughness","Cast Iron":"K; Best","Diameter - Inch (D)":["0.223","0.302","0.381","0.459","0.617","0.737"],"Feature 1":"Unequal Spacing and Variable Lead Flute","Feature 2":"Right-Hand Cut and Left-Hand Helix Geometry","Feature 3":"EgiAs Coating","Feature 4":"Ultra-Fine Grain Carbide","Full Description":"The A Brand AT-1 threadmill is designed with a left-hand helix for a small pitch diameter difference between the hole entry and the bottom of the hole, allowing a delay in gauge-out failure. Longer tool life can be achieved with elimination of “zero cutting” for correcting bending.","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Helix Angle - Degree":"11","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Neck Length - Inch (L1)":["0.667","1"],"Product Overview":"AT-1, NPS","Shank Tolerance":"h6","Short Description":"Advanced Performance One Pass Thread Mill","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Good","Type":["2","1"],"Diameter-Sizes":"0.223\" - 0.737\"","Flute-Sizes":"-","Neck-Sizes":"0.667\" - 1\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 4.5\"","Shank-Sizes":"0.25\" - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016632/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16632_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016632/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16632_-_Angle"],"Friendly Name":"16632"}

h7/g6tolerance chart

{"Overall Length - Inch (L)":["3","4"],"Number of Flutes":["4","5","6"],"Major Diameter - Inch":["0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1"],"Threads Per Inch":["20","28","18","24","16","14","13","12","11","10","9","8"],"Neck Length - Inch (L1)":["0.448","0.429","0.783","0.751","1","0.944","1.09"],"Diameter - Inch (D)":["0.18","0.245","0.3","0.35","0.37","0.43","0.45","0.495","0.62","0.745"],"Length of Cut - Inch (Lc)":["0.401","0.393","0.5","0.562","0.582","0.712","0.7","0.767","0.75","0.917","0.889","1","0.944","1.2","1.125","1.33","1.358","1.625","1.582"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5","0.625","0.75"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Type":["1","2"],"Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1"],"Helix Angle - Degree":"11","Web Literature 1":"8002024CA-TP,38|8002024CA-TPT,34","Web Literature 4":"800390CA","Substrate":"Carbide","Surface Treatment":"EXO","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Units":"Inch","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Good","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","Alloy Steels : 4140; 4340":"P; Best","High Carbon Steel : 1065":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Low Carbon Steel : 1010; 1018":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","Thread Type":["UNC","UNF"],"Product Overview":"UNC, UNF, UNEF, UNS, Helical Flute, EXO, Coolant-Thru","List Name":"WXO-ST-PNC","Coolant Thru":"Yes","Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Diameter-Sizes":"0.18\" - 0.745\"","Flute-Sizes":"-","Neck-Sizes":"0.429\" - 1.09\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041050/Taps_-_Thread_Mill_-_EXOCARB_Thread_Mill_-_List_41050_-_Catalog_-_Type_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041050/Taps_-_Thread_Mill_-_EXOCARB_Thread_Mill_-_List_41050_-_Catalog_-_Type_2"],"Friendly Name":"41050"}

B. & R. MACHINE, INC. | 34 followers on LinkedIn.

ISOTolerance Chart

Angular size is a property of observing an object with a fixed diameter at different distances. The farther away the object is, the smaller it appears to be.

It should drop in easily. Next, rotate the slot to where you wish to cut the key. Liberally lube up the broach with your favorite cutting oil and and insert the ...

{"Number of Flutes":["3","4","5"],"Diameter - Metric (D)":["4.5","6","7.5","9.5","10","12","16","20"],"Major Diameter - Metric":["6","8","10","12","14","16","20","24"],"Overall Length - Metric (L)":["60","65","70","85","95","105","120"],"Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Neck Length - Metric (L1)":["15","26","28"],"Pitch":["1","1.25","1.5","1.75","2","2.5","3"],"Length of Cut - Metric (Lc)":["13","17","17.5","21","22.5","26.3","30","34.5","34","42","42.5","50","51","10","13.8","16","16.25","16.5","20","24","25.5","31.5"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Type":["1","2"],"Helix Angle - Degree":"11-30","Web Literature 1":"8002024CA-TP,37|8002024CA-TPT,34","Web Literature 2":"800257CA-V3","Web Literature 4":"800390CA","Substrate":"Carbide","Surface Treatment":"EXO","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Best","Thread Type":["M","MF"],"Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Thread Size - Metric":["M6","M8","M10","M12","M14","M16","M20","M24"],"Units":"Metric","Product Overview":"Metric, MJ, Helical Flute, EXO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","List Name":"OT-SFT-PNGT/WX-PNC","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Diameter-Sizes":"4.5mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"15mm - 28mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 120mm","Shank-Sizes":"6mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041100/Taps_-_Tap_-_EXOCARB_-_List_41100_-_Thread_Mills_-_Catalog"],"Friendly Name":"41100"}

G6 tolerance chartmetric

{"Number of Flutes":["3","4"],"Overall Length - Inch (L)":["3","4"],"Major Diameter - Inch":["0.0625","0.125","0.25","0.5","1","2.5","0.75","2"],"Threads Per Inch":["27","18","14","11.5","8"],"Neck Length - Inch (L1)":["0.44","1.04"],"Diameter - Inch (D)":["0.186","0.286","0.335","0.575","0.785","0.917"],"Length of Cut - Inch (Lc)":["0.409","0.61","0.787","0.957","1.358"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.625","1"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Thread Size - Inch":["1/16","1/8","1/4","1/2","1","2-1/2","3/4","2"],"Type":["3","4"],"Helix Angle - Degree":"30","Web Literature 1":"8002024CA-TP,41|8002024CA-TPT,34","Web Literature 4":"800390CA","Substrate":"Carbide","Surface Treatment":"EXO","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Units":"Inch","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Type":"NPTF","Product Overview":"NPTF, Helical Flute, EXO","Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","List Name":"OT-SFT-PNGT NPTF","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","Diameter-Sizes":"0.186\" - 0.917\"","Flute-Sizes":"-","Neck-Sizes":"0.44\" - 1.04\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2042001/Taps_-_Tap_-_EXOCARB_Pipe_-_List_42001_-_Thread_Mills_-_Catalog"],"Friendly Name":"42001"}

{"Diameter - Metric (D)":["4.5","5.7","7.7","9.7","10.7","13.7","11.7","15.7","19.7"],"Number of Flutes":["4","5","6"],"Major Diameter - Metric":["6","8","10","12","14","16","18","20","24"],"Overall Length - Metric (L)":["75","85","100","120","135","150"],"Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Pitch":["0.75","1","1.25","1.5","1.75","2","2.5","3"],"Neck Length - Metric (L1)":["16","34.5","39","50"],"Length of Cut - Metric (Lc)":["13.5","14","18","18.75","22","22.5","24","26","27.5","27","28","31.5","32","36","42.5","43.5","45","52","54"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Type":["1","2"],"Helix Angle - Degree":"11","Web Literature 1":"8002024CA-TP,26|8002024CA-TPT,31","Web Literature 3":"800384CA|80064CA|80062CA","Web Literature 4":"800390CA","Web Literature 2":"80061CA-V2","Brand":"A Brand","Short Description":"Advanced Performance One Pass Thread Mill","List Name":"AT-1","Substrate":"Carbide","Product Overview":"Carbide, EgiAs Coating, Metric Sizes","Surface Treatment":"EgiAs","Feature 3":"EgiAs Coating","Benefit 3":"For exceptional wear resistance","Benefit 4":"For high wear resistance and toughness","Notes":"For internal threads only","Benefit 1":"For reduced vibration","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Shank Tolerance":"h6","Web Video 1":"https://youtu.be/ladZnTkQl_E","Web Video 2":"https://youtu.be/ladZnTkQl_E","Web Video 3":"https://youtu.be/ladZnTkQl_E","Benefit 2":"Increases tool stability","Cast Iron":"K; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 400":"M; Good","Thread Size - Metric":["M6","M8","M10","M12","M14","M16","M18","M20","M24"],"Units":"Metric","Thread Type":["MF","M"],"Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Alloy Steels : 4140; 4340":"P; Best","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Cutting Direction":"RH","Helix Direction":"RH","Feature 2":"Right-Hand Cut & Left-Hand Helix Geometry","Full Description":"The A Brand AT-1 threadmill is designed with a left-hand helix for a small pitch diameter difference between the hole entry and the bottom of the hole, allowing a delay in gauge-out failure. Longer tool life can be achieved with elimination of “zero cutting” for correcting bending.","Product Category":"Thread Mills","Feature 4":"Ultra-Fine Grain Carbide","Feature 1":"Unequal Spacing / Variable Lead Flute","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Diameter-Sizes":"4.5mm - 19.7mm","Flute-Sizes":"-","Neck-Sizes":"16mm - 50mm","Taper-Sizes":"-","Overall-Sizes":"75mm - 150mm","Shank-Sizes":"6mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016620/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16620_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016620/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16620_-_Type_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016620/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16620_-_Type_4"],"Friendly Name":"16620"}

{"Number of Flutes":["3","4"],"Major Diameter - Inch":["0.19","0.216","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1"],"Threads Per Inch":["24","32","28","20","18","16","14","13","12","11","10","9","8"],"Neck Length - Inch (L1)":["0.437","0.374","0.358","0.449","0.429","0.783","0.752","1","0.945","1.091","0.406","0.598","0.571","1.142","1.098","1.417","1.445","1.547"],"Diameter - Inch (D)":["0.13","0.16","0.18","0.245","0.3","0.35","0.37","0.43","0.45","0.495","0.62","0.745","0.19","0.25","0.31","0.375"],"Shank Diameter - Inch (d)":["0.1875","0.25","0.3125","0.375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.374","0.331","0.323","0.402","0.394","0.5","0.594","0.583","0.713","0.701","0.768","0.75","0.917","0.89","1","0.945","1.201","1.126","1.335","1.358","1.626","1.583","0.469","0.563","0.752","0.551","0.535","0.72","0.874","1.071","1.051","1.079","1.098","1.39","1.453","1.5","1.701","1.689","2"],"Overall Length - Inch (L)":["2.5","3","4","4.5","5"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Type":["1","2"],"Helix Angle - Degree":"11-30","Web Literature 1":["8002024CA-TP,35|8002024CA-TPT,34","8002024CA-TP,36|8002024CA-TPT,34"],"Web Literature 4":"800390CA","Substrate":"Carbide","Surface Treatment":"EXO","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Units":"Inch","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Size - Number":["No. 10","No. 12"],"Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","List Name":"OT-SFT-PNGT","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","Thread Type":["UNC","UNF","UNEF","UNS"],"Product Overview":"UNC, UNF, UNEF, UNS, Helical Flute, EXO","Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1"],"Diameter-Sizes":"0.13\" - 0.745\"","Flute-Sizes":"-","Neck-Sizes":"0.358\" - 1.547\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 5\"","Shank-Sizes":"0.1875\" - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041000/Taps_-_Tap_-_EXOCARB_-_List_41000_-_Thread_Mills_-_Catalog"],"Friendly Name":"41000"}

{"Number of Flutes":"3","Major Diameter - Metric":["1","1.2","1.4","1.6","1.7","2","2.5","3","4","5"],"Overall Length - Metric (L)":["40","41"],"Shank Diameter - Metric (d)":["3","6"],"Pitch":["0.25","0.3","0.35","0.4","0.45","0.5","0.7","0.8"],"Neck Length - Metric (L1)":["2.75","3.25","3.8","4.35","4.85","4.4","5.6","6.5","8.7","10.8"],"Diameter - Metric (D)":["0.72","0.91","1.05","1.2","1.3","1.5","1.9","2.4","3.1","4"],"Length of Cut - Metric (Lc)":["0.26","0.31","0.36","1.2","1.35","1.5","2.1","2.4"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Angle - Degree":"11","Type":["5","6"],"Web Literature 1":"8002024CA-TP,34|8002024CA-TPT,35","Web Literature 2":"800257CA-V3|800291CA","Web Literature 4":"800390CA","Substrate":"Carbide","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For Internal threads only.","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Good","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Good","Thread Type":"M","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Thread Size - Metric":["M1","M1.2","M1.4","M1.6","M1.7","M2","M2.5","M3","M4","M5"],"Units":"Metric","Product Overview":"Metric, MJ, Helical Flute, EXO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Best","Titanium : 6AL4V (30HRC)":"S; Best","Surface Treatment":["Super Smooth","WXS"],"Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","List Name":"WH-VM-PNC","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Diameter-Sizes":"0.72mm - 4mm","Flute-Sizes":"-","Neck-Sizes":"2.75mm - 10.8mm","Taper-Sizes":"-","Overall-Sizes":"40mm - 41mm","Shank-Sizes":"3mm - 6mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041300/Taps_-_Tap_-_EXOCARB_Mini_-_List_41300_-_Thread_Mills_-_Type_6_-_Catalog"],"Friendly Name":"41300"}

{"Number of Flutes":"4","Major Diameter - Inch":["0.164","0.19","0.25","0.3125","0.375","0.5"],"Neck Diameter - Inch (d1)":["0.0866","0.0988","0.1236","0.139","0.1626","0.1776","0.1945","0.2169","0.2776","0.3067"],"Threads Per Inch":["32","24","20","28","18","16","13"],"Neck Length - Inch (L1)":["0.4059","0.4843","0.6252","0.5894","0.7642","0.7295","0.9063","0.8543","1.1921","1.1252"],"Diameter - Inch (D)":["0.122","0.146","0.179","0.224","0.264","0.362"],"Length of Cut - Inch (Lc)":["0.0938","0.125","0.15","0.1071","0.1667","0.1875","0.2308"],"Shank Diameter - Inch (d)":["0.25","0.375"],"Overall Length - Inch (L)":["2","3","3.5"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Angle - Degree":"0","Web Literature 1":"8002024CA-TP,29|8002024CA-TPT,32","Web Literature 2":"800319CA-V4","Web Literature 4":"800390CA","Web Literature 3":"800392CA","Brand":"A Brand","Feature 4":"Added roughing teeth","Short Description":"Advanced Performance End-Cutting Thread Mill for High-Hardness Steel","List Name":"AT-2","Substrate":"Carbide","Product Overview":"Carbide, Durorey Coating, End-Cutting Edge, Inch Sizes, Left-Hand Cut","Benefit 2":"Controls tool deflection","Surface Treatment":"DUROREY","Benefit 3":"Enables climb milling to prolong tool life","Benefit 1":"enables superior heat resistance and high toughness optimized for high-hardness steel milling!","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Shank Tolerance":"h6","Web Video 1":"https://youtu.be/3w5ya1QxN9M","Web Video 2":"https://youtu.be/3w5ya1QxN9M","Web Video 3":"https://youtu.be/3w5ya1QxN9M","Units":"Inch","Cast Iron":"K; Best","Feature 3":"Left-hand cut configuration","Cutting Direction":"LH","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Feature 1":"Newly developed DUROREY coating","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Size - Number":["No. 8","No. 10"],"Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","High Carbon Steel : 1065":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Low Carbon Steel : 1010; 1018":"P; Good","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Feature 2":"Special cutting edge shape","Full Description":"The OSG A Brand AT-2 Thread mills with end-cutting edge for high hardness steels is ideal for highly difficult high hardness steel applications. The risk of sudden tool breakage can be minimized by breaking chips into small and manageable pieces and evacuating them smoothly. Since no pilot hole is required, process integration and the risk of breakage can be avoided.","Product Category":"Thread Mills","Benefit 4":"to distribute the load","Thread Type":["UNC","UNF"],"Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Thread Size - Inch":["1/4","5/16","3/8","1/2"],"Coolant Thru":"Yes","Diameter-Sizes":"0.122\" - 0.362\"","Flute-Sizes":"-","Neck-Sizes":"0.4059\" - 1.1921\"","Taper-Sizes":"-","Overall-Sizes":"2\" - 3.5\"","Shank-Sizes":"0.25\" - 0.375\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16645_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/OSG_-_Website_-_Product_Overview_-_AT-2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16645_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/OSG_-_Website_-_Product_Overview_-_AT-2_-_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/OSG_-_Website_-_Product_Overview_-_AT-2_-_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16645_-_Action_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16645_-_Workpiece_4"],"Friendly Name":"16645"}

G6 Tolerancefor Shaft

G6 tolerance chartshaft

{"Number of Flutes":"2","Major Diameter - Metric":["3","4","5","6","8","10","12"],"Neck Diameter - Metric (d1)":["1.82","2.3","3.1","3.48","4.81","5.84","7.07"],"Overall Length - Metric (L)":["50","70","80"],"Shank Diameter - Metric (d)":["6","8","10"],"Pitch":["0.5","0.7","0.8","1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["7.75","10.45","12.8","15.5","20.38","25.25","30.13","9.25","12.45","15.3","18.5","24.38","30.25","36.13"],"Diameter - Metric (D)":["2.4","3.1","4","4.6","6.2","7.5","9"],"Length of Cut - Metric (Lc)":["1.5","2.1","2.4","3","3.75","4.5","5.25"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Feature 4":"2-Flute","Helix Angle - Degree":"30","Web Literature 1":"8002024CA-TP,32|8002024CA-TPT,33","Web Literature 2":"800319CA-V4","Web Literature 4":"800390CA","Brand":"A Brand","Short Description":"Advanced Performance End-Cutting Thread Mill for Non-ferrous Materials","List Name":"AT-2 R-SPEC","Substrate":"Carbide","Product Overview":"Carbide, Durorey Coating, End-Cutting Edge, Metric Sizes","Surface Treatment":"DLC-IGUSS","Feature 1":"DLC-IGUSS Coating","Feature 2":"End Cutting Edge","Notes":"For internal threads only","Benefit 4":"for wide chip room","Shank Tolerance":"h6","Benefit 2":"Helical drilling and threading can be done simultaneously","Web Video 1":"https://youtu.be/lK5CSk-uXnQ","Web Video 2":"https://youtu.be/lK5CSk-uXnQ","Web Video 3":"https://youtu.be/lK5CSk-uXnQ","Cutting Direction":"LH","Helix Direction":"LH","Thread Type":"M","Thread Size - Metric":["M3","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Benefit 3":"Prevents deflection of tool","Benefit 1":"prevents welding on the cutting edge","Full Description":"The high-efficiency thread mill AT-2 R-SPEC is engineered to dramatically reduce machining time in non-ferrous metal applications such as aluminum alloy by its continuous helical cutting ability, which combines drilling and threading into a single process.","Product Category":"Thread Mills","Feature 3":"Unique Cutting Edge Shape","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Coolant Thru":"Yes","Diameter-Sizes":"2.4mm - 9mm","Flute-Sizes":"-","Neck-Sizes":"7.75mm - 36.13mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 80mm","Shank-Sizes":"6mm - 10mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016642/End_Mills_-_End_Mill_-_A_Brand_AT-2_List_16642_-_AT-2_R-SPEC_-_Catalog"],"Friendly Name":"16642"}

Linden Capital Partners devotes world-class resources to exceptional, developing middle-market healthcare and life science companies.

{"Overall Length - Inch (L)":["3","3.5","4"],"Major Diameter - Inch":["0.0625","0.125","0.25","0.375","0.5","1"],"Number of Flutes":["4","5","6"],"Threads Per Inch":["27","18","14","11.5"],"Neck Length - Inch (L1)":["0.48","0.72"],"Diameter - Inch (D)":["0.223","0.302","0.381","0.459","0.617","0.737"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.407","0.611","0.786","0.957"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Thread Size - Inch":["1/16","1/8","1/4","3/8","1/2","1"],"Helix Angle - Degree":"11","Type":["3","4"],"Web Literature 1":"8002024CA-TP,28|8002024CA-TPT,31","Web Literature 3":"800384CA|80064CA|80062CA","Web Literature 4":"800390CA","Web Literature 2":"80061CA-V2","Brand":"A Brand","Short Description":"Advanced Performance One Pass Thread Mill","List Name":"AT-1 NPTF","Substrate":"Carbide","Product Overview":"Carbide, EgiAs Coating, NPTF","Surface Treatment":"EgiAs","Feature 3":"EgiAs Coating","Benefit 3":"For exceptional wear resistance","Benefit 4":"For high wear resistance and toughness","Notes":"For internal threads only","Benefit 1":"For reduced vibration","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Shank Tolerance":"h6","Web Video 1":"https://youtu.be/ladZnTkQl_E","Web Video 2":"https://youtu.be/ladZnTkQl_E","Web Video 3":"https://youtu.be/ladZnTkQl_E","Units":"Inch","Benefit 2":"Increases tool stability","Cast Iron":"K; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Type":"NPTF","Alloy Steels : 4140; 4340":"P; Best","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Cutting Direction":"RH","Helix Direction":"RH","Feature 2":"Right-Hand Cut & Left-Hand Helix Geometry","Full Description":"The A Brand AT-1 threadmill is designed with a left-hand helix for a small pitch diameter difference between the hole entry and the bottom of the hole, allowing a delay in gauge-out failure. Longer tool life can be achieved with elimination of “zero cutting” for correcting bending.","Product Category":"Thread Mills","Feature 4":"Ultra-Fine Grain Carbide","Feature 1":"Unequal Spacing / Variable Lead Flute","Diameter-Sizes":"0.223\" - 0.737\"","Flute-Sizes":"-","Neck-Sizes":"0.48\" - 0.72\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016631/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16631_-_NPTF_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016631/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16631_-_NPTF_-_Type_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016631/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16631_-_NPTF_-_Type_4"],"Friendly Name":"16631"}

Experience precision, efficiency, and innovation with our smart CNC router machine lines. Custom your Panel Furniture Smart Production Solutions at HUAHUA ...

{"Number of Flutes":"3","Major Diameter - Inch":["0.06","0.073","0.086","0.099","0.112","0.125","0.138","0.164"],"Neck Length - Inch (L1)":["0.162","0.196","0.198","0.189","0.22","0.248","0.272","0.307","0.354"],"Diameter - Inch (D)":["0.045","0.055","0.064","0.074","0.083","0.096","0.103","0.129"],"Threads Per Inch":["80","72","64","56","48","40","44","32","36"],"Shank Diameter - Inch (d)":["0.125","0.25"],"Length of Cut - Inch (Lc)":["0.013","0.014","0.016","0.054","0.047","0.063","0.075","0.068","0.094","0.083"],"Overall Length - Inch (L)":["1.625","1.661"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Angle - Degree":"11","Type":["5","6"],"Web Literature 1":"8002024CA-TP,33|8002024CA-TPT,35","Web Literature 2":"800257CA-V3","Web Literature 4":"800390CA","Substrate":"Carbide","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For Internal threads only.","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Good","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Units":"Inch","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Good","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Size - Number":["No. 0","No. 1","No. 2","No. 3","No. 4","No. 5","No. 6","No. 8"],"Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Best","Titanium : 6AL4V (30HRC)":"S; Best","Surface Treatment":["Super Smooth","WXS"],"Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","Product Overview":"UNC, UNF, UNEF, UNS, Helical Flute, EXO","Thread Type":["UNF","UNC"],"List Name":"WH-VM-PNC","Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Diameter-Sizes":"0.045\" - 0.129\"","Flute-Sizes":"-","Neck-Sizes":"0.162\" - 0.354\"","Taper-Sizes":"-","Overall-Sizes":"1.625\" - 1.661\"","Shank-Sizes":"0.125\" - 0.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041200/Taps_-_Tap_-_EXOCARB_Mini_-_List_41200_-_Thread_Mills_-_Type_6_-_Catalog"],"Friendly Name":"41200"}