It was cp1 which is a grade 4 and it was definitely pushing the spindle power wise. Its interesting the difference in figures on the calculators.

I listened to about the last 1/4th of program #6, so I can learn about the chipload vs. DOC thing, but I didn’t hear it, can you narrow-down where they go through that please/

and got those gorgeous HDPE chips using a 2-flute 1/4" endmill at 5000mm/min and 10.000RPM, i.e. a fat chipload of 0.01"

Level 1: Preconventional. Punishment-Obedience orientation. Elementary school examples. A fourth grade girl refrains from running in the hallway to avoid ...

I used some 2mm thick aluminum I had on hand, and cut the cover profile with a 1/8" 2flute ZrN-coated endmill (Carbide3D’s #102-Z), 12.000RPM, 450mm/min (18"/min), DOC 0.3mm (0.012"), ramping + lead-in/lead_out:

Quality is the backbone of our company. With proper care, Bentley products will retain their appearance and perform exceptionally for years to come.

That’s alot of information to put just to say it liked 0.0015 to 0.002 actual chipload, and that’s spread over facing, adaptive, boring and contour ops. Chatter was addressed usually with feed override. Tool pressure +1

Aug 21, 2024 — Job openings at Western Milling ... Overview WHO WE ARE:Pinnacle Premix provides premixing, manufacturing, and distribution of formulated products ...

Sep 13, 2024 — Set our various mmio mappings to NULL. This should make it easier to catch something rogue trying to mess with mmio after device removal.

Looks like this 60kRPM spindle did you get the collets too? I’ve learned that it’s much easier and accurate to measure spindle cutting power, RPM, and calculate cutting force than it is to measure/calculate it. But, I’d be happy to provide info on both approaches if you like.

The end of Podcast 006 supports the @Vince.Fab claim that 0.001" is a good starting point for chip-load, even in much harder metals. This video explains the value of using greater cut depths (which the lower chip loads enable) and demonstrates the value of using quiet spindles. Or, you could “drink the Kool-Aid” provided in Podcast 007.

Catalogue of the Newburyport Public Library, January 1, 1879 [Newburyport Public Library] on Amazon.com. *FREE* shipping on qualifying offers.

I would also add the type of Shapeoko or Nomad, if it is equipped with upgrades like HDZ that may impact rigidity as they will all have an impact on F&S.

Table Saws (18) · 10" Jobsite Saw With Folding Stand · F2 Fusion Tablesaw · 10" Cabinet Table Saw 175HP 120V/240V · King Industrial 10" Extreme Cabinet Saw With ...

With the newfound revelation that I can go 200"/min (facepalm…), and since I wanted to test chiploads for soft plastics, in my case HDPE, I extended the table by another factor of x2 (consistent with my previous finding in HDPE, and data from Winston’s video on machining HDPE on the Nomad)

We just picked up a really nice infrared camera and it would be fun to change chiploads and see the temperature differences

@Vince.Fab Thanks for the added info. Here’s why I think its useful. Feed rate (IPM), axial depth of cut (ADC), and radial depth of cut (RDC) are necessary to determine material removal rate (MRR = IPM X ADC X RDC). MRR and material type determine how much cutting power is required. Cutting Power = MRR X material’s unit power. Cutting power (HP) = Cutter Speed (RPM) X Cutter Torque (ft-lbf) / 5252. Cutting force (lbf) = cutter torque / cutter radius. Machine and workpiece force = Cutter force.

Blockquote So it seems like a Podcast w/o any video? Is there a link to a video you intended to post? I listened to about the last 1/4th of program #6, so I can learn about the chipload vs. DOC thing, but I didn’t hear it, can you narrow-down where they go through that please/ TIA!

Machine rigidity (torsional stiffness) determines how much machine deflection (positional error) results from a given cutting force, which is plotted in the charts. If cutting force exceeds the capability of the machine, something will slip/break. Here’s one way of measuring that limit. Fortunately(?), luggage scales will suffice for Shapeokos because they are far more limited in force. Applying forces to the ends of endmills and measuring the resulting endmill deflections would help determine acceptable forces in the X, Y, and Z axes.

Using what endmill diameter ? Just asking because I recently applied the recipe from the table discussed above in the thread, to do a profile cut using a 1/8" endmill in aluminium, targeting a chipload of 0.0005" (halving the 0.001" for 1/4"), and it turned out to be too little, so I used +50% feedrate override and the cut went perfectly. So I would tend to update that table with 0.00075" starting value for 1/8" and 0.0015" for 1/4".

h7 -12 -15 -18 -21 -25 -30 -35 -40 -46 -52 -57 -0 -0 -0 -0 -0 -0 -0 -0 -0 -0 ... ISO Hole Tolerance, ISO Hole Tolerances, Hole Tolerance, ISO 286-2 Hole.

Jan 13, 2019 — Remaking the recessed chamfer in Fusion360. We have a quite detailed reference to work with. For this step-by-step tutorial, let's make a simple case and work ...

The end of Podcast 006 supports the @Vince.Fab claim that 0.001" is a good starting point for chip-load, even in much harder metals. This video explains the value of using greater cut depths (which the lower chip loads enable) and demonstrates the value of using quiet spindles. Or, you could “drink the Kool-Aid ” provided in Podcast 007.

Read our Weekly Chatter, a newsletter published each Friday at 4pm ET. Related Links: The Episcopal Diocese of Indianapolis St. Peter's on ...

Buy 3pcs Hand Thread Tap Set HSS Metric Plug Tap Metal Screw Tap Drill M2/M2.5/M3/M3.5/M4/M5/M6/M8/M10/M12 Hand Tool Set at Aliexpress for .

[EDIT] I fixed the typos, I obviously meant 0.01", not 0.1". I’m so bad at this Imperial units things, I wish I could use millimeters only and still be understood out here

IMO it would be really helpful and beneficial for folks to provide full details when they post results. IE material being cut, endmill used, depth of cut, width of cut, spindle speed, feed rate, as well as spindle/router and machine used.

I plugged the information provided by @Julien and @Vince.Fab into the GWizard, HSMAdvisor, and Kennametal calculators to help understand and compare cutting powers and forces. Details are provided in the attachment and the results are summarized below. Due to the small values involved, neither Kennametal nor HSMAdvisor had enough displayed resolution to provide accurate results. So, as shown in the attachment, I used their highest resolution results to calculate the other results more accurately. I assumed that Julien was cutting 6061 T6 aluminum. Vince didn’t say which type of Titanium he was cutting, so I did calculations for both Grade 1 and Grade 5 (the most likely grade).

Image

Nov 7, 2022 — You first drill with a 1/4" diameter drill then countersink the hole to the proper depth using a 1/4" flathead screw as a gage.

Adaptive on Nomad 5000 rpm, 164sfm, 4 flute 0.125 40ipm, 0.002 chipload, 0.0015 actual maximal chip Titanium 8mm-0.080" 0.020 Radial Doc, 0.030 axial