MTECZ-NPT Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes, for Internal or External NPT Thread Profile

MTECD-ISO Small Diameter Short Left-Hand Cut. Solid Carbide Endmills for Internal ISO Profile Drilling, Threading and Chamfering.

MTECZ-Whitworth Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes, for Internal or External Whitworth Thread

MTECK-ISO Solid Carbide Internal Threading Endmill Step Release, Lead x2 With Coolant Hole, Used for ISO Thread Profile.

MTECM-ISO Solid Carbide Internal Threading Endmill Step Release, Lead x3 With Coolant Holes, Used for ISO Thread Profile.

Image

MTECK-UN Solid Carbide Internal Threading Endmill Step Release, Lead x2 With Coolant Hole, Used for UN Thread Profiles.

3-D Precision Machine employs 12 employees. The 3-D Precision Machine management team includes Carolyn Green (Purchasing Coordinator), and Roy Luoma (VP Engineering).

Image

MTECQ-UN Solid Carbide Endmills with Internal Coolant Holes and a Reduced Diameter Neck, for Deep Internal UN Profile Threading

MTECBF-W Solid Carbide Internal or External Threading Endmills with a Coolant Hole. Intended for BSF/BSP Thread Profiles.

Image

MTECM-UN Solid Carbide Internal Threading Endmill Step Release, Lead x3 With Coolant Hole, Used for UN Thread Profiles.