Image

It’s also recommended that you use a shop vac during cutting as cut strings of the foam tend to wrap around the mill. And use conventional cutting, not climb cutting.

Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

There are a few issues to consider, like how to clamp your workpiece to the table (use not-too-aggressive double-sided tape) and what end mill to use (you can get away with a standard mill, but one specialized for use on plastic and foam works best).

With these few considerations, you can achieve a reasonable fit and finish to EVA foam cut on a router.

Image

Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: CircuitPython Comes to the ESP32-P4, Emulating Arm on RISC-V, and Much More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandardsAdafruit is on Mastodon, join in! adafruit.com/mastodonStop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!Join us every Wednesday night at 8pm ET for Ask an Engineer!Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discordCircuitPython – The easiest way to program microcontrollers – CircuitPython.org

EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — Adafruit New Products this Week: Featuring Adafruit NeoPixel Shape Strands

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!

Image

Can you successful cut EVA foam on a CNC machine? That’s the question they wanted to answer at Carbide 3D. The answer is, yes, yes you can. There are a few issues to consider, like how to clamp your workpiece to the table (use not-too-aggressive double-sided tape) and what end mill to use (you can get away with a standard mill, but one specialized for use on plastic and foam works best). It’s also recommended that you use a shop vac during cutting as cut strings of the foam tend to wrap around the mill. And use conventional cutting, not climb cutting. With these few considerations, you can achieve a reasonable fit and finish to EVA foam cut on a router.

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.