The Promax Series US007 4 Flute Solid Carbide Universal High Performance End Mill is available in inch measurements and is a high performance 4 flute solid carbide end mill available in both square end or corner radii options. Cut…

This Garant Master Alu PickPocket HPC German Solid Carbide Roughing End Mill is available in metric sizes and designed for roughing and finishing. With up to 2 × D into solid material at very high feed rates and smooth cutti…

External ChamferTool

This Garant Diabolo German Solid Carbide Milling Cutter HPC TiAlN is available in metric sizes and offers special geometry, coating and carbide milling, specifically designed for hard machining. Application:For profile milling as …

Note: This cutter works best in MDF, HDF or plywood with a melamine facing. We do not recommended it for hardwood veneer plywood, where the high cutting speed of a traditional woodworking router and chamfer bit with pilot bearing will provide a superior result.

The Parf Guide System relies on the fine tolerance fit between the dog holes and the dogs—neither too tight or too loose. Changes in humidity can make it difficult to insert or remove 20mm dogs. Machined from stainless steel, this UJK Combined Chamfer & Reamer Tool does two jobs at once.

Chamfering tool forMetal

This Holex German Roughing End Mill is available in metric sizes, features center cutting teeth for plunging, a relief ground fine pitch knuckle form profile with a TiAlN coating. Coating: TiAlNTool Material: HSS Co8Standard: DI…

45 degree Chamfer plane

After the reamer, the chamfer tool comes into action. It cuts a neat, shallow chamfer around the top of the dog hole. This chamfer allows full use of our Power-Loc or Smart Connect Bench Connecting Dogs, as well as Parf Super Dogs or any other 20mm dog that utilizes a lip. In addition, by removing the sharp edge around the hole, it prevents damage from repeated insertion of dogs, clamps and other accessories. The chamfer features a solid tungsten carbide cutter with four adjustable cutting sides. If it ever gets dull, which is unlikely, you can always rotate the carbide insert to another side.

Version: Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.Lengths similar to DIN 6527 long. Tool material: Solid car…

This SGS Series 43 S-CARB Solid Carbide End Mill is available in inch measurements and is a 3 flute, solid carbide square end mill designed for high performance machining in non-ferrous work piece materials. This milling cutt…

Chamfering Tool forDrill

Hoffmann Group USA offers a wide variety of end mills in both HSS and solid carbide, perfect for precision metal cutting.

As with all UJK products, it’s perfect. I bought to accompany the UJK Parf Guide System, which works unbelievably well too. After making the grid, I put shellac over top and inevitably it got down into the dogholes. Clearing out the holes, as well as adding the chamfer allows accessories to work the way they are supposed. I can’t say enough about the IJK products and this will not be the last product I purchase from them.

There’s something to be said for having the right tools for the job. This little gem expedites a process that otherwise is quite inexact and only 25% as thorough. The fact that it creates a perfect little chamfer AND cleans the dog hole makes it much more applicable and useful than any standard router bit.

Chamfer Plane

Version: For roughing. Special profile for machining non-ferrous metals. DLC Coating. Advantage: Optimised flute form, eccentric relief ground, generous chip spaces.Up to 2 × D into solid material at very high feed rates a…

This YG Tools HSS-Co 8% 4 Flute Center Cutting End Mill is TiAlN coated and recommended for pocketing, trace milling, cam milling, die sinking and slotting.

I made a multi-function table from a roller toolbox. I used a CNC to interpolate the 20mm diameter 92 mm spaced hole pattern. This tool quickly gave me precise final bores with the included chamfer.

Handheld chamferTool

ChamferTool

The SGS Z-CARB HPR series Z5 Solid Carbide End Mill is available in inch measurements and is a 5 flute solid carbide roughing end mill, designed with the ideal balance of helix, indexing, flute depth, rake and relief to achieve hi…

Pneumatic ChamferTool

This Garant Master INOX German Solid Carbide Milling Cutter HPC TPC TiAlN is available in metric sizes and is designed for roughing and finishing.The HPC German end mill with newly developed high-performance coating is designed fo…

I used the UJK chamfer and reamer tool on a few of the holes that I had recently drilled with the parf guide 2. Previous to using the reamer tool the 20 mm dogs that I have, fit perfectly with virtually no slop. After using the reamer tool, I found that the same 20 mm dogs had a small amount of slop in them. This will definitely introduce a small amount of inaccuracy in anything that I put into those 20 mm holes. I like the chamfer part of the tool, but not happy with the reamer portion.

This Garant German Solid Carbide End Mill MTC is available in metric sizes with the latest generation of DLC coating sp2. This Solid Carbide German End mill offers eccentric relief ground, additional polish ground in the flutes fo…

This 2-in-1 tool featuring a 10mm hexagonal shank can be used in your favorite cordless drill chuck (use at slow speed). The reamer portion has a gentle lead in and four cutting flutes to ream the holes to a precise size. With this woodworking multi-tool, your 20mm dogs will fit snugly without wobble yet can still be removed without difficulty.

This Holex German Solid Carbide End Mill in metric sizes offers eccentric relief ground, additional finish ground in the flutes for outstanding chip evacuation in long-chipping aluminum workpieces in an uncoated solid carbide slot…

This Holex German Multi-Flute End Mill offers eccentric relief ground with a TiAlN coating and HSS-Co8 tool material in multiple metric sizes. Technical Data: Coating: TiAlNTool Material: HSS Co 8Standard: DIN 844 BType: NThrough …

This Holex Solid Carbide End Mill is a TiAlN coated, solid carbide end mill, available in metric sizes, that offers an eccentric relief ground without a 45° cutting edge chamfer. Technical Data: Coating: TiAlN Tool material…

The Promax Series US556 5 Flute Solid Carbide Universal High Performance End Mills are available in inch measurements and are a high performance 5 flute solid carbide end mill available in both square end options and with cor…

This SGS Series 1 Solid Carbide End Mill is available in Inch Measurements and is a 4 flute, solid carbide square end mill with Ti-NAMITE-A coating for applications in a wide range of work place materials.   WARNING: This pr…