Join 100,000+ CNC'ers!  Get our latest blog posts delivered straight to your email inbox once a week for free. Plus, we’ll give you access to some great CNC reference materials including:

Image

Image

3/8carbideend millspeeds and feeds

According to Drill Doctor, some years ago most twist drill bits were 118 degree but now the 135 degree split point drill bits are the most commonly used angle.  They say this was mostly a marketing ploy.

Image

The disadvantage of a 135 degree point angle is that the bit is more prone to walking around.  This is the flip side of more gradual even contact of the cutting edge.  You’re more likely to need a spot drill or at least to center punch the hole.  Grinding a split point can help to minimize this walking behavior.  Using a more rigid setup such as a drill press can also help.

The gentler cut of the 135 degree point is because the flatter angle means the cutting edges come into contact with the hold more evenly and gradually than a 118 degree point.

Bob is responsible for the development and implementation of the popular G-Wizard CNC Software.  Bob is also the founder of CNCCookbook, the largest CNC-related blog on the Internet.

End Mill

HARVI IV 8-Flute End Mills are the latest addition to Kennametal’s HARVI family of high-performance and versatile end mills. With a unique design that offers higher metal removal rates and feed rates than 7-flute end mills and more versatility than traditional 9-flute end mills, HARVI IV 8-Flute End Mills keep customers cutting in difficult-to-machine materials. Rough and finish with one reliable tool in high-temp alloys, stainless steel, steels and hardened materials while achieving powerful chip clearance from internal coolant channels. Level up with 8 flutes and get unfamiliar with downtime.

If you are drilling deep holes, you will find parabolic flutes are extremely helpful.  See our article on deep hole drilling for many more tips.

The incredibly versatile HARVI IV 8-Flute End Mills are complemented by our new stainless steel, titanium and high-temp alloy solid end milling grade KCSM15A. This new grade features an innovative coating technology that’s delivering extended tool life for users and the best wear resistance in Kennametal’s history of solid carbide end milling.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

3/8 end millfor aluminum

If you have a choice of which style to use, you should take advantage of that choice.  Our G-Wizard Calculator tells you the best drill point angle to use based on the material to be drilled.

The choice of which angle to use is largely based on the material being drilled.  The 118 degree point angle is more aggressive and is preferred for soft materials like wood on up to aluminum.  However, the 135 degree angle will give a gentler cut which is better suited to harder materials.  Using a 118 degree point angle in a hard material will result in excessive tool wear of your drill bits.

A split point drill bit has two additional edges ground into the chisel edge, which make the entire point of the drill one long cutting edge. This reduces the amount of pressure needed to make the drill cut. This style is also self centering which means the drill starts cutting without the need of a pilot hole.