Ball Nose Milling Cutters, End Mills and Slot Drills - ball nose milling cutter insert

 2024-06-21 02:29:30

In conclusion, choosing between carbide and cobalt can be a difficult decision. Both materials have their own unique properties and advantages, making them suitable for different applications. Carbide is known for its hardness and resistance to wear and tear, while cobalt is valued for its strength and heat resistance. When making a decision, it is important to consider the specific application and requirements, as well as cost-effectiveness and availability. By understanding the benefits of each material, you can make an informed decision and achieve optimal performance and efficiency in your work.

As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

For starting taps at a right angle, some people put the tap in a drill press chuck, then manually turn the chuck to start the thread in a piece of metal on the table.

Just picking the bag up by the handle pulls the sides in enough that there's no risk of stuff falling out, so the zipper is not something I ever used on my other bag. A tool box would be quicker to close than doing up the zipper. And there's no practical way to lock this bag, so if you keep your toolbox locked, a bag is not for you.

They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

High-feed milling (HFM) is the solution for this problem. The tool works at elevated feed rates with modest speed or RPM, which reduces cycle time while ...

More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

For this hole, I just used the same block of wood that I used to start the die at a right angle now with the tap to get it started perpendicular. After a few turns in, with the threads engaging, I backed the tap out to take the block off so I could see what I'm doing. It's important to backup every half to quarter turn to break the chips, and for deeper holes, it helps to back out the tap and clean it up every few turns so it doesn't get clogged with chips. The tap can get so jammed with metal chips that it's impossible to go forwards or backwards without breaking it. This is especially important for deeper holes and smaller taps. With both threads cut, I can join the shaft with the strip of metal. This is more precise than could be done with welding, and stronger than any sort of glue. More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

I was approached by an agency working for Canadian Tire about doing a sponsored video to promote some of their new Maximum line of tools. They had a list of tools to chose from. One of the tools I picked was a tool bag. Why a tool bag? A router I bought a few years ago came with a bag instead of the usual moulded plastic case, and I started using that as a tool box. I find it much handier than an actual tool box. If you are one of those people that has a carefully arranged tool box where every hand plane, mallet, chisel and dovetail saw has its dedicated spot, then a tool bag is no substitute. But I just throw what I need in the bag and go. And for that, a tool bag makes much more sense than a box. The nice thing about a tool bag is that if there isn't much in it, it doesn't take up much space. But if you need to carry something bulky, it can take a lot. For example, I wouldn't carry a tool box big enough to throw something like a router in, but this bag takes it no problem. This bag also has all kinds of pockets all along the inside and outside for various tools. To be honest, the bag I have been using so far didn't have any pockets, and I didn't miss them. I'm sure pockets can be handy if you are organized, but I doubt I'll use them to their full potential. There's also a clip for a tape measure on the outside, and a pouch of sorts on the end. I suppose that could be useful for a water bottle, which I wouldn't normally throw in with the tools. And a zipper to close it all off. Just picking the bag up by the handle pulls the sides in enough that there's no risk of stuff falling out, so the zipper is not something I ever used on my other bag. A tool box would be quicker to close than doing up the zipper. And there's no practical way to lock this bag, so if you keep your toolbox locked, a bag is not for you. The bag also comes with a carrying strap. Another feature that could be handy but I doubt I'll use it much. But when I was a teenager working at my parents' housekeeping cottages, there was lots of carrying tools around for fixing this or that, so maybe in that context, the strap would be useful. I doubt I'll use all the features of this tool bag, but I think tool bags are definitely an improvement over tool boxes. Maximum tap and die set Many years ago I bought a large tap and die set on sale, at Canadian Tire. While I don't use it often, when I do use it, it comes in very handy. It's one of those things I wouldn't want to be without. I also figured it would be handy to have a set for my other shop, which is one of the reasons I picked this for review. This set goes to larger sizes than my other set. The set comes in a metal box, with two layers of plastic inserts. The dies are in the lower layer. To get at them, you have to lift the top layer out, but there isn't a very good place to grab it. The insert is made out of thin plastic, so pulling it out too many times may break it eventually. Another layer of clear plastic covers the dies, and if you leave that out, some of the dies may fall out when the box is closed. So getting at the die part of the set is a real nuisance. I may end up attaching a thin layer of plywood to the bottom of the top layer, with a pull tab to lift it out. That might make it easier and make the plastic last longer. What I like about newer tap and die sets like this one is that the dies are hexagonal, so they are easier to hold in the die holder and aren't liable to spin. My older tap and die set came with a die holder that had three prongs that you could adjust to line the die up with the shaft being cut, though it wasn't the most precisely formed, but it was useful to help get the die aligned straight when starting a thread. At right, you can see a thread I started with poor alignment. The thread just goes further off to the side the further I cut. I drilled a hole in a square block of wood to help me get the die started square to the shaft this time. Looking down in the tap as I'm cutting. It's important to back up every half a turn or so to break the chips, though this is much more critical for cutting inside threads with a tap than it is for a die. Now picking the corresponding tap to cut a thread in a hole. The set comes with a one page instruction sheet which also lists the correct drill size to use with each tap. Breaking a tap in a tap and die set is not at all uncommon, and the instruction sheet contains some useful information on using them. Being just one page, it only contains the useful information. I wish more "instructions" were like this. For starting taps at a right angle, some people put the tap in a drill press chuck, then manually turn the chuck to start the thread in a piece of metal on the table. For this hole, I just used the same block of wood that I used to start the die at a right angle now with the tap to get it started perpendicular. After a few turns in, with the threads engaging, I backed the tap out to take the block off so I could see what I'm doing. It's important to backup every half to quarter turn to break the chips, and for deeper holes, it helps to back out the tap and clean it up every few turns so it doesn't get clogged with chips. The tap can get so jammed with metal chips that it's impossible to go forwards or backwards without breaking it. This is especially important for deeper holes and smaller taps. With both threads cut, I can join the shaft with the strip of metal. This is more precise than could be done with welding, and stronger than any sort of glue. More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

Carbide Drill bits

I also figured it would be handy to have a set for my other shop, which is one of the reasons I picked this for review. This set goes to larger sizes than my other set.

Cobalt is used in a variety of industries, including the aerospace, medical, and automotive industries. This material is often used in the production of high-strength alloys and magnets, where its strength and heat resistance make it ideal for high-temperature applications. Cobalt is also used in the production of medical implants and prosthetics, where its biocompatibility and corrosion resistance are crucial.

Carbide is a compound of carbon and metal, typically tungsten, titanium, or tantalum. This material is known for its extreme hardness and resistance to wear and tear. Carbide is often used in cutting tools, dies, and inserts, where its hardness and toughness make it ideal for high-speed machining and heavy-duty applications.

When it comes to durability, carbide is often the material of choice. This material is extremely hard and tough, making it ideal for high-wear applications. Carbide can withstand high force and pressure without cracking or breaking, and it can maintain its sharpness for longer periods of time. Cobalt, on the other hand, is not as hard or tough as carbide, which means it may not be as durable in certain applications.

Properties like hardness, abrasion resistance, good strength and toughness, heat resistance, and corrosion resistance make carbide inserts useful for various ...

The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

One of the biggest advantages of carbide is its hardness. This material is extremely resistant to wear and tear, making it ideal for cutting tools and other high-wear applications. Carbide is also very tough, meaning it can withstand high force and pressure without breaking or cracking. Another advantage of carbide is its ability to maintain its sharpness for longer periods of time, reducing the need for frequent sharpening or replacement.

Cobalt vs carbide drill bitsfor steel

The set comes with a one page instruction sheet which also lists the correct drill size to use with each tap. Breaking a tap in a tap and die set is not at all uncommon, and the instruction sheet contains some useful information on using them. Being just one page, it only contains the useful information. I wish more "instructions" were like this. For starting taps at a right angle, some people put the tap in a drill press chuck, then manually turn the chuck to start the thread in a piece of metal on the table. For this hole, I just used the same block of wood that I used to start the die at a right angle now with the tap to get it started perpendicular. After a few turns in, with the threads engaging, I backed the tap out to take the block off so I could see what I'm doing. It's important to backup every half to quarter turn to break the chips, and for deeper holes, it helps to back out the tap and clean it up every few turns so it doesn't get clogged with chips. The tap can get so jammed with metal chips that it's impossible to go forwards or backwards without breaking it. This is especially important for deeper holes and smaller taps. With both threads cut, I can join the shaft with the strip of metal. This is more precise than could be done with welding, and stronger than any sort of glue. More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

Carbide is used in a variety of industries, including the metalworking, aerospace, and automotive industries. This material is often used in cutting tools, dies, and inserts, where its hardness and toughness make it ideal for high-speed machining and heavy-duty applications. Carbide is also used in the production of wear-resistant parts, such as bearings and nozzles.

I doubt I'll use all the features of this tool bag, but I think tool bags are definitely an improvement over tool boxes.

I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

It's important to backup every half to quarter turn to break the chips, and for deeper holes, it helps to back out the tap and clean it up every few turns so it doesn't get clogged with chips. The tap can get so jammed with metal chips that it's impossible to go forwards or backwards without breaking it. This is especially important for deeper holes and smaller taps.

The nice thing about a tool bag is that if there isn't much in it, it doesn't take up much space. But if you need to carry something bulky, it can take a lot.

Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

Low-priced China supplier. Custom tungsten carbide cold heading dies machining, forging die processing, Carbide inlaid HSS processing.

Breaking a tap in a tap and die set is not at all uncommon, and the instruction sheet contains some useful information on using them. Being just one page, it only contains the useful information. I wish more "instructions" were like this. For starting taps at a right angle, some people put the tap in a drill press chuck, then manually turn the chuck to start the thread in a piece of metal on the table. For this hole, I just used the same block of wood that I used to start the die at a right angle now with the tap to get it started perpendicular. After a few turns in, with the threads engaging, I backed the tap out to take the block off so I could see what I'm doing. It's important to backup every half to quarter turn to break the chips, and for deeper holes, it helps to back out the tap and clean it up every few turns so it doesn't get clogged with chips. The tap can get so jammed with metal chips that it's impossible to go forwards or backwards without breaking it. This is especially important for deeper holes and smaller taps. With both threads cut, I can join the shaft with the strip of metal. This is more precise than could be done with welding, and stronger than any sort of glue. More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

However, cobalt also has its disadvantages. One of the biggest drawbacks is its low hardness. Cobalt is not as hard as carbide, which means it may not be as resistant to wear and tear. Cobalt is also not as tough as carbide, which means it may not be able to withstand as much force or pressure.

Carbide DrillSet

When choosing between carbide and cobalt, it is important to consider the specific application and requirements. Carbide is ideal for high-wear applications where durability is crucial, while cobalt is ideal for high-temperature applications where heat resistance is crucial. Other factors to consider include cost-effectiveness, ease of machining, and availability.

However, cobalt does have its advantages in terms of durability. This material is very heat-resistant, which means it can withstand high temperatures without breaking down. Cobalt is also very ductile, which means it can be easily molded and shaped into various forms.

See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

There's also a clip for a tape measure on the outside, and a pouch of sorts on the end. I suppose that could be useful for a water bottle, which I wouldn't normally throw in with the tools.

Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

My older tap and die set came with a die holder that had three prongs that you could adjust to line the die up with the shaft being cut, though it wasn't the most precisely formed, but it was useful to help get the die aligned straight when starting a thread. At right, you can see a thread I started with poor alignment. The thread just goes further off to the side the further I cut.

What I like about newer tap and die sets like this one is that the dies are hexagonal, so they are easier to hold in the die holder and aren't liable to spin. My older tap and die set came with a die holder that had three prongs that you could adjust to line the die up with the shaft being cut, though it wasn't the most precisely formed, but it was useful to help get the die aligned straight when starting a thread. At right, you can see a thread I started with poor alignment. The thread just goes further off to the side the further I cut. I drilled a hole in a square block of wood to help me get the die started square to the shaft this time. Looking down in the tap as I'm cutting. It's important to back up every half a turn or so to break the chips, though this is much more critical for cutting inside threads with a tap than it is for a die. Now picking the corresponding tap to cut a thread in a hole. The set comes with a one page instruction sheet which also lists the correct drill size to use with each tap. Breaking a tap in a tap and die set is not at all uncommon, and the instruction sheet contains some useful information on using them. Being just one page, it only contains the useful information. I wish more "instructions" were like this. For starting taps at a right angle, some people put the tap in a drill press chuck, then manually turn the chuck to start the thread in a piece of metal on the table. For this hole, I just used the same block of wood that I used to start the die at a right angle now with the tap to get it started perpendicular. After a few turns in, with the threads engaging, I backed the tap out to take the block off so I could see what I'm doing. It's important to backup every half to quarter turn to break the chips, and for deeper holes, it helps to back out the tap and clean it up every few turns so it doesn't get clogged with chips. The tap can get so jammed with metal chips that it's impossible to go forwards or backwards without breaking it. This is especially important for deeper holes and smaller taps. With both threads cut, I can join the shaft with the strip of metal. This is more precise than could be done with welding, and stronger than any sort of glue. More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

When it comes to industrial tools, the choice between carbide and cobalt can be a tricky one. Both materials are popular for their durability and toughness, but they have their own unique properties that make them suitable for different applications. Carbide is known for its hardness and resistance to wear and tear, while cobalt is valued for its strength and heat resistance. The Battle of the Bits continues to rage on as manufacturers and industrial users weigh the pros and cons of each material. So, which one is the best choice for your needs? In this article, we’ll take an in-depth look at the similarities and differences between carbide and cobalt, so you can make an informed decision for your specific situation. Whether you’re a machinist, mechanic, or metalworker, understanding the benefits of each material is crucial to achieving optimal performance and efficiency in your work. Let’s dive in and discover which material reigns supreme in the Battle of the Bits.

DNMG Insert, TNMG Insert When making the choice of turning insert ... general turning or for finishing or roughing. Here, it is important to note ...

Tungaloy recently launched a revolutionised grade AH6225, which is undoubtably the best carbide grade in the market for turning Austenitic stainless steel.

Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

This bag also has all kinds of pockets all along the inside and outside for various tools. To be honest, the bag I have been using so far didn't have any pockets, and I didn't miss them. I'm sure pockets can be handy if you are organized, but I doubt I'll use them to their full potential.

Maximum tap and die set Many years ago I bought a large tap and die set on sale, at Canadian Tire. While I don't use it often, when I do use it, it comes in very handy. It's one of those things I wouldn't want to be without. I also figured it would be handy to have a set for my other shop, which is one of the reasons I picked this for review. This set goes to larger sizes than my other set. The set comes in a metal box, with two layers of plastic inserts. The dies are in the lower layer. To get at them, you have to lift the top layer out, but there isn't a very good place to grab it. The insert is made out of thin plastic, so pulling it out too many times may break it eventually. Another layer of clear plastic covers the dies, and if you leave that out, some of the dies may fall out when the box is closed. So getting at the die part of the set is a real nuisance. I may end up attaching a thin layer of plywood to the bottom of the top layer, with a pull tab to lift it out. That might make it easier and make the plastic last longer. What I like about newer tap and die sets like this one is that the dies are hexagonal, so they are easier to hold in the die holder and aren't liable to spin. My older tap and die set came with a die holder that had three prongs that you could adjust to line the die up with the shaft being cut, though it wasn't the most precisely formed, but it was useful to help get the die aligned straight when starting a thread. At right, you can see a thread I started with poor alignment. The thread just goes further off to the side the further I cut. I drilled a hole in a square block of wood to help me get the die started square to the shaft this time. Looking down in the tap as I'm cutting. It's important to back up every half a turn or so to break the chips, though this is much more critical for cutting inside threads with a tap than it is for a die. Now picking the corresponding tap to cut a thread in a hole. The set comes with a one page instruction sheet which also lists the correct drill size to use with each tap. Breaking a tap in a tap and die set is not at all uncommon, and the instruction sheet contains some useful information on using them. Being just one page, it only contains the useful information. I wish more "instructions" were like this. For starting taps at a right angle, some people put the tap in a drill press chuck, then manually turn the chuck to start the thread in a piece of metal on the table. For this hole, I just used the same block of wood that I used to start the die at a right angle now with the tap to get it started perpendicular. After a few turns in, with the threads engaging, I backed the tap out to take the block off so I could see what I'm doing. It's important to backup every half to quarter turn to break the chips, and for deeper holes, it helps to back out the tap and clean it up every few turns so it doesn't get clogged with chips. The tap can get so jammed with metal chips that it's impossible to go forwards or backwards without breaking it. This is especially important for deeper holes and smaller taps. With both threads cut, I can join the shaft with the strip of metal. This is more precise than could be done with welding, and stronger than any sort of glue. More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

With both threads cut, I can join the shaft with the strip of metal. This is more precise than could be done with welding, and stronger than any sort of glue. More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

Machining calculator apps: calculate cut settings based on job parameters. The Machining calculator apps are designed to help engineers and operators ...

Carbide vstitaniumdrill bits

Harding Steel, Inc. is a leading innovator in Mechanical and Automated Parking Systems.

Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

HSSvs cobalt drill bits

And a zipper to close it all off. Just picking the bag up by the handle pulls the sides in enough that there's no risk of stuff falling out, so the zipper is not something I ever used on my other bag. A tool box would be quicker to close than doing up the zipper. And there's no practical way to lock this bag, so if you keep your toolbox locked, a bag is not for you. The bag also comes with a carrying strap. Another feature that could be handy but I doubt I'll use it much. But when I was a teenager working at my parents' housekeeping cottages, there was lots of carrying tools around for fixing this or that, so maybe in that context, the strap would be useful. I doubt I'll use all the features of this tool bag, but I think tool bags are definitely an improvement over tool boxes. Maximum tap and die set Many years ago I bought a large tap and die set on sale, at Canadian Tire. While I don't use it often, when I do use it, it comes in very handy. It's one of those things I wouldn't want to be without. I also figured it would be handy to have a set for my other shop, which is one of the reasons I picked this for review. This set goes to larger sizes than my other set. The set comes in a metal box, with two layers of plastic inserts. The dies are in the lower layer. To get at them, you have to lift the top layer out, but there isn't a very good place to grab it. The insert is made out of thin plastic, so pulling it out too many times may break it eventually. Another layer of clear plastic covers the dies, and if you leave that out, some of the dies may fall out when the box is closed. So getting at the die part of the set is a real nuisance. I may end up attaching a thin layer of plywood to the bottom of the top layer, with a pull tab to lift it out. That might make it easier and make the plastic last longer. What I like about newer tap and die sets like this one is that the dies are hexagonal, so they are easier to hold in the die holder and aren't liable to spin. My older tap and die set came with a die holder that had three prongs that you could adjust to line the die up with the shaft being cut, though it wasn't the most precisely formed, but it was useful to help get the die aligned straight when starting a thread. At right, you can see a thread I started with poor alignment. The thread just goes further off to the side the further I cut. I drilled a hole in a square block of wood to help me get the die started square to the shaft this time. Looking down in the tap as I'm cutting. It's important to back up every half a turn or so to break the chips, though this is much more critical for cutting inside threads with a tap than it is for a die. Now picking the corresponding tap to cut a thread in a hole. The set comes with a one page instruction sheet which also lists the correct drill size to use with each tap. Breaking a tap in a tap and die set is not at all uncommon, and the instruction sheet contains some useful information on using them. Being just one page, it only contains the useful information. I wish more "instructions" were like this. For starting taps at a right angle, some people put the tap in a drill press chuck, then manually turn the chuck to start the thread in a piece of metal on the table. For this hole, I just used the same block of wood that I used to start the die at a right angle now with the tap to get it started perpendicular. After a few turns in, with the threads engaging, I backed the tap out to take the block off so I could see what I'm doing. It's important to backup every half to quarter turn to break the chips, and for deeper holes, it helps to back out the tap and clean it up every few turns so it doesn't get clogged with chips. The tap can get so jammed with metal chips that it's impossible to go forwards or backwards without breaking it. This is especially important for deeper holes and smaller taps. With both threads cut, I can join the shaft with the strip of metal. This is more precise than could be done with welding, and stronger than any sort of glue. More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

Article no.: 70344531 ; Article description. Designation: SX R1.50N-M3 CTCP335 CARBIDE GROOVING INSERT Description: for grooving and copy turning. very good chip ...

TungstenCarbide Drill Bits

Cobalt is known for its strength and heat resistance, making it ideal for high-temperature applications. This material is also very ductile, meaning it can be easily molded and shaped into various forms. Cobalt is also relatively inexpensive compared to other materials, making it a cost-effective option for many applications.

For example, I wouldn't carry a tool box big enough to throw something like a router in, but this bag takes it no problem. This bag also has all kinds of pockets all along the inside and outside for various tools. To be honest, the bag I have been using so far didn't have any pockets, and I didn't miss them. I'm sure pockets can be handy if you are organized, but I doubt I'll use them to their full potential. There's also a clip for a tape measure on the outside, and a pouch of sorts on the end. I suppose that could be useful for a water bottle, which I wouldn't normally throw in with the tools. And a zipper to close it all off. Just picking the bag up by the handle pulls the sides in enough that there's no risk of stuff falling out, so the zipper is not something I ever used on my other bag. A tool box would be quicker to close than doing up the zipper. And there's no practical way to lock this bag, so if you keep your toolbox locked, a bag is not for you. The bag also comes with a carrying strap. Another feature that could be handy but I doubt I'll use it much. But when I was a teenager working at my parents' housekeeping cottages, there was lots of carrying tools around for fixing this or that, so maybe in that context, the strap would be useful. I doubt I'll use all the features of this tool bag, but I think tool bags are definitely an improvement over tool boxes. Maximum tap and die set Many years ago I bought a large tap and die set on sale, at Canadian Tire. While I don't use it often, when I do use it, it comes in very handy. It's one of those things I wouldn't want to be without. I also figured it would be handy to have a set for my other shop, which is one of the reasons I picked this for review. This set goes to larger sizes than my other set. The set comes in a metal box, with two layers of plastic inserts. The dies are in the lower layer. To get at them, you have to lift the top layer out, but there isn't a very good place to grab it. The insert is made out of thin plastic, so pulling it out too many times may break it eventually. Another layer of clear plastic covers the dies, and if you leave that out, some of the dies may fall out when the box is closed. So getting at the die part of the set is a real nuisance. I may end up attaching a thin layer of plywood to the bottom of the top layer, with a pull tab to lift it out. That might make it easier and make the plastic last longer. What I like about newer tap and die sets like this one is that the dies are hexagonal, so they are easier to hold in the die holder and aren't liable to spin. My older tap and die set came with a die holder that had three prongs that you could adjust to line the die up with the shaft being cut, though it wasn't the most precisely formed, but it was useful to help get the die aligned straight when starting a thread. At right, you can see a thread I started with poor alignment. The thread just goes further off to the side the further I cut. I drilled a hole in a square block of wood to help me get the die started square to the shaft this time. Looking down in the tap as I'm cutting. It's important to back up every half a turn or so to break the chips, though this is much more critical for cutting inside threads with a tap than it is for a die. Now picking the corresponding tap to cut a thread in a hole. The set comes with a one page instruction sheet which also lists the correct drill size to use with each tap. Breaking a tap in a tap and die set is not at all uncommon, and the instruction sheet contains some useful information on using them. Being just one page, it only contains the useful information. I wish more "instructions" were like this. For starting taps at a right angle, some people put the tap in a drill press chuck, then manually turn the chuck to start the thread in a piece of metal on the table. For this hole, I just used the same block of wood that I used to start the die at a right angle now with the tap to get it started perpendicular. After a few turns in, with the threads engaging, I backed the tap out to take the block off so I could see what I'm doing. It's important to backup every half to quarter turn to break the chips, and for deeper holes, it helps to back out the tap and clean it up every few turns so it doesn't get clogged with chips. The tap can get so jammed with metal chips that it's impossible to go forwards or backwards without breaking it. This is especially important for deeper holes and smaller taps. With both threads cut, I can join the shaft with the strip of metal. This is more precise than could be done with welding, and stronger than any sort of glue. More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

When it comes to cost-effectiveness, cobalt is often the material of choice. This material is relatively inexpensive compared to other materials, making it a cost-effective option for many applications. Carbide, on the other hand, is more expensive than other materials, which means it may not be as cost-effective for some applications.

However, carbide also has its disadvantages. One of the biggest drawbacks is its brittleness. Carbide can crack or break under certain conditions, such as when exposed to high force or impact. Carbide is also more expensive than other materials, making it less cost-effective for some applications.

Tungstencarbide vstitaniumvs cobalt drill bits

Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

One of the tools I picked was a tool bag. Why a tool bag? A router I bought a few years ago came with a bag instead of the usual moulded plastic case, and I started using that as a tool box. I find it much handier than an actual tool box. If you are one of those people that has a carefully arranged tool box where every hand plane, mallet, chisel and dovetail saw has its dedicated spot, then a tool bag is no substitute. But I just throw what I need in the bag and go. And for that, a tool bag makes much more sense than a box. The nice thing about a tool bag is that if there isn't much in it, it doesn't take up much space. But if you need to carry something bulky, it can take a lot. For example, I wouldn't carry a tool box big enough to throw something like a router in, but this bag takes it no problem. This bag also has all kinds of pockets all along the inside and outside for various tools. To be honest, the bag I have been using so far didn't have any pockets, and I didn't miss them. I'm sure pockets can be handy if you are organized, but I doubt I'll use them to their full potential. There's also a clip for a tape measure on the outside, and a pouch of sorts on the end. I suppose that could be useful for a water bottle, which I wouldn't normally throw in with the tools. And a zipper to close it all off. Just picking the bag up by the handle pulls the sides in enough that there's no risk of stuff falling out, so the zipper is not something I ever used on my other bag. A tool box would be quicker to close than doing up the zipper. And there's no practical way to lock this bag, so if you keep your toolbox locked, a bag is not for you. The bag also comes with a carrying strap. Another feature that could be handy but I doubt I'll use it much. But when I was a teenager working at my parents' housekeeping cottages, there was lots of carrying tools around for fixing this or that, so maybe in that context, the strap would be useful. I doubt I'll use all the features of this tool bag, but I think tool bags are definitely an improvement over tool boxes. Maximum tap and die set Many years ago I bought a large tap and die set on sale, at Canadian Tire. While I don't use it often, when I do use it, it comes in very handy. It's one of those things I wouldn't want to be without. I also figured it would be handy to have a set for my other shop, which is one of the reasons I picked this for review. This set goes to larger sizes than my other set. The set comes in a metal box, with two layers of plastic inserts. The dies are in the lower layer. To get at them, you have to lift the top layer out, but there isn't a very good place to grab it. The insert is made out of thin plastic, so pulling it out too many times may break it eventually. Another layer of clear plastic covers the dies, and if you leave that out, some of the dies may fall out when the box is closed. So getting at the die part of the set is a real nuisance. I may end up attaching a thin layer of plywood to the bottom of the top layer, with a pull tab to lift it out. That might make it easier and make the plastic last longer. What I like about newer tap and die sets like this one is that the dies are hexagonal, so they are easier to hold in the die holder and aren't liable to spin. My older tap and die set came with a die holder that had three prongs that you could adjust to line the die up with the shaft being cut, though it wasn't the most precisely formed, but it was useful to help get the die aligned straight when starting a thread. At right, you can see a thread I started with poor alignment. The thread just goes further off to the side the further I cut. I drilled a hole in a square block of wood to help me get the die started square to the shaft this time. Looking down in the tap as I'm cutting. It's important to back up every half a turn or so to break the chips, though this is much more critical for cutting inside threads with a tap than it is for a die. Now picking the corresponding tap to cut a thread in a hole. The set comes with a one page instruction sheet which also lists the correct drill size to use with each tap. Breaking a tap in a tap and die set is not at all uncommon, and the instruction sheet contains some useful information on using them. Being just one page, it only contains the useful information. I wish more "instructions" were like this. For starting taps at a right angle, some people put the tap in a drill press chuck, then manually turn the chuck to start the thread in a piece of metal on the table. For this hole, I just used the same block of wood that I used to start the die at a right angle now with the tap to get it started perpendicular. After a few turns in, with the threads engaging, I backed the tap out to take the block off so I could see what I'm doing. It's important to backup every half to quarter turn to break the chips, and for deeper holes, it helps to back out the tap and clean it up every few turns so it doesn't get clogged with chips. The tap can get so jammed with metal chips that it's impossible to go forwards or backwards without breaking it. This is especially important for deeper holes and smaller taps. With both threads cut, I can join the shaft with the strip of metal. This is more precise than could be done with welding, and stronger than any sort of glue. More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

Cobalt is a pure metal that is valued for its strength and heat resistance. This material is often used in the aerospace and medical industries, where its ability to withstand extreme temperatures and pressure is crucial. Cobalt is also used in the production of high-strength alloys and magnets.

The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum

I may end up attaching a thin layer of plywood to the bottom of the top layer, with a pull tab to lift it out. That might make it easier and make the plastic last longer.

Carbide drill bitsfor hardened steel

The bag also comes with a carrying strap. Another feature that could be handy but I doubt I'll use it much. But when I was a teenager working at my parents' housekeeping cottages, there was lots of carrying tools around for fixing this or that, so maybe in that context, the strap would be useful. I doubt I'll use all the features of this tool bag, but I think tool bags are definitely an improvement over tool boxes. Maximum tap and die set Many years ago I bought a large tap and die set on sale, at Canadian Tire. While I don't use it often, when I do use it, it comes in very handy. It's one of those things I wouldn't want to be without. I also figured it would be handy to have a set for my other shop, which is one of the reasons I picked this for review. This set goes to larger sizes than my other set. The set comes in a metal box, with two layers of plastic inserts. The dies are in the lower layer. To get at them, you have to lift the top layer out, but there isn't a very good place to grab it. The insert is made out of thin plastic, so pulling it out too many times may break it eventually. Another layer of clear plastic covers the dies, and if you leave that out, some of the dies may fall out when the box is closed. So getting at the die part of the set is a real nuisance. I may end up attaching a thin layer of plywood to the bottom of the top layer, with a pull tab to lift it out. That might make it easier and make the plastic last longer. What I like about newer tap and die sets like this one is that the dies are hexagonal, so they are easier to hold in the die holder and aren't liable to spin. My older tap and die set came with a die holder that had three prongs that you could adjust to line the die up with the shaft being cut, though it wasn't the most precisely formed, but it was useful to help get the die aligned straight when starting a thread. At right, you can see a thread I started with poor alignment. The thread just goes further off to the side the further I cut. I drilled a hole in a square block of wood to help me get the die started square to the shaft this time. Looking down in the tap as I'm cutting. It's important to back up every half a turn or so to break the chips, though this is much more critical for cutting inside threads with a tap than it is for a die. Now picking the corresponding tap to cut a thread in a hole. The set comes with a one page instruction sheet which also lists the correct drill size to use with each tap. Breaking a tap in a tap and die set is not at all uncommon, and the instruction sheet contains some useful information on using them. Being just one page, it only contains the useful information. I wish more "instructions" were like this. For starting taps at a right angle, some people put the tap in a drill press chuck, then manually turn the chuck to start the thread in a piece of metal on the table. For this hole, I just used the same block of wood that I used to start the die at a right angle now with the tap to get it started perpendicular. After a few turns in, with the threads engaging, I backed the tap out to take the block off so I could see what I'm doing. It's important to backup every half to quarter turn to break the chips, and for deeper holes, it helps to back out the tap and clean it up every few turns so it doesn't get clogged with chips. The tap can get so jammed with metal chips that it's impossible to go forwards or backwards without breaking it. This is especially important for deeper holes and smaller taps. With both threads cut, I can join the shaft with the strip of metal. This is more precise than could be done with welding, and stronger than any sort of glue. More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

2021716 — Interrupted thread pipe taps: This type of pipe tap has a tooth removed on each cutting edge to increase chip flow and cut down on tapping ...

The set comes in a metal box, with two layers of plastic inserts. The dies are in the lower layer. To get at them, you have to lift the top layer out, but there isn't a very good place to grab it. The insert is made out of thin plastic, so pulling it out too many times may break it eventually. Another layer of clear plastic covers the dies, and if you leave that out, some of the dies may fall out when the box is closed. So getting at the die part of the set is a real nuisance. I may end up attaching a thin layer of plywood to the bottom of the top layer, with a pull tab to lift it out. That might make it easier and make the plastic last longer. What I like about newer tap and die sets like this one is that the dies are hexagonal, so they are easier to hold in the die holder and aren't liable to spin. My older tap and die set came with a die holder that had three prongs that you could adjust to line the die up with the shaft being cut, though it wasn't the most precisely formed, but it was useful to help get the die aligned straight when starting a thread. At right, you can see a thread I started with poor alignment. The thread just goes further off to the side the further I cut. I drilled a hole in a square block of wood to help me get the die started square to the shaft this time. Looking down in the tap as I'm cutting. It's important to back up every half a turn or so to break the chips, though this is much more critical for cutting inside threads with a tap than it is for a die. Now picking the corresponding tap to cut a thread in a hole. The set comes with a one page instruction sheet which also lists the correct drill size to use with each tap. Breaking a tap in a tap and die set is not at all uncommon, and the instruction sheet contains some useful information on using them. Being just one page, it only contains the useful information. I wish more "instructions" were like this. For starting taps at a right angle, some people put the tap in a drill press chuck, then manually turn the chuck to start the thread in a piece of metal on the table. For this hole, I just used the same block of wood that I used to start the die at a right angle now with the tap to get it started perpendicular. After a few turns in, with the threads engaging, I backed the tap out to take the block off so I could see what I'm doing. It's important to backup every half to quarter turn to break the chips, and for deeper holes, it helps to back out the tap and clean it up every few turns so it doesn't get clogged with chips. The tap can get so jammed with metal chips that it's impossible to go forwards or backwards without breaking it. This is especially important for deeper holes and smaller taps. With both threads cut, I can join the shaft with the strip of metal. This is more precise than could be done with welding, and stronger than any sort of glue. More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

A steel bar, commonly referred to as a "steel", but also referred to as a tone bar, slide bar, guitar slide, slide, or bottleneck, is a smooth hard object ...

Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues.

Another layer of clear plastic covers the dies, and if you leave that out, some of the dies may fall out when the box is closed. So getting at the die part of the set is a real nuisance. I may end up attaching a thin layer of plywood to the bottom of the top layer, with a pull tab to lift it out. That might make it easier and make the plastic last longer. What I like about newer tap and die sets like this one is that the dies are hexagonal, so they are easier to hold in the die holder and aren't liable to spin. My older tap and die set came with a die holder that had three prongs that you could adjust to line the die up with the shaft being cut, though it wasn't the most precisely formed, but it was useful to help get the die aligned straight when starting a thread. At right, you can see a thread I started with poor alignment. The thread just goes further off to the side the further I cut. I drilled a hole in a square block of wood to help me get the die started square to the shaft this time. Looking down in the tap as I'm cutting. It's important to back up every half a turn or so to break the chips, though this is much more critical for cutting inside threads with a tap than it is for a die. Now picking the corresponding tap to cut a thread in a hole. The set comes with a one page instruction sheet which also lists the correct drill size to use with each tap. Breaking a tap in a tap and die set is not at all uncommon, and the instruction sheet contains some useful information on using them. Being just one page, it only contains the useful information. I wish more "instructions" were like this. For starting taps at a right angle, some people put the tap in a drill press chuck, then manually turn the chuck to start the thread in a piece of metal on the table. For this hole, I just used the same block of wood that I used to start the die at a right angle now with the tap to get it started perpendicular. After a few turns in, with the threads engaging, I backed the tap out to take the block off so I could see what I'm doing. It's important to backup every half to quarter turn to break the chips, and for deeper holes, it helps to back out the tap and clean it up every few turns so it doesn't get clogged with chips. The tap can get so jammed with metal chips that it's impossible to go forwards or backwards without breaking it. This is especially important for deeper holes and smaller taps. With both threads cut, I can join the shaft with the strip of metal. This is more precise than could be done with welding, and stronger than any sort of glue. More thoughts on Canadian Tire and sponsored videos For those not from Canada, "Canadian Tire" is a Canadian hardware store chain. that focuses on hardware, house wares and automotive products. They also sell tires, but not lumber. They have their "coupon" currency, known as "Canadian tire money" As much as I like buying tools from Canadian Tire, I figure I should address this point: You can buy some real junk from Canadian Tire. Once or twice I've seen an item or two that I saw in the flyer and wanted to buy it, but just holding it in my hand in the store I concluded that the tool was not of sufficient quality to be useful. This is much less of an issue with their Mastercraft and Maximum line of tools because they stand behind those tools and, in my experience, they are very good about replacing anything that's defective. For instance, I found the metal on this die holder on my old set had turned very britle more than ten years after I bought it (presumably faulty metal), and they replaced it no questions asked. Another time, many years ago, I bought a hammer on sale at 75% off for $4. I bent the handle while pulling nails with it (kind of an abuse of the hammer). I figured no harm in trying to bring it back. They didn't have that hammer in stock, so they gave me store credit for the full purchase price of the hammer. Sweet deal! :) Canadian Tire has some substantial discounts on items from time to time, and when a good sale is on, the items are often an excellent deal. My drill press (they no longer sell that one), and my thickness planer were bought at 50% off. I also bought three of their routers. They aren't the best routers, but at $100 to $120 on sale for an interchangeable base, 1/2" collet router, well worth it. Other tools I bought were a 1"x30" strip sander, an "oscillating tool" and a right angle drill, plus quite a few hand tools. Another interesting Canadian Tire find is this oddball adjustable C-clamp. It was on clearance at the time I bought it. It makes a great hold-down for my slot mortising machine. I wish I could buy another one just like it. Required disclaimer Although I was compensated for my participation, the views and opinions expressed herein represent my own and not those of Canadian Tire corporation or any other party and do not constitute financial, legal or other advice The MAXIMUM line of tools is the new premium Canadian Tire store brand of tools, sold exclusively at Canadian Tire. www.canadiantire.ca/maximum This video has been a long time in the making. Daniel from the agency handling this first contacted me at the beginning of March, but there has been a several delays for this and that reason. I think the core of the problem is that big corporations like Canadian Tire and YouTubers like me occupy entirely different worlds. Big corporation have lawyers and legal agreements and are used to dealing with other companies that work the same way. And they are probably used to having more control over the messaging on media campaigns. I actually called it quits on this one more than once, but Daniel was very persistent in terms of working things out with both sides (I imagine it took quite a bit of back and forth with Canadian Tire as well). Kudos to him. It also gives me respect for YouTubers who do a lot of sponsored videos. It's a lot of work behind the scenes! Viewer attention is slowly shifting from TV to YouTube, and big personalities with big egos are popular on YouTube. It's just so much more interesting to watch than corporate controlled TV and commercials. And the best way to reach the YouTube audience is to work with popular YouTubers. But I guess it takes some courage to involve a loose cannon like me to say something about your products. No wonder most of the comapnies sponsoring YouTube creators are younger, smaller companies with much less at stake. There are others YouTubers who are more used to dealing with corporations, but they wanted to deal with Canadians for this campaign, which cut down on who to work with. The changing media landscape puts big companies in a tricky position. It will be interesting how this develops over the coming years. They also sent me a table saw, which I'll also be doing a review on as part of this deal, though that will have to wait a few weeks until after my vacation. I'm not sure about doing other sponsored videos in the future. It's a lot of back and forth, and also kind of a conflict of interest on my part. More about the maximum line of tools at: www.canadiantire.ca/maximum More references to "Canadian tire" on woodgears.ca. Update: On examining this table saw, I realized I could not do a sponsored review of it, so did a review of their brushless cordless drill instead. Then, much later, did a un-sponsored revew of the maximum table saw, pointing out some of its issues. Other Canadian YouTube woodworking channels: John Heisz, Alain Vaillancourt, Words N wood, The Samurai Carpenter, Jack Houweling, Wooden Tool Man, Toolify, Canadian woodworks See also: Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

Advantages of a brushless cordless drill Delta tenon jig review LED vs. CFcolour spectrum Back to my woodworking website.

If you are one of those people that has a carefully arranged tool box where every hand plane, mallet, chisel and dovetail saw has its dedicated spot, then a tool bag is no substitute. But I just throw what I need in the bag and go. And for that, a tool bag makes much more sense than a box.

However, carbide does have its advantages in terms of cost-effectiveness. This material can maintain its sharpness for longer periods of time, reducing the need for frequent sharpening or replacement. This can ultimately save money in the long run.

Looking down in the tap as I'm cutting. It's important to back up every half a turn or so to break the chips, though this is much more critical for cutting inside threads with a tap than it is for a die.