Thread millvs tap

{"Overall Length - Inch (L)":["3","4"],"Number of Flutes":["4","5","6"],"Major Diameter - Inch":["0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1"],"Threads Per Inch":["20","28","18","24","16","14","13","12","11","10","9","8"],"Neck Length - Inch (L1)":["0.448","0.429","0.783","0.751","1","0.944","1.09"],"Diameter - Inch (D)":["0.18","0.245","0.3","0.35","0.37","0.43","0.45","0.495","0.62","0.745"],"Length of Cut - Inch (Lc)":["0.401","0.393","0.5","0.562","0.582","0.712","0.7","0.767","0.75","0.917","0.889","1","0.944","1.2","1.125","1.33","1.358","1.625","1.582"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5","0.625","0.75"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Type":["1","2"],"Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1"],"Helix Angle - Degree":"11","Web Literature 1":"8002024CA-TP,38|8002024CA-TPT,34","Web Literature 4":"800390CA","Substrate":"Carbide","Surface Treatment":"EXO","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Units":"Inch","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Good","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","Alloy Steels : 4140; 4340":"P; Best","High Carbon Steel : 1065":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Low Carbon Steel : 1010; 1018":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","Thread Type":["UNC","UNF"],"Product Overview":"UNC, UNF, UNEF, UNS, Helical Flute, EXO, Coolant-Thru","List Name":"WXO-ST-PNC","Coolant Thru":"Yes","Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Diameter-Sizes":"0.18\" - 0.745\"","Flute-Sizes":"-","Neck-Sizes":"0.429\" - 1.09\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041050/Taps_-_Thread_Mill_-_EXOCARB_Thread_Mill_-_List_41050_-_Catalog_-_Type_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041050/Taps_-_Thread_Mill_-_EXOCARB_Thread_Mill_-_List_41050_-_Catalog_-_Type_2"],"Friendly Name":"41050"}

During a quenching heat treatment, the material is heated up to suitable temperatures and then quenched in oil to fully harden, varying on the kind of steel ...

Thread millCUTTER insert

{"Overall Length - Inch (L)":["3","3.5","4"],"Major Diameter - Inch":["0.0625","0.125","0.25","0.375","0.5","1"],"Number of Flutes":["4","5","6"],"Threads Per Inch":["27","18","14","11.5"],"Neck Length - Inch (L1)":["0.48","0.72"],"Diameter - Inch (D)":["0.223","0.302","0.381","0.461","0.617","0.737"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.407","0.611","0.786","0.957"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Thread Size - Inch":["1/16","1/8","1/4","3/8","1/2","1"],"Helix Angle - Degree":"11","Type":["3","4"],"Web Literature 1":"8002024CA-TP,27|8002024CA-TPT,31","Web Literature 3":"800384CA|80064CA|80062CA","Web Literature 4":"800390CA","Web Literature 2":"80061CA-V2","Brand":"A Brand","Short Description":"Advanced Performance One Pass Thread Mill","List Name":"AT-1 NPT","Substrate":"Carbide","Product Overview":"Carbide, EgiAs Coating, NPT","Surface Treatment":"EgiAs","Feature 3":"EgiAs Coating","Benefit 3":"For exceptional wear resistance","Benefit 4":"For high wear resistance and toughness","Notes":"For internal threads only","Benefit 1":"For reduced vibration","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Shank Tolerance":"h6","Web Video 1":"https://youtu.be/ladZnTkQl_E","Web Video 2":"https://youtu.be/ladZnTkQl_E","Web Video 3":"https://youtu.be/ladZnTkQl_E","Units":"Inch","Benefit 2":"Increases tool stability","Cast Iron":"K; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Type":"NPT","Alloy Steels : 4140; 4340":"P; Best","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Cutting Direction":"RH","Helix Direction":"RH","Feature 2":"Right-Hand Cut & Left-Hand Helix Geometry","Full Description":"The A Brand AT-1 threadmill is designed with a left-hand helix for a small pitch diameter difference between the hole entry and the bottom of the hole, allowing a delay in gauge-out failure. Longer tool life can be achieved with elimination of “zero cutting” for correcting bending.","Product Category":"Thread Mills","Feature 4":"Ultra-Fine Grain Carbide","Feature 1":"Unequal Spacing / Variable Lead Flute","Diameter-Sizes":"0.223\" - 0.737\"","Flute-Sizes":"-","Neck-Sizes":"0.48\" - 0.72\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016630/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16630_-_NPT_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016630/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16630_-_NPT_-_Type_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016630/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16630_-_NPT_-_Type_4"],"Friendly Name":"16630"}

Spotting for HSS/Cobalt Drills. Select a spotting drill with a point angle < than the final drill point angle. The spot drill diameter should be 30% less than ...

Single pointThread Mill

It can be broken down into four main groups: oilfield directional drilling, utility installation directional drilling, directional boring (horizontal ...

{"Diameter - Metric (D)":["4.5","5.7","7.7","9.7","10.7","13.7","11.7","15.7","19.7"],"Number of Flutes":["4","5","6"],"Major Diameter - Metric":["6","8","10","12","14","16","18","20","24"],"Overall Length - Metric (L)":["75","85","100","120","135","150"],"Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Pitch":["0.75","1","1.25","1.5","1.75","2","2.5","3"],"Neck Length - Metric (L1)":["16","34.5","39","50"],"Length of Cut - Metric (Lc)":["13.5","14","18","18.75","22","22.5","24","26","27.5","27","28","31.5","32","36","42.5","43.5","45","52","54"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Type":["1","2"],"Helix Angle - Degree":"11","Web Literature 1":"8002024CA-TP,26|8002024CA-TPT,31","Web Literature 3":"800384CA|80064CA|80062CA","Web Literature 4":"800390CA","Web Literature 2":"80061CA-V2","Brand":"A Brand","Short Description":"Advanced Performance One Pass Thread Mill","List Name":"AT-1","Substrate":"Carbide","Product Overview":"Carbide, EgiAs Coating, Metric Sizes","Surface Treatment":"EgiAs","Feature 3":"EgiAs Coating","Benefit 3":"For exceptional wear resistance","Benefit 4":"For high wear resistance and toughness","Notes":"For internal threads only","Benefit 1":"For reduced vibration","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Shank Tolerance":"h6","Web Video 1":"https://youtu.be/ladZnTkQl_E","Web Video 2":"https://youtu.be/ladZnTkQl_E","Web Video 3":"https://youtu.be/ladZnTkQl_E","Benefit 2":"Increases tool stability","Cast Iron":"K; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 400":"M; Good","Thread Size - Metric":["M6","M8","M10","M12","M14","M16","M18","M20","M24"],"Units":"Metric","Thread Type":["MF","M"],"Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Alloy Steels : 4140; 4340":"P; Best","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Cutting Direction":"RH","Helix Direction":"RH","Feature 2":"Right-Hand Cut & Left-Hand Helix Geometry","Full Description":"The A Brand AT-1 threadmill is designed with a left-hand helix for a small pitch diameter difference between the hole entry and the bottom of the hole, allowing a delay in gauge-out failure. Longer tool life can be achieved with elimination of “zero cutting” for correcting bending.","Product Category":"Thread Mills","Feature 4":"Ultra-Fine Grain Carbide","Feature 1":"Unequal Spacing / Variable Lead Flute","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Diameter-Sizes":"4.5mm - 19.7mm","Flute-Sizes":"-","Neck-Sizes":"16mm - 50mm","Taper-Sizes":"-","Overall-Sizes":"75mm - 150mm","Shank-Sizes":"6mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016620/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16620_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016620/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16620_-_Type_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016620/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16620_-_Type_4"],"Friendly Name":"16620"}

{"Number of Flutes":["3","4","5"],"Diameter - Metric (D)":["4.5","6","7.5","9.5","10","12","16","20"],"Major Diameter - Metric":["6","8","10","12","14","16","20","24"],"Overall Length - Metric (L)":["60","65","70","85","95","105","120"],"Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Neck Length - Metric (L1)":["15","26","28"],"Pitch":["1","1.25","1.5","1.75","2","2.5","3"],"Length of Cut - Metric (Lc)":["13","17","17.5","21","22.5","26.3","30","34.5","34","42","42.5","50","51","10","13.8","16","16.25","16.5","20","24","25.5","31.5"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Type":["1","2"],"Helix Angle - Degree":"11-30","Web Literature 1":"8002024CA-TP,37|8002024CA-TPT,34","Web Literature 2":"800257CA-V3","Web Literature 4":"800390CA","Substrate":"Carbide","Surface Treatment":"EXO","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Best","Thread Type":["M","MF"],"Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Thread Size - Metric":["M6","M8","M10","M12","M14","M16","M20","M24"],"Units":"Metric","Product Overview":"Metric, MJ, Helical Flute, EXO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","List Name":"OT-SFT-PNGT/WX-PNC","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Diameter-Sizes":"4.5mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"15mm - 28mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 120mm","Shank-Sizes":"6mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041100/Taps_-_Tap_-_EXOCARB_-_List_41100_-_Thread_Mills_-_Catalog"],"Friendly Name":"41100"}

Thread Millcutter

By pressing and sintering non-metallic ceramic powder, inserts are obtained which can withstand higher cutting speeds than, for example, High speed steel or cemented carbide cutters. However, ceramic cutter's brittleness and sensitivity to thermal shocks limit the area of use. Through fiber reinforcement, these weaknesses can be slightly reduced. There are inserts that are entirely made of ceramic and hybrid versions where only the cutting tip is made of ceramic.

Highly recommended! Support our local mill! ... Y'all are the best. Our nubians love your feed and stay in great condition. Cheaper prices, better quality! ... If ...

{"Number of Flutes":["3","4"],"Overall Length - Inch (L)":["3","4"],"Major Diameter - Inch":["0.0625","0.125","0.25","0.5","1","2.5"],"Threads Per Inch":["27","18","14","11.5","8"],"Neck Length - Inch (L1)":["0.44","1.04"],"Diameter - Inch (D)":["0.186","0.286","0.334","0.575","0.785","0.917"],"Length of Cut - Inch (Lc)":["0.409","0.61","0.787","0.957","1.358"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.625","1"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Thread Size - Inch":["1/16","1/8","1/4","1/2","1","2-1/2"],"Type":["3","4"],"Helix Angle - Degree":"30","Web Literature 1":"8002024CA-TP,40|8002024CA-TPT,34","Web Literature 4":"800390CA","Substrate":"Carbide","Surface Treatment":"EXO","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Units":"Inch","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Type":"NPT","Product Overview":"NPT, Helical Flute, EXO","Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","List Name":"OT-SFT-PNGT NPT","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","Diameter-Sizes":"0.186\" - 0.917\"","Flute-Sizes":"-","Neck-Sizes":"0.44\" - 1.04\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2042000/Taps_-_Thread_Mill_-_EXOCARB_Thread_Mill_-_List_42000_-_Type_4_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2042000/Taps_-_Thread_Mill_-_EXOCARB_Thread_Mill_-_List_42000_-_Type_3_-_Catalog"],"Friendly Name":"42000"}

You can use these carbide end mills to cut a square edge into metal, wood, wax, and plastic. *1/4" tooling will require and 1/4" ER-11 collet. *1/ ...

Oct 21, 2024 — CVE-2024-49860 Detail. Description. In the Linux kernel, the following vulnerability has been resolved: ACPI: sysfs: validate return type of ...

Threadmilling machine

{"Number of Flutes":"2","Major Diameter - Metric":["3","4","5","6","8","10","12"],"Neck Diameter - Metric (d1)":["1.82","2.3","3.1","3.48","4.81","5.84","7.07"],"Overall Length - Metric (L)":["50","70","80"],"Shank Diameter - Metric (d)":["6","8","10"],"Pitch":["0.5","0.7","0.8","1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["7.75","10.45","12.8","15.5","20.38","25.25","30.13","9.25","12.45","15.3","18.5","24.38","30.25","36.13"],"Diameter - Metric (D)":["2.4","3.1","4","4.6","6.2","7.5","9"],"Length of Cut - Metric (Lc)":["1.5","2.1","2.4","3","3.75","4.5","5.25"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Feature 4":"2-Flute","Helix Angle - Degree":"30","Web Literature 1":"8002024CA-TP,32|8002024CA-TPT,33","Web Literature 2":"800319CA-V4","Web Literature 4":"800390CA","Brand":"A Brand","Short Description":"Advanced Performance End-Cutting Thread Mill for Non-ferrous Materials","List Name":"AT-2 R-SPEC","Substrate":"Carbide","Product Overview":"Carbide, Durorey Coating, End-Cutting Edge, Metric Sizes","Surface Treatment":"DLC-IGUSS","Feature 1":"DLC-IGUSS Coating","Feature 2":"End Cutting Edge","Notes":"For internal threads only","Benefit 4":"for wide chip room","Shank Tolerance":"h6","Benefit 2":"Helical drilling and threading can be done simultaneously","Web Video 1":"https://youtu.be/lK5CSk-uXnQ","Web Video 2":"https://youtu.be/lK5CSk-uXnQ","Web Video 3":"https://youtu.be/lK5CSk-uXnQ","Cutting Direction":"LH","Helix Direction":"LH","Thread Type":"M","Thread Size - Metric":["M3","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Benefit 3":"Prevents deflection of tool","Benefit 1":"prevents welding on the cutting edge","Full Description":"The high-efficiency thread mill AT-2 R-SPEC is engineered to dramatically reduce machining time in non-ferrous metal applications such as aluminum alloy by its continuous helical cutting ability, which combines drilling and threading into a single process.","Product Category":"Thread Mills","Feature 3":"Unique Cutting Edge Shape","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Coolant Thru":"Yes","Diameter-Sizes":"2.4mm - 9mm","Flute-Sizes":"-","Neck-Sizes":"7.75mm - 36.13mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 80mm","Shank-Sizes":"6mm - 10mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016642/End_Mills_-_End_Mill_-_A_Brand_AT-2_List_16642_-_AT-2_R-SPEC_-_Catalog"],"Friendly Name":"16642"}

{"Number of Flutes":"4","Major Diameter - Metric":["3","4","5","6","8","10","12"],"Neck Diameter - Metric (d1)":["1.82","2.3","3.1","3.48","4.81","5.84","7.07"],"Overall Length - Metric (L)":["50","70","80"],"Shank Diameter - Metric (d)":["6","10"],"Pitch":["0.5","0.7","0.8","1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["7.25","9.75","12","14.5","19.13","23.75","28.38"],"Diameter - Metric (D)":["2.4","3.1","4","4.6","6.2","7.5","9"],"Length of Cut - Metric (Lc)":["1.5","2.1","2.4","3","3.75","4.5","5.25"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Angle - Degree":"0","Web Literature 1":"8002024CA-TP,30|8002024CA-TPT,32","Web Literature 2":"800319CA-V4","Web Literature 4":"800390CA","Web Literature 3":"800392CA","Brand":"A Brand","Feature 4":"Added roughing teeth","Short Description":"Advanced Performance End-Cutting Thread Mill for High-Hardness Steel","List Name":"AT-2","Substrate":"Carbide","Product Overview":"Carbide, Durorey Coating, End-Cutting Edge, Metric Sizes, Left-Hand Cut","Benefit 2":"Controls tool deflection","Surface Treatment":"DUROREY","Benefit 3":"Enables climb milling to prolong tool life","Benefit 1":"enables superior heat resistance and high toughness optimized for high-hardness steel milling!","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Shank Tolerance":"h6","Web Video 1":"https://youtu.be/3w5ya1QxN9M","Web Video 2":"https://youtu.be/3w5ya1QxN9M","Web Video 3":"https://youtu.be/3w5ya1QxN9M","Cast Iron":"K; Best","Feature 3":"Left-hand cut configuration","Cutting Direction":"LH","Thread Type":"M","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Thread Size - Metric":["M3","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Feature 1":"Newly developed DUROREY coating","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","High Carbon Steel : 1065":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Low Carbon Steel : 1010; 1018":"P; Good","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Feature 2":"Special cutting edge shape","Full Description":"The OSG A Brand AT-2 Thread mills with end-cutting edge for high hardness steels is ideal for highly difficult high hardness steel applications. The risk of sudden tool breakage can be minimized by breaking chips into small and manageable pieces and evacuating them smoothly. Since no pilot hole is required, process integration and the risk of breakage can be avoided.","Product Category":"Thread Mills","Benefit 4":"to distribute the load","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Coolant Thru":"Yes","Diameter-Sizes":"2.4mm - 9mm","Flute-Sizes":"-","Neck-Sizes":"7.25mm - 28.38mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 80mm","Shank-Sizes":"6mm - 10mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16640_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16640_-_Extra_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16640_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16640_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16640_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/OSG_-_Website_-_Product_Overview_-_AT-2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016640/OSG_-_Website_-_Product_Overview_-_AT-2_-_3"],"Friendly Name":"16640"}

2023525 — The carbon fiber molding press is mainly used in the molding and pressing process of carbon fiber, glass fiber reinforced plastic, SMC, and other molding ...

{"Overall Length - Inch (L)":["3","3.5","3.75","4","4.5"],"Major Diameter - Inch":["0.0625","0.125","0.25","0.375","0.5","1"],"Number of Flutes":["4","5","6"],"Threads Per Inch":["27","18","14","11.5"],"Shank Diameter - Inch (d)":["0.25","0.313","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.593","0.889","1.143","1.391"],"Thread Length - Inch (Lc)":["0.593","0.889","1.143","1.391"],"Coolant Thru":"No","Brand":"A Brand","Cutting Direction":"RH","List Name":"AT-1 NPS","Meets 4H Class of Fit":"No","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Helix Direction":"RH","Meets 2B Class of Fit":"No","Thread Size - Inch":["1/16","1/8","1/4","3/8","1/2","1"],"Meets 3B Class of Fit":"No","Units":"Inch","Product Category":"Thread Mills","STI Thread":"No","Surface Treatment":"EgiAs","Thread Type":"NPS","Substrate":"Carbide","View Catalog Page":"Here","View Speed and Feed Page":"Here","Web Literature 2":"80061CA-V3","Alloy Steels : 4140; 4340":"P; Best","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 1":"for reduced vibration","Benefit 2":"increases tool stability","Benefit 3":"for exceptional wear resistance","Benefit 4":"for high wear resistance and toughness","Cast Iron":"K; Best","Diameter - Inch (D)":["0.223","0.302","0.381","0.459","0.617","0.737"],"Feature 1":"Unequal Spacing and Variable Lead Flute","Feature 2":"Right-Hand Cut and Left-Hand Helix Geometry","Feature 3":"EgiAs Coating","Feature 4":"Ultra-Fine Grain Carbide","Full Description":"The A Brand AT-1 threadmill is designed with a left-hand helix for a small pitch diameter difference between the hole entry and the bottom of the hole, allowing a delay in gauge-out failure. Longer tool life can be achieved with elimination of “zero cutting” for correcting bending.","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Helix Angle - Degree":"11","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Neck Length - Inch (L1)":["0.667","1"],"Product Overview":"AT-1, NPS","Shank Tolerance":"h6","Short Description":"Advanced Performance One Pass Thread Mill","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Good","Type":["2","1"],"Diameter-Sizes":"0.223\" - 0.737\"","Flute-Sizes":"-","Neck-Sizes":"0.667\" - 1\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 4.5\"","Shank-Sizes":"0.25\" - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016632/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16632_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016632/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16632_-_Angle"],"Friendly Name":"16632"}

Thread MillCNC

{"Number of Flutes":"4","Major Diameter - Inch":["0.164","0.19","0.25","0.3125","0.375","0.5"],"Neck Diameter - Inch (d1)":["0.0866","0.0988","0.1236","0.139","0.1626","0.1776","0.1945","0.2169","0.2776","0.3067"],"Threads Per Inch":["32","24","20","28","18","16","13"],"Neck Length - Inch (L1)":["0.4059","0.4843","0.6252","0.5894","0.7642","0.7295","0.9063","0.8543","1.1921","1.1252"],"Diameter - Inch (D)":["0.122","0.146","0.179","0.224","0.264","0.362"],"Length of Cut - Inch (Lc)":["0.0938","0.125","0.15","0.1071","0.1667","0.1875","0.2308"],"Shank Diameter - Inch (d)":["0.25","0.375"],"Overall Length - Inch (L)":["2","3","3.5"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Angle - Degree":"0","Web Literature 1":"8002024CA-TP,29|8002024CA-TPT,32","Web Literature 2":"800319CA-V4","Web Literature 4":"800390CA","Web Literature 3":"800392CA","Brand":"A Brand","Feature 4":"Added roughing teeth","Short Description":"Advanced Performance End-Cutting Thread Mill for High-Hardness Steel","List Name":"AT-2","Substrate":"Carbide","Product Overview":"Carbide, Durorey Coating, End-Cutting Edge, Inch Sizes, Left-Hand Cut","Benefit 2":"Controls tool deflection","Surface Treatment":"DUROREY","Benefit 3":"Enables climb milling to prolong tool life","Benefit 1":"enables superior heat resistance and high toughness optimized for high-hardness steel milling!","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Shank Tolerance":"h6","Web Video 1":"https://youtu.be/3w5ya1QxN9M","Web Video 2":"https://youtu.be/3w5ya1QxN9M","Web Video 3":"https://youtu.be/3w5ya1QxN9M","Units":"Inch","Cast Iron":"K; Best","Feature 3":"Left-hand cut configuration","Cutting Direction":"LH","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Feature 1":"Newly developed DUROREY coating","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Size - Number":["No. 8","No. 10"],"Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","High Carbon Steel : 1065":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Low Carbon Steel : 1010; 1018":"P; Good","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Feature 2":"Special cutting edge shape","Full Description":"The OSG A Brand AT-2 Thread mills with end-cutting edge for high hardness steels is ideal for highly difficult high hardness steel applications. The risk of sudden tool breakage can be minimized by breaking chips into small and manageable pieces and evacuating them smoothly. Since no pilot hole is required, process integration and the risk of breakage can be avoided.","Product Category":"Thread Mills","Benefit 4":"to distribute the load","Thread Type":["UNC","UNF"],"Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Thread Size - Inch":["1/4","5/16","3/8","1/2"],"Coolant Thru":"Yes","Diameter-Sizes":"0.122\" - 0.362\"","Flute-Sizes":"-","Neck-Sizes":"0.4059\" - 1.1921\"","Taper-Sizes":"-","Overall-Sizes":"2\" - 3.5\"","Shank-Sizes":"0.25\" - 0.375\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16645_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/OSG_-_Website_-_Product_Overview_-_AT-2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16645_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/OSG_-_Website_-_Product_Overview_-_AT-2_-_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/OSG_-_Website_-_Product_Overview_-_AT-2_-_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16645_-_Action_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016645/Taps_-_Thread_Mill_-_A_Brand_AT-2_-_List_16645_-_Workpiece_4"],"Friendly Name":"16645"}

IndexableThread Mill

S Progress — The major problems encountered when machining Inconel 718 are characterized by very high temperatures on the cutting edge of the insert, this is ...

Thread millprogram

{"Overall Length - Inch (L)":["3","3.5","4"],"Major Diameter - Inch":["0.0625","0.125","0.25","0.375","0.5","1"],"Number of Flutes":["4","5","6"],"Threads Per Inch":["27","18","14","11.5"],"Neck Length - Inch (L1)":["0.48","0.72"],"Diameter - Inch (D)":["0.223","0.302","0.381","0.459","0.617","0.737"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.407","0.611","0.786","0.957"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Thread Size - Inch":["1/16","1/8","1/4","3/8","1/2","1"],"Helix Angle - Degree":"11","Type":["3","4"],"Web Literature 1":"8002024CA-TP,28|8002024CA-TPT,31","Web Literature 3":"800384CA|80064CA|80062CA","Web Literature 4":"800390CA","Web Literature 2":"80061CA-V2","Brand":"A Brand","Short Description":"Advanced Performance One Pass Thread Mill","List Name":"AT-1 NPTF","Substrate":"Carbide","Product Overview":"Carbide, EgiAs Coating, NPTF","Surface Treatment":"EgiAs","Feature 3":"EgiAs Coating","Benefit 3":"For exceptional wear resistance","Benefit 4":"For high wear resistance and toughness","Notes":"For internal threads only","Benefit 1":"For reduced vibration","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Shank Tolerance":"h6","Web Video 1":"https://youtu.be/ladZnTkQl_E","Web Video 2":"https://youtu.be/ladZnTkQl_E","Web Video 3":"https://youtu.be/ladZnTkQl_E","Units":"Inch","Benefit 2":"Increases tool stability","Cast Iron":"K; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Type":"NPTF","Alloy Steels : 4140; 4340":"P; Best","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Cutting Direction":"RH","Helix Direction":"RH","Feature 2":"Right-Hand Cut & Left-Hand Helix Geometry","Full Description":"The A Brand AT-1 threadmill is designed with a left-hand helix for a small pitch diameter difference between the hole entry and the bottom of the hole, allowing a delay in gauge-out failure. Longer tool life can be achieved with elimination of “zero cutting” for correcting bending.","Product Category":"Thread Mills","Feature 4":"Ultra-Fine Grain Carbide","Feature 1":"Unequal Spacing / Variable Lead Flute","Diameter-Sizes":"0.223\" - 0.737\"","Flute-Sizes":"-","Neck-Sizes":"0.48\" - 0.72\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016631/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16631_-_NPTF_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016631/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16631_-_NPTF_-_Type_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016631/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16631_-_NPTF_-_Type_4"],"Friendly Name":"16631"}

{"Diameter - Metric (D)":["4.5","6","7.5","9.5","10","12","16","20"],"Number of Flutes":["4","5","6"],"Major Diameter - Metric":["6","8","10","12","14","16","20","24"],"Overall Length - Metric (L)":["60","65","70","85","95","105","120"],"Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Neck Length - Metric (L1)":["15","26","28"],"Pitch":["1","1.25","1.5","1.75","2","2.5","3"],"Length of Cut - Metric (Lc)":["13","17","17.5","21","22.5","26.3","30","34.5","34","42","42.5","50","51"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Type":["1","2"],"Helix Angle - Degree":"11","Web Literature 1":"8002024CA-TP,39|8002024CA-TPT,34","Web Literature 4":"800390CA","Substrate":"Carbide","Surface Treatment":"EXO","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Good","Thread Type":["M","MF"],"Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Thread Size - Metric":["M6","M8","M10","M12","M14","M16","M20","M24"],"Units":"Metric","Product Overview":"Metric, MJ, Helical Flute, EXO","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","Alloy Steels : 4140; 4340":"P; Best","High Carbon Steel : 1065":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Low Carbon Steel : 1010; 1018":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","List Name":"WXO-ST-PNC","Coolant Thru":"Yes","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Diameter-Sizes":"4.5mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"15mm - 28mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 120mm","Shank-Sizes":"6mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041150/Taps_-_Tap_-_EXOCARB_Oil_-_List_41150_-_Thread_Mills_-_Catalog"],"Friendly Name":"41150"}

202166 — Cold-working (work hardening) of metals is important for strengthening structural materials (eg, iron beams) and for making brittle, hard edges.

{"Major Diameter - Inch":["0.112","0.138","0.164","0.19","0.25","0.3125","0.375","0.5"],"Number of Flutes":"2","Neck Length - Inch (L1)":["0.311","0.385","0.437","0.526","0.489","0.675","0.625","0.819","0.771","0.969","0.896","1.269","1.175"],"Threads Per Inch":["40","32","24","20","28","18","16","13"],"Diameter - Inch (D)":["0.083","0.1","0.122","0.146","0.179","0.224","0.264","0.362"],"Length of Cut - Inch (Lc)":["0.125","0.156","0.208","0.25","0.179","0.278","0.313","0.385"],"Shank Diameter - Inch (d)":["0.25","0.375"],"Overall Length - Inch (L)":["2","3","3.5"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Feature 4":"2-Flute","Helix Angle - Degree":"30","Web Literature 1":"8002024CA-TP,31|8002024CA-TPT,33","Web Literature 2":"800319CA-V4","Web Literature 4":"800390CA","Brand":"A Brand","Short Description":"Advanced Performance End-Cutting Thread Mill for Non-ferrous Materials","List Name":"AT-2 R-SPEC","Substrate":"Carbide","Product Overview":"Carbide, Durorey Coating, End-Cutting Edge, Inch Sizes","Surface Treatment":"DLC-IGUSS","Feature 1":"DLC-IGUSS Coating","Feature 2":"End Cutting Edge","Notes":"For internal threads only","Benefit 4":"for wide chip room","Shank Tolerance":"h6","Benefit 2":"Helical drilling and threading can be done simultaneously","Web Video 1":"https://youtu.be/lK5CSk-uXnQ","Web Video 2":"https://youtu.be/lK5CSk-uXnQ","Web Video 3":"https://youtu.be/lK5CSk-uXnQ","Units":"Inch","Cutting Direction":"LH","Helix Direction":"LH","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Size - Number":["No. 4","No. 6","No. 8","No. 10"],"Benefit 3":"Prevents deflection of tool","Benefit 1":"prevents welding on the cutting edge","Full Description":"The high-efficiency thread mill AT-2 R-SPEC is engineered to dramatically reduce machining time in non-ferrous metal applications such as aluminum alloy by its continuous helical cutting ability, which combines drilling and threading into a single process.","Product Category":"Thread Mills","Thread Type":["UNC","UNF"],"Feature 3":"Unique Cutting Edge Shape","Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Thread Size - Inch":["1/4","5/16","3/8","1/2"],"Coolant Thru":"Yes","Diameter-Sizes":"0.083\" - 0.362\"","Flute-Sizes":"-","Neck-Sizes":"0.311\" - 1.269\"","Taper-Sizes":"-","Overall-Sizes":"2\" - 3.5\"","Shank-Sizes":"0.25\" - 0.375\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016647/End_Mills_-_End_Mill_-_A_Brand_AT-2_List_16647_-_AT-2_R-SPEC_-_Catalog"],"Friendly Name":"16647"}

{"Number of Flutes":"3","Major Diameter - Metric":["1","1.2","1.4","1.6","1.7","2","2.5","3","4","5"],"Overall Length - Metric (L)":["40","41"],"Shank Diameter - Metric (d)":["3","6"],"Pitch":["0.25","0.3","0.35","0.4","0.45","0.5","0.7","0.8"],"Neck Length - Metric (L1)":["2.75","3.25","3.8","4.35","4.85","4.4","5.6","6.5","8.7","10.8"],"Diameter - Metric (D)":["0.72","0.91","1.05","1.2","1.3","1.5","1.9","2.4","3.1","4"],"Length of Cut - Metric (Lc)":["0.26","0.31","0.36","1.2","1.35","1.5","2.1","2.4"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Angle - Degree":"11","Type":["5","6"],"Web Literature 1":"8002024CA-TP,34|8002024CA-TPT,35","Web Literature 2":"800257CA-V3|800291CA","Web Literature 4":"800390CA","Substrate":"Carbide","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For Internal threads only.","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Good","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Good","Thread Type":"M","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Thread Size - Metric":["M1","M1.2","M1.4","M1.6","M1.7","M2","M2.5","M3","M4","M5"],"Units":"Metric","Product Overview":"Metric, MJ, Helical Flute, EXO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Best","Titanium : 6AL4V (30HRC)":"S; Best","Surface Treatment":["Super Smooth","WXS"],"Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","List Name":"WH-VM-PNC","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Diameter-Sizes":"0.72mm - 4mm","Flute-Sizes":"-","Neck-Sizes":"2.75mm - 10.8mm","Taper-Sizes":"-","Overall-Sizes":"40mm - 41mm","Shank-Sizes":"3mm - 6mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041300/Taps_-_Tap_-_EXOCARB_Mini_-_List_41300_-_Thread_Mills_-_Type_6_-_Catalog"],"Friendly Name":"41300"}

{"Overall Length - Inch (L)":["3","3.5","5","5.5","6"],"Number of Flutes":["4","5","6"],"Major Diameter - Inch":["0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1"],"Threads Per Inch":["20","28","32","18","24","16","14","13","12","11","10","9","8"],"Neck Length - Inch (L1)":["0.7","0.68","0.625","0.889","0.833","0.75","1","0.958","0.875","1.308","1.2","1.178","1.5","1.389","1.333","1.636","1.458","1.9","1.75","1.7","2.222","2.071","1.95","2.5","2.334","2.2"],"Diameter - Inch (D)":["0.179","0.224","0.264","0.303","0.343","0.382","0.421","0.461","0.539","0.736"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.6","0.607086","0.562598","0.777559","0.749606","0.687795","0.875196","0.812598","1.071259","1","0.964173","1.153937","1.1","1.107086","1.333464","1.277559","1.249606","1.45433","1.388976","1.374409","1.7","1.62559","1.6","2","1.928346","1.85","2.25","2.166929","2.1"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Type":["1","2"],"Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1"],"Helix Angle - Degree":"11","Web Literature 1":"8002024CA-TP,25|8002024CA-TPT,31","Web Literature 3":"800384CA|80064CA|80062CA","Web Literature 4":"800390CA","Web Literature 2":"80061CA-V2","Brand":"A Brand","Short Description":"Advanced Performance One Pass Thread Mill","List Name":"AT-1","Substrate":"Carbide","Product Overview":"Carbide, EgiAs Coating, Inch Sizes","Surface Treatment":"EgiAs","Feature 3":"EgiAs Coating","Benefit 3":"For exceptional wear resistance","Benefit 4":"For high wear resistance and toughness","Notes":"For internal threads only","Benefit 1":"For reduced vibration","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Shank Tolerance":"h6","Web Video 1":"https://youtu.be/ladZnTkQl_E","Web Video 2":"https://youtu.be/ladZnTkQl_E","Web Video 3":"https://youtu.be/ladZnTkQl_E","Units":"Inch","Benefit 2":"Increases tool stability","Cast Iron":"K; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Alloy Steels : 4140; 4340":"P; Best","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Cutting Direction":"RH","Helix Direction":"RH","Feature 2":"Right-Hand Cut & Left-Hand Helix Geometry","Full Description":"The A Brand AT-1 threadmill is designed with a left-hand helix for a small pitch diameter difference between the hole entry and the bottom of the hole, allowing a delay in gauge-out failure. Longer tool life can be achieved with elimination of “zero cutting” for correcting bending.","Product Category":"Thread Mills","Feature 4":"Ultra-Fine Grain Carbide","Thread Type":["UNC","UNF","UNEF"],"Feature 1":"Unequal Spacing / Variable Lead Flute","Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Diameter-Sizes":"0.179\" - 0.736\"","Flute-Sizes":"-","Neck-Sizes":"0.625\" - 2.5\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 6\"","Shank-Sizes":"0.25\" - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016625/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16625_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016625/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16625_-_Type_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2016625/Taps_-_Thread_Mill_-_A_Brand_AT-1_-_List_16625_-_Type_4"],"Friendly Name":"16625"}

The flute is a member of a family of musical instruments in the woodwind group. Like all woodwinds, flutes are aerophones, producing sound with a vibrating ...

{"Number of Flutes":["3","4"],"Major Diameter - Inch":["0.19","0.216","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1"],"Threads Per Inch":["24","32","28","20","18","16","14","13","12","11","10","9","8"],"Neck Length - Inch (L1)":["0.437","0.374","0.358","0.449","0.429","0.783","0.752","1","0.945","1.091","0.406","0.598","0.571","1.142","1.098","1.417","1.445","1.547"],"Diameter - Inch (D)":["0.13","0.16","0.18","0.245","0.3","0.35","0.37","0.43","0.45","0.495","0.62","0.745","0.19","0.25","0.31","0.375"],"Shank Diameter - Inch (d)":["0.1875","0.25","0.3125","0.375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.374","0.331","0.323","0.402","0.394","0.5","0.594","0.583","0.713","0.701","0.768","0.75","0.917","0.89","1","0.945","1.201","1.126","1.335","1.358","1.626","1.583","0.469","0.563","0.752","0.551","0.535","0.72","0.874","1.071","1.051","1.079","1.098","1.39","1.453","1.5","1.701","1.689","2"],"Overall Length - Inch (L)":["2.5","3","4","4.5","5"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Type":["1","2"],"Helix Angle - Degree":"11-30","Web Literature 1":["8002024CA-TP,35|8002024CA-TPT,34","8002024CA-TP,36|8002024CA-TPT,34"],"Web Literature 4":"800390CA","Substrate":"Carbide","Surface Treatment":"EXO","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Units":"Inch","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Size - Number":["No. 10","No. 12"],"Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","List Name":"OT-SFT-PNGT","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","Thread Type":["UNC","UNF","UNEF","UNS"],"Product Overview":"UNC, UNF, UNEF, UNS, Helical Flute, EXO","Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1"],"Diameter-Sizes":"0.13\" - 0.745\"","Flute-Sizes":"-","Neck-Sizes":"0.358\" - 1.547\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 5\"","Shank-Sizes":"0.1875\" - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041000/Taps_-_Tap_-_EXOCARB_-_List_41000_-_Thread_Mills_-_Catalog"],"Friendly Name":"41000"}

{"Number of Flutes":"3","Major Diameter - Inch":["0.06","0.073","0.086","0.099","0.112","0.125","0.138","0.164"],"Neck Length - Inch (L1)":["0.162","0.196","0.198","0.189","0.22","0.248","0.272","0.307","0.354"],"Diameter - Inch (D)":["0.045","0.055","0.064","0.074","0.083","0.096","0.103","0.129"],"Threads Per Inch":["80","72","64","56","48","40","44","32","36"],"Shank Diameter - Inch (d)":["0.125","0.25"],"Length of Cut - Inch (Lc)":["0.013","0.014","0.016","0.054","0.047","0.063","0.075","0.068","0.094","0.083"],"Overall Length - Inch (L)":["1.625","1.661"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Angle - Degree":"11","Type":["5","6"],"Web Literature 1":"8002024CA-TP,33|8002024CA-TPT,35","Web Literature 2":"800257CA-V3","Web Literature 4":"800390CA","Substrate":"Carbide","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For Internal threads only.","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Good","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Units":"Inch","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Good","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Size - Number":["No. 0","No. 1","No. 2","No. 3","No. 4","No. 5","No. 6","No. 8"],"Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Best","Titanium : 6AL4V (30HRC)":"S; Best","Surface Treatment":["Super Smooth","WXS"],"Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","Product Overview":"UNC, UNF, UNEF, UNS, Helical Flute, EXO","Thread Type":["UNF","UNC"],"List Name":"WH-VM-PNC","Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Diameter-Sizes":"0.045\" - 0.129\"","Flute-Sizes":"-","Neck-Sizes":"0.162\" - 0.354\"","Taper-Sizes":"-","Overall-Sizes":"1.625\" - 1.661\"","Shank-Sizes":"0.125\" - 0.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2041200/Taps_-_Tap_-_EXOCARB_Mini_-_List_41200_-_Thread_Mills_-_Type_6_-_Catalog"],"Friendly Name":"41200"}

{"Number of Flutes":["3","4"],"Overall Length - Inch (L)":["3","4"],"Major Diameter - Inch":["0.0625","0.125","0.25","0.5","1","2.5","0.75","2"],"Threads Per Inch":["27","18","14","11.5","8"],"Neck Length - Inch (L1)":["0.44","1.04"],"Diameter - Inch (D)":["0.186","0.286","0.335","0.575","0.785","0.917"],"Length of Cut - Inch (Lc)":["0.409","0.61","0.787","0.957","1.358"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.625","1"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Thread Size - Inch":["1/16","1/8","1/4","1/2","1","2-1/2","3/4","2"],"Type":["3","4"],"Helix Angle - Degree":"30","Web Literature 1":"8002024CA-TP,41|8002024CA-TPT,34","Web Literature 4":"800390CA","Substrate":"Carbide","Surface Treatment":"EXO","Brand":"EXOCARB","Benefit 3":"For internal inch, metric and pipe threads","Notes":"For internal threads only","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Shank Tolerance":"h6","Short Description":"Ideal for Steels, Exotics and Difficult to Machine Materials","Benefit 2":"Improves wear resistance for extended tool life","Units":"Inch","Feature 3":"Inch, Metric and Pipe","Cast Iron":"K; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Thread Type":"NPTF","Product Overview":"NPTF, Helical Flute, EXO","Feature 1":"Optimized flute geometry","Feature 2":"OSG's EXO multi-layered TiAlN coating","List Name":"OT-SFT-PNGT NPTF","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Benefit 1":"Reduced cutting forces","Cutting Direction":"RH","Helix Direction":"RH","Full Description":"The newly expanded EXOCARB thread mills now includes longer lengths, miniature mills and coolant-fed thread mills. All utilizing OSG's premium sub-micrograin carbide for hardness, helical flutes for free cutting action and our EXO multi-layered coating for ultimate wear resistance and tool life.","Product Category":"Thread Mills","Diameter-Sizes":"0.186\" - 0.917\"","Flute-Sizes":"-","Neck-Sizes":"0.44\" - 1.04\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FThread%20Mills%2FList%2042001/Taps_-_Tap_-_EXOCARB_Pipe_-_List_42001_-_Thread_Mills_-_Catalog"],"Friendly Name":"42001"}