Iscar adds IS25 and IS35 SiAlON ceramic inserts for machining

He added that the most commonly used operations on miniature parts include ID and OD grooving of seals, ID and OD threads, relief grooves for mating components and broaching of keyways, hexes, squares and Torx features.

Big Daishowa also has a single insert type that can be offset and lowered through a hole and recentered to generate features, a centered tool for small front chamfering, and a universal tool that can change angles from 5° to 85° depending on the application.

Also, indexables are beneficial for cubic boron nitride (CBN) and polycrystalline diamond (PCD)-tipped inserts, where it’s possible to eliminate integral brazed-type tools.

2-D or 3-D path generated by program code or a CAM system and followed by tool when machining a part.

Small grooving operations also present chip-form and chip-flow challenges, according to Larry Myers, vice president of operations for Denitool Inc., Murfreesboro, Tenn. “It is desirable to compress the width of the chip to insure that it does not lodge in the groove being produced, which can stop chip flow and cause catastrophic failure,” he said.

OD grooving is easiest to generate by side turning or plunging, starting at around 0.020 " wide, according to Iscar’s Kelling. For this application, Iscar recommends its PENTACUT insert with five cutting edges and a molded chipformer.

The Micro-Mini tool line is offered in widths of 1mm and 2mm with radii down to 0.05mm. Shank sizes vary depending on the round shank holders on the machine they are used for. Standard groove widths for Mitsubishi’s indexable GTAT grooving insert line are 0.3mm to 3.0mm (0.012 " to 0.118 ").

One of the key decisions in grooving miniature parts is whether to use indexable or single-point inserts or solid-carbide tools. Duane Drape of HORN USA Inc. has some specific guidelines for shops to consider.

According to King of Thinbit, solid-carbide tools are typically preferred in most ID grooving applications under 0.500 ". While these tools are more expensive, they are stronger. “With inserts, you must reduce the strength of the toolholder to have a clamping mechanism for the insert and a place to mount the insert,” said King. This is not required for small solid-carbide grooving tools.

“Applications for the C-Cutter Mini are pretty universal, mostly chamfering and face milling with extreme efficiency and accuracy,” Hasto said. “Back chamfering with the single insert style is easy by reaching through a tapped hole and chamfer the bore or counterbore the hole from the back of the workpiece.”

“The standard R-Cutter milling cutters use the inserts, which provide a sharp cutting edge to eliminate burrs along the part edges, providing superior surface finish of the workpiece,” Hasto said. “This tool creates radial chamfers on the workpiece for back and front applications. The Speed finisher cutters are designed for high-volume applications allowing for four cutting edges on insert. This means ultra-fine finished with an insert that can be indexed four times before a replacement is needed, saving large amounts of time and money versus a non-indexable tool.

Big Daishowa’s chamfering tools are offered in several different types to optimize performance for a given application. Small cutters with multiple inserts allow profile chamfering with optimal feed rates. Other cutters feature large chamfering inserts that permit inner diameter chamfering over a wide range of bore diameters.

CoroTurn YT Y-axis turning is a method for simultaneous three-axis turning with interpolation of the milling spindle axis. The new tools can also be used in “static mode” with a locked spindle for flexible two-axis turning with fast insert indexing. The method is suitable for all materials and requires a multitasking machine with options to allow interpolation of the milling spindle axis during turning. All operations are performed with one tool, including roughing, finishing, longitudinal turning, facing, and profiling.

Another issue to consider is price. Solid-carbide tools typically have a higher unit price, but Drape argues that shops should consider the total application cost for grooving a miniature part before making a decision.

Machining operation in which metal or other material is removed by applying power to a rotating cutter. In vertical milling, the cutting tool is mounted vertically on the spindle. In horizontal milling, the cutting tool is mounted horizontally, either directly on the spindle or on an arbor. Horizontal milling is further broken down into conventional milling, where the cutter rotates opposite the direction of feed, or “up” into the workpiece; and climb milling, where the cutter rotates in the direction of feed, or “down” into the workpiece. Milling operations include plane or surface milling, endmilling, facemilling, angle milling, form milling and profiling.

Main body of a tool; the portion of a drill or similar end-held tool that fits into a collet, chuck or similar mounting device.

“One of the biggest changes we’ve seen is in the minimum bore sizes [the bore size that a grooving tool can fit into],” said Duane Drape, national sales manager, HORN USA Inc., Franklin, Tenn. “Four years ago, our minimum bore for grooving was 4mm. Now we have off-the-shelf 2mm minimum-bore grooving tools, and some customers are requesting off-the-shelf tools for grooving down to 1mm. Our smallest standard minimum-diameter tools are 0.2mm, but they are for boring, not grooving. We are constantly getting calls to reduce diameters even further.”

When used in lathe or screw-machine operations, this process separates a completed part from chuck-held or collet-fed stock by means of a very narrow, flat-end cutting, or parting, tool.

The Y-axis turning development follows Sandvik Coromant’s success with its innovative PrimeTurning, non-linear turning and interpolation turning for which two indexable inserts were developed: the CoroTurn Prime A-type tool with three 35° corners designed for light roughing, finishing, and profiling; and the CoroTurn Prime B-type tool with double-sided negative inserts with four cutting edges for finishing and roughing.

One way to reduce setup and machining time when grooving miniature parts is to use multifunction tools, such as one that performs slotting, endmilling, OD grooving and thread milling. One such tool is the Iscar Multi-Master. “There are applications where we can use one tool to do multiple operations, mainly on an OD or face groove,” said Andy Kelling of Iscar Metals Inc. “If you’re end slotting, you can also groove if you orient the tool a different way, pick the part off on a Swiss-style machine and machine with an auxiliary spindle. The goal is to minimize the number of tools used in setup.” He noted that the Multi-Master can groove full radiuses and create flat-bottom grooves, notch grooves and other intricate grooves.

Using an indexable insert for grooving is limited by bore diameter. In most cases, the smallest bore diameter for these types of tools is 0.708 ", according to Drape. There may be indexable tools for smaller bores but the radial DOC achievable with such tools is typically less than 0.040 ".

Small parts require even smaller grooves. That simple idea is driving one of the ongoing trends in grooving—the need to design and apply tools that can cut a variety of grooves in a growing number of miniature parts. The challenge is to design tiny tools and develop cutting strategies that resist tool breakage and manage chip generation in tight spaces.

“Small parts usually have tight tolerances, so machine accuracy is important,” said Thinbit’s King. Small parts also rotate at a high rpm. The formula is (sfm × 12)/(π × diameter). That means a ½ "-dia. part has to rotate at twice the speed as a 1 " part.

Special application methods recommended by Iscar use face forming and trepanning inserts to produce intricate forms containing grooves on the ends of some parts. Also, a multifunction tool that performs slotting and grooving has been used in several applications, according to Kelling. “When applications are reviewed, the focus is on using the fewest cutting tools,” said Kelling. “This decreases the required number of cutting tools, tool stations and tool change times, which reduces tooling costs along with machining cycle time.”

Operation in which the cutter is mounted on the machine’s spindle rather than on an arbor. Commonly associated with facing operations on a milling machine.

Indexable inserts, however, must be selected with careful attention to size, shape, geometry, and grade for the type of workpiece material and application, coatings, and nose radius for good chip control. Here’s how products from leading suppliers are designed to meet customer requirements for optimum metal removal with indexable cutting tools.

Sandvik Coromant has introduced a new method called CoroTurn Y-axis turning for machining complicated shapes and pockets with a single tool with benefits that include reduced cycle time, improved component surface, and more stable machining. At the heart of the new turning method are two indexable cutting tools: the new CoroTurn Prime variant is suitable for shafts, flanges, and components with undercuts; while the CoroPlex YT twin-tool, featuring CoroTurn TR profiling inserts and CoroTurn 107 round inserts with rail interface, can be used for components with pockets and cavities.

While many shops purchase off-the-shelf grooving tools for miniature part applications, larger manufacturers that use high volumes of these tools may purchase blanks and grind their own tools. “We offer our Micro-Mini solid-carbide grooving tools that can be made into specials,” said Chris Wills, product specialist, Mitsubishi Materials USA Corp., Schaumburg, Ill. “Our customers do the finishing work themselves. Higher-end users will have a high-precision grinder, or they will send it to a supplier and have them custom made,” he said.

Higher productivity—Indexable inserts offer strengthened edge geometry for durability and higher chip load capability.

“We don’t go below 0.300 " in diameter with an insertable grooving tool,” he said. “There are insertable tools on the market below 0.300 ", but consider that an insert tool requires a pocket, so now you have a piece of carbide to be held down by a setscrew, and that piece of carbide has to have a certain amount of thickness to it. Once you machine that pocket, you have a very weak area in the front of the tool where the insert seats. You can’t necessarily apply the proper geometries to that insert. So, will tools like that work on a specific miniature application? Absolutely. But there could be a quality issue.”

“Our BF (back spot facer) generally is used for workpieces that need back boring for counterbore generation without the operator taking time to flip a workpiece or fixture. The BF cutter is capable of offsetting to reach through the hole, recentering, and generating a counter bore before offsetting again to exit the bore. The BF-Cutter was exclusively designed for the back spot facing of capped bolt holes, sizes M6-M30, or 1/4"-1 1/8" (6.35-28.6 mm), and is ideal for all steels (including stainless), cast iron, and aluminum. The latest insert grades allow for in-depth selection based on material and conditions for the best surface finishes and run times,” Hasto said.

Advances in indexable cutter design have improved productivity throughput and piece-part quality. Some hi-feed insert geometries can be interchanged with standard insert geometries in the same pocket. Smaller lead angles promote aggressive feed rates using the chip thinning principle, according to Dieken.

Groove or other tool geometry that breaks chips into small fragments as they come off the workpiece. Designed to prevent chips from becoming so long that they are difficult to control, catch in turning parts and cause safety problems.

For face grooving miniature parts, Iscar recommends its standard solid-carbide inserts, which start at 1mm wide and an ID of 0.236 ".

Myers added that guiding a continuous grooving chip from the cutting zone is important because a broken chip can lodge in the workpiece and fracture the insert. “This process is critical on small bores where the cutting tool is smaller, the room for chip evacuation is limited and the grooves are deep inside a bored hole,” he said.

“That being said, you still can use a replaceable insert tool for grooving in bores as small as 0.300 " in diameter,” Drape said. “These are usually single-edge replaceable inserts, but they provide a greater axial depth into the component and a more reasonable cost for longer reaches than a solid-carbide tool could provide.”

One parts manufacturer used the Multi-Master to make grooves in a 3 "-long dental probe on a Tsugami Swiss-style machine. The part is made of 17-4 PH heat-treated stainless steel and its largest diameter is 0.160 ". The instrument point tapers to a 0.0008 " tool-generated radius. The OD perpendicular groove and an OD parallel slot are both made with the same MM GRIT Multi-Master 0.020 "-wide insert. The parallel slot is about 0.750 " in length along two diameters. The 0.020 "-wide perpendicular groove on the rear OD was generated by the same rotating MM GRIT Multi-Master insert after picking off on the machine’s subspindle end. Grooving and slotting time decreased by 60 percent compared to the original process developed by another supplier, which used three tools.

Machining, normally milling, that creates slots, grooves and similar recesses in workpieces, including T-slots and dovetails.

For ID grooving and undercutting, the company recommends a coolant-feed, solid-carbide insert, starting at a 0.002 " radius and a 0.024 " ID.

Denitool Inc. (615) 867-8882 www.denitool.com HORN USA Inc. (888) 818-4676 www.hornusa.com Iscar Metals Inc. (877) BY-ISCAR www.iscarmetals.com Thinbit/Kaiser Tool Co. Inc. (888) THINBIT www.thinbit.com Mitsubishi Materials U.S.A. Corp. (800) 523-0800 www.mitsubishicarbide.com

There are various grooves and grooving techniques required for miniature parts. According to Ken King, COO of Thinbit/Kaiser Tool Co. Inc., Fort Wayne, Ind., grooving miniature parts requires determining what the grooves will be used for, what types of grooves are needed and what types of geometries the grooves must have. In miniature part production, grooves are typically for connecting parts (snap rings), sealing mating surfaces (O-rings), thread relief, holding lubrication and reducing surface contact. Types of grooves include OD and ID grooves, face grooves and angled grooves. “Grooves can blend into other features and multifunction tools can produce more than grooves, so creating a definition can be tricky, but grooves can have chamfers, radii and angles,” said King.

Myers of Denitool agreed that indexable grooving inserts should always be considered when the part or bore size permits access. He noted that Denitool’s smallest insert grooving system can enter a 0.150 " bore. “Insert inscribed circle sizes produced by Denitool have decreased over the past 5 years,” said Myers. “Our partnerships with key customers worldwide have indicated a clear need for development in this area.”

Chip management factors include insert and chipbreaker geometry as well as the feeds, speeds and toolpath. “In all grooving operations [including threading], cutting pressure is very high compared to other cutting [operations] because of the length of the cutting edge required to make the groove and the confined chip-removal space,” said Myers. “The reduction of this cutting pressure is critical to successful grooving and can be accomplished mainly by using proper feeds and speeds, tool design and lubricants.” The recommended speeds and feeds depend on the type and hardness of the workpiece material, according to Myers. He recommends lubricants with high lubricity for miniature part applications.

Imaginary circle that touches all sides of an insert. Used to establish size. Measurements are in fractions of an inch and describe the diameter of the circle.

With products such as medical implants, high-precision fuel injectors and electronics like the iPod growing in popularity, the growth trajectory for miniature parts will continue. These devices are not only getting smaller, they are also packed with more components. Grooving is one of the many metalcutting applications that will enable manufacturers to meet the growing demand for high-precision parts that make these devices work. CTE

Microprocessor-based controller dedicated to a machine tool that permits the creation or modification of parts. Programmed numerical control activates the machine’s servos and spindle drives and controls the various machining operations. See DNC, direct numerical control; NC, numerical control.

Indexables are traditionally used for most roughing applications. However, improvements in manufacturing accuracy and methodology also are increasingly opening doors for use in finishing applications, Ingersoll said.

According to Andy Kelling, national product manager, screw machines, Iscar Metals Inc., Arlington, Texas, the overall length of most miniature parts that require grooving ranges from 1mm to 25.4mm, with diameters starting at 0.2mm. These parts are used in dental implants, stents, probes, instruments, electrodes, injectors, small fasteners and internal valve body components.

Solid-carbide tools are preferable for the smallest bores, but shops should keep in mind that some manufacturers, HORN included, call small solid-carbide tools inserts because they typically require a specific toolholder, said Drape.

In addition, the repeatability of an insert below 0.300 " in diameter will not be as accurate as a solid-carbide tool, said Drape. “We’re not saying that inserts are bad in these kinds of applications,” he said. “However, shops using them might have to fight these kinds of problems. That’s why we stay with solid-carbide tools for grooving applications requiring tools below 0.300 " in diameter.”

Benefits of using indexable tooling (when compared to solid tooling), according to the supplier, include:

Space provided behind the cutting edges to prevent rubbing. Sometimes called primary relief. Secondary relief provides additional space behind primary relief. Relief on end teeth is axial relief; relief on side teeth is peripheral relief.

Secures a cutting tool during a machining operation. Basic types include block, cartridge, chuck, collet, fixed, modular, quick-change and rotating.

Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.

Drilling deep holes that are too large to be drilled by high-pressure coolant drills or gundrills. Trepanning generates a solid core and normally requires a big, powerful machine. Shallow trepanning operations can be performed on modified engine or turret lathes or on boring machines. See boring; drilling; spade drilling.

Manufacturers of miniature parts typically use Swiss-type and multiple-spindle machines, but any machine—including smaller CNC lathes—that can hold the part and the tooling can produce such parts.

“The PVD coating is different from standard coatings,” said Hasto. “It’s a multilayer-nanoscale, titanium-aluminum-nitride coating that is impregnated into the carbide for better wear resistance, improved tool life, and increased productivity.”

Dimension that defines the exterior diameter of a cylindrical or round part. See ID, inner diameter.

For heavy-duty precision machining, Ingersoll Cutting Tools, Rockford, Illinois, provides custom-indexable tooling solutions for applications in aerospace, rail, oil and gas, and automotive drivetrain. This includes products designed for use with the latest CNC machine tools as well as legacy equipment.

Another issue when grooving miniature parts is the choice between insertable and solid-carbide tools. Many shops like to use inserts whenever possible due to their lower unit costs, but there are size limitations and other considerations that factor into the decision (see sidebar on page 61).

Indexable centering tools feature solid tool performance with the economy of indexable tooling where only the cutting tip is replaced, according to the company. The C-Centering Cutter, for example, can face mill, back chamfer, and chamfer, making it a multifunctional tool.

Tool path programming for PrimeTurning is supported by CAM partners for generating optimized NC codes to speed turning. PrimeTurning is recommended for mass production or components needing frequent setups and tool changes on machines, including turning centers, vertical lathes, and multitasking machines. For external turning, it is best suited for short and compact components and slender components using a tailstock. For internal turning, it is best suited for diameters above 40 mm and overhangs up to 8-10 XD. Combining Y-axis turning with non-linear turning or PrimeTurning further boosts productivity, according to the supplier.

Indexable cutting tools can offer significant advantages over standard solid-carbide round tools, depending on the application, according to Matt Hasto, applications engineer, Big Daishowa Inc., Hoffman Estates, Illinois. He cited applications for chamfering, back-spot facing, end milling, and face milling for the company’s latest ACT 200 and ACT 300 grades and new PVD coating.

The C-Cutter Mini features a sharp edge for smoother milling due to reduced resistance on the insert. The coating provides wear resistance, increasing the number of cycles that can be run before it’s necessary to index the insert to a new edge, according to the supplier.

Indexable insert cutting tools continue to evolve from predominantly roughing applications to finish machining, and are becoming available in smaller diameter tools. The most obvious advantages of indexables lie in their ability to multiply the number of effective cutting edges without the major commitment typically needed for solid-carbide round tools.

Any machining process used to part metal or other material or give a workpiece a new configuration. Conventionally applies to machining operations in which a cutting tool mechanically removes material in the form of chips; applies to any process in which metal or material is removed to create new shapes. See metalforming.

Grade and geometry flexibility—Indexable inserts are offered with multiple corner sizes, geometries, and grades that fit the same pocket.

Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.

The latest advancement for Big Daishowa’s ultra-high-feed chamfering mill now has four C-Cutter Mini inserts instead of two, and a much smaller diameter that allows for higher spindle speed. An increased number of edges produces a dramatically faster feed rate, leading to shorter cutting times and cost savings, according to Hasto.

Y-axis turning, as the name implies, makes use of the Y-axis. All three axes are used simultaneously when machining. The tool rotates around its own center. The insert is placed in the Y-Z plane, and the milling spindle axis interpolates during turning. This allows intricate shapes to be machined with a single tool.

Grooving miniature parts requires a conservative cutting approach and a choice between solid-carbide and insertable tools.

Enlarging a hole that already has been drilled or cored. Generally, it is an operation of truing the previously drilled hole with a single-point, lathe-type tool. Boring is essentially internal turning, in that usually a single-point cutting tool forms the internal shape. Some tools are available with two cutting edges to balance cutting forces.

In keeping with digitization and Industry 4.0 advances, there has also been a lot of work done with the machine controls as technology has evolved to use RFID, smart tools, and robots to enhance the tooling and bring more productivity to the machines, the company said.

According to Drape, the main challenge for ID grooving in miniature parts is the tiny tools’ relative lack of strength. “When you are going into a 1mm bore, you need a tool that has to fit axially into that 1mm bore and then apply radial force to [the bore]. This cutting pressure typically tries to bend the tool dramatically, causing form and chatter problems as well as tool breakage and chip evacuation issues,” he said.

“One could say that these advances, together with advanced capabilities in modern machines and CAM software, have paved the way for the new Y-axis turning method,” said Staffan Lundström, product manager, turning, Sandvik Coromant. “And with the tools and method now in place, we look forward to exploring the possibilities this method can present to our customers.”

Successful machining with indexable inserts begins with a rigid toolholding connection, whether it’s used on new or legacy machine tools for turning, milling, drilling, or reaming. Advanced machines might have a leg up, though, according to Kennametal Inc., Latrobe, Pa. New modern machining centers utilize system tools like the KM modular system that allows easy tool change and enables pre-setup in front of the machine with much less machine downtime.

Hardness is a measure of the resistance of a material to surface indentation or abrasion. There is no absolute scale for hardness. In order to express hardness quantitatively, each type of test has its own scale, which defines hardness. Indentation hardness obtained through static methods is measured by Brinell, Rockwell, Vickers and Knoop tests. Hardness without indentation is measured by a dynamic method, known as the Scleroscope test.

About the Author: Alan Rooks is editorial director for Cutting Tool Engineering. He has been a business journalist for the past 27 years. Contact him at (847) 714-0174 or by e-mail at arooks@jwr.com.

Benefits of Y-axis turning include the ability to machine several features with a single tool without tool changes, reducing cycle time, and minimizing the risk of blend points or irregularities between adjacent machined surfaces, Sandvik Coromant said. Wiper inserts can be kept perpendicular to the surface to also produce a wiper effect on tapered surfaces. The main cutting forces are directed into the machine spindle, improving stability and reducing the risk of vibration. A constant entering angle dramatically improves chip control and makes it easier to avoid chip jamming.

Advances in indexable cutter design have improved machining results from both legacy and advanced machines. New geometries, grades, and physical and chemical vapor coatings (PVD & CVD) have been introduced where improved chip formation, higher edge toughness, and more thermal and abrasion wear resistance are needed to meet a challenging material application. These include mitral-valve (MV) geometry for steel machining, High-PIMS KCS10B PVD grade for high-temp alloy turning, and KCK20B grade for milling applications, as well as KENGold KCP25C CVD-coated grade for steel machining. All of these reduce the risk of machine breakdown, increase output rates, and reduce machine downtime, which leads into overall productivity improvement, according to Kennametal.

DeepTrio indexable gundrills for machining centers, lathes, and gundrill machines are replacing brazed carbide tip gundrills. “DeepTrio indexable gundrills provide up to six times the performance as well as reducing downtime for tool changes,” said John Lundholm, Ingersoll’s DeepTrio and drills product manager. “When a brazed gundrill needs to be replaced, the machine is shut down for a long period of time. DeepTrio inserts have three cutting edges, so indexing the insert is accomplished in seconds instead of an hour. An added benefit is that the DeepTrio indexable gundrill uses the same guide bushings and support bushings as a brazed gundrill, so no machine component changes are necessary,” he noted.

OD grooving, such as parting off, can be performed with a PENTACUT tool with five cutting edges and a molded chipformer.

Replaceable tool that clamps into a tool body, drill, mill or other cutter body designed to accommodate inserts. Most inserts are made of cemented carbide. Often they are coated with a hard material. Other insert materials are ceramic, cermet, polycrystalline cubic boron nitride and polycrystalline diamond. The insert is used until dull, then indexed, or turned, to expose a fresh cutting edge. When the entire insert is dull, it is usually discarded. Some inserts can be resharpened.

Measure of the relative efficiency with which a cutting fluid or lubricant reduces friction between surfaces.

Condition of vibration involving the machine, workpiece and cutting tool. Once this condition arises, it is often self-sustaining until the problem is corrected. Chatter can be identified when lines or grooves appear at regular intervals in the workpiece. These lines or grooves are caused by the teeth of the cutter as they vibrate in and out of the workpiece and their spacing depends on the frequency of vibration.

Generally, new machines are more agile and have higher speed capabilities. System tools that serve as the link between the cutting edge and machine are a key factor for high performance and results. For example, development of the KM coupling for vertical turning machines, lathes, and multitasking machines provides secure access to performing almost any operation with no compromise in performance, according to Kennametal.

Applying small grooving tools requires a different machining approach, including much lower feed rates than with larger grooving tools, said Drape. “You need to slow the feed rate down so as not to put too much pressure on the tool and break it,” he said. Typical feed rates for miniature grooving tools with 2mm to 6mm minimum bore sizes are from 0.0002 to 0.0008 ipr. Drape added that tool monitoring is essential when using tiny grooving tools because it is hard to visually or audibly detect a broken tool when the cutting edge is so small.

Space provided behind a tool’s land or relief to prevent rubbing and subsequent premature deterioration of the tool. See land; relief.

When making this choice, “first define an insert,” said HORN’s Drape. “There are many types of inserts available. Some are indexable [with multiple cutting edges] and others are single use.”

A typical solid-carbide grooving tool looks like an L, and the leg (noncutting) portion has to fit within the bore diameter. For a 2mm bore, that means the most the noncutting edge can be is 2mm minus a clearance. The foot portion of the L-shape has to be even smaller than the leg portion, which weakens it dramatically. Small-diameter bores also limit groove depth. “If you want to put a groove in a 2mm-dia. bore, the most tmax (radial DOC) is 0.2mm,” said Drape. Consider the machining of a 2mm bore. A grooving tool with a 1mm leg would require a safety factor of 0.2mm between the leg and the component. Theoretically, then, the tool could cut a 0.8mm-deep groove. However, with only 1mm of leg, the tool will probably be too weak to actually cut a groove of that depth, and would be limited instead to a 0.2mm groove depth, said Drape.

“Some people are put off by the fact that a solid-carbide tool in some situations can cost $70, while an insert with three cutting edges costs just $12,” said Drape. “But that $12 insert goes into a $300 to $400 toolholder, and since the holder is very small, it is relatively weak and has to eventually be thrown away, possibly after using 10 inserts. When you add up those costs, your price is getting very comparable to solid carbide, and if you don’t get 10 uses out of a holder, and you get just one or two, the total cost is a lot more.”

Other miniature grooving applications include fittings for automotive airbag components, fuel injection components, aerospace components and spray nozzles.

According to Ingersoll, as machines become more capable to run at higher rpm and table feeds, new indexable tool geometries such as hi-feed and barrel cutters produce greater productivity and quality. Ingersoll’s SFeedUp products combine enhancements that focus on high speeds with high feeds. “Many new machines have higher speeds and lower torque, so we expect the trend of hi-feed machining with lighter Ap (depths of cut) or Ae (stepover) to continue,” said Mike Dieken, milling product manager.

Still, he agreed that it is generally best to use inserts whenever possible due to cost concerns. “Most [grooving tool] manufacturers go down to 5/16 ", or an 8mm bore diameter, with inserts,” said King. “Regarding groove width, we go to 0.004 " as a standard size and offer every 0.001 " increment to 0.250 ". The trend is to smaller parts that require smaller grooves.”

Strip or block of precision-ground stock used to elevate a workpiece, while keeping it parallel to the worktable, to prevent cutter/table contact.

KM modular tooling offers a great deal of flexibility and allows customers to configure the machine to their needs. Higher speeds, rigidity, and agility are capabilities attractive to job shops that take on various types of work, enabling them to maximize return on their capital investments. Another addition to the KM system is the KM4X100 or KM4X63 coupling. This connection has been designed for heavy applications using both indexable and solid tooling. Wherever there is a need to increase bending moments or long reaches, KM4X100/63 would be the optimum connection, Kennametal said.

While there are many types of grooving operations that can be performed on miniature parts, an end user first needs to define grooving. “HORN defines a grooving operation as any operation removing material between two flanks,” Drape said. “Keeping your mind open, this means:

Trends in Ingersoll’s indexable insert development include smaller indexable tools—as small as 0.250" (6.4 mm) for a single-effective indexable end mill, and 0.375" (9.5 mm) for three-effective units. Advances include reinforced edges for aggressive roughing applications, coatings with better adhesion, and hi-feed geometries in many milling and turning product lines. The new IN2055 grade will replace the current IN2005 for all deep hole-drilling families. IN2055 is said to enable four times longer tool life in machining steel, stainless, and high-temp alloys.

Operation in which a cutter progressively enlarges a slot or hole or shapes a workpiece exterior. Low teeth start the cut, intermediate teeth remove the majority of the material and high teeth finish the task. Broaching can be a one-step operation, as opposed to milling and slotting, which require repeated passes. Typically, however, broaching also involves multiple passes.

Whether you’re end milling, pilot drilling, helical milling, or shoulder milling, Big Daishowa offers high-precision end mills that achieve smooth and quiet milling. Indexable mills provide sharp cutting edges in both high radial and axial directions that help maintain smooth and quiet end milling. BIG-PLUS dual-contact design allows for higher precision and rigidity in precision applications. All models also come in modular setups with additional inserts including CKB connections for long reach or heavy applications.