Blue Ball Machine Co. | Homepage | Blue Ball, PA - ball machining
The 29.0417 series from Karnasch is a diamond coated carbide v.r-style compression tool with air cooling channels. Diameters range from 6-12mm and the compression geometry prevents delamination on upp...
SingleAngleMillingCutter
The 29.0417 series from Karnasch is a diamond coated carbide v.r-style compression tool with air cooling channels. Diameters range from 6-12mm and the compression geometry prevents delamination on upp...
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
Harvey ToolDouble AngleShankcutter
The GUF39 series from YG-1 is a diamond coated carbide corner radius end mill. Diameters range from 6-12mm and this comes with a 15° helix. These are suitable for use on For Carbon Fibre, Glass Rei...
The 29.0412 series from Karnasch is a diamond coated carbide v-style compression tool. Diameters range from 6-16mm and the compression geometry prevents delamination on upper and lower edges in fibre-...
The 11.6001 series from Karnasch is a Uncoated carbide fibreglass router. These routers are for contouring, grooving, drilling of a wide range of GFK, CFK, fiberglass reinforced plastics, as well as M...
The 29.0412 series from Karnasch is a diamond coated carbide v-style compression tool. Diameters range from 6-16mm and the compression geometry prevents delamination on upper and lower edges in fibre-...
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
60 degreeDouble Angle Cutter
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
The 29.0412 series from Karnasch is a diamond coated carbide v-style compression tool. Diameters range from 6-16mm and the compression geometry prevents delamination on upper and lower edges in fibre-...
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
30 degreeDouble Angle Cutter
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
CarbideDouble Angle Cutter
The 11.6001 series from Karnasch is a Uncoated carbide fibreglass router. These routers are for contouring, grooving, drilling of a wide range of GFK, CFK, fiberglass reinforced plastics, as well as M...
The 29.0417 series from Karnasch is a diamond coated carbide v.r-style compression tool with air cooling channels. Diameters range from 6-12mm and the compression geometry prevents delamination on upp...
The GUF39 series from YG-1 is a diamond coated carbide corner radius end mill. Diameters range from 6-12mm and this comes with a 15° helix. These are suitable for use on For Carbon Fibre, Glass Rei...
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...
Double Angle Cutter90 degree
The 29.0416 series from Karnasch is a diamond coated carbide v.r-style compression tool. Diameters range from 6-12mm and the compression geometry prevents delamination on upper and lower edges in fibr...
Your account number, or Customer ID can be found on any Pick Ticket (Packing List) or Invoice. Or please contact customer service at 1-800-MALLORY, and we will be happy to look it up for you.
18581906093