Singh, G., Teli, M., Samanta, A., Singh, R.: Finite element modeling of laser-assisted machining of AISI D2 tool steel. Mater. Manuf. Process. 28, 443–448 (2013). https://doi.org/10.1080/10426914.2012.700160

Image

Kalantari, O., Fallah, M.M., Jafarian, F.: Surface integrity in laser-assisted machining of Ti6Al4V. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. December, 1–8 (2020). https://doi.org/10.1177/0954406220978255

Aluminium6061

Gupta, M.K., Mia, M., Singh, G.R., Pimenov, D.Y., Sarikaya, M., Sharma, V.S.: Hybrid cooling-lubrication strategies to improve surface topography and tool wear in sustainable turning of Al 7075-T6 alloy. Int. J. Adv. Manuf. Technol. 101, 55–69 (2019). https://doi.org/10.1007/s00170-018-2870-4

Nadim, N., Shams, O.A., Chandratilleke, T.T., Pramanik, A.: Preheating and thermal behaviour of a rotating cylindrical workpiece in laser-assisted machining. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 234, 559–570 (2019). https://doi.org/10.1177/0954405419863597

Ajeet Vasant, J., Gopi, G., Jegaraj, J.R., J., Ramesh Kumar, K., Kuppan, P., Oyyaravelu, R.: Finite element simulation and experimental validation of laser assisted machining of Inconel 718. Mater. Today Proc. 5, 13637–13649 (2018). https://doi.org/10.1016/j.matpr.2018.02.361

Bayat, M., Amini, S., Hadidi, M.: Effect of ultrasonic-assisted turning on geometrical tolerances in Al 2024-T6. Mater. Manuf. Process. 1–12 (2021). https://doi.org/10.1080/10426914.2021.1926496

Recently I found myself with the issue of needing to chamfer a part feature, but I couldn’t reach it with the traditional chamfering approach.

Machinabilityof aluminum alloys

Sun, S., Brandt, M., Dargusch, M.S.: Thermally enhanced machining of hard-to-machine materials-a review. Int. J. Mach. Tools Manuf. 50, 663–680 (2010). https://doi.org/10.1016/j.ijmachtools.2010.04.008

First challenge is finding a backside chamfering tool which fits your part and has adequate reach. I am using Iscar’s MultiMaster upper and bottom chamfering tools (MM HDF100-090-2T05). You can use whatever tool you want, but check the following:

Azhdari Tadavani, S., Shoja Razavi, R., Vafaei, R.: Pulsed laser-assisted machining of Inconel 718 superalloy. Opt. Laser Technol. 87, 72–78 (2017). https://doi.org/10.1016/j.optlastec.2016.07.020

Wang, Y., Yang, L.J., Wang, N.J.: An investigation of laser-assisted machining of Al2O3 particle reinforced aluminum matrix composite. J. Mater. Process. Technol. 129, 268–272 (2002). https://doi.org/10.1016/S0924-0136(02)00616-7

AluminummachinabilityChart

Bejjani, R., Shi, B., Attia, H., Balazinski, M.: Laser assisted turning of titanium metal matrix composite. CIRP Ann. - Manuf. Technol. 60, 61–64 (2011). https://doi.org/10.1016/j.cirp.2011.03.086

Uddin, G.M., Joyia, F.M., Ghufran, M., Khan, S.A., Raza, M.A., Faisal, M., Arafat, S.M., Zubair, S.W.H., Jawad, M., Zafar, M.Q., Irfan, M., Waseem, B., Chaudhry, I.A., Zeid, I.: Comparative performance analysis of cemented carbide, TiN, TiAlN, and PCD coated inserts in dry machining of Al 2024 alloy. Int. J. Adv. Manuf. Technol. 112, 1461–1481 (2021). https://doi.org/10.1007/s00170-020-06315-5

Machinabilityof materials

Song, H., Li, J., Dan, J., Ren, G., Xiao, J., Xu, J.: Experimental analysis and evaluation of the cutting performance of tools in laser-assisted machining of fused silica. Precis. Eng. 56, 191–202 (2019). https://doi.org/10.1016/j.precisioneng.2018.11.014

Jebaraj, M., Kumar, M.P.: Effect of cryogenic CO2 and LN2 coolants in milling of aluminum alloy. Mater. Manuf. Process. 34, 511–520 (2019). https://doi.org/10.1080/10426914.2018.1532591

Skvarenina, S., Shin, Y.C.: Laser-assisted machining of compacted graphite iron. Int. J. Mach. Tools Manuf. 46, 7–17 (2006). https://doi.org/10.1016/j.ijmachtools.2005.04.013

Braham-Bouchnak, T., Germain, G., Morel, A., Lebrun, J.L.: The influence of laser assistance on the machinability of the titanium alloy Ti555-3. Int. J. Adv. Manuf. Technol. 68, 2471–2481 (2013). https://doi.org/10.1007/s00170-013-4855-7

Bestaluminiumfor machining

Now here is the clever bit, to get Fusion to recognize the tool as a back chamfer tool we need to define the tool compensation point. Normally, this point is the revolves centerline at the lowest Z height. But we don’t want that so we need to tell Fusion where we want to compensate the tool point.

Germain, G., Dal Santo, P., Lebrun, J.L.: Comprehension of chip formation in laser assisted machining. Int. J. Mach. Tools Manuf. 51, 230–238 (2011). https://doi.org/10.1016/j.ijmachtools.2010.11.006

Masood, S.H., Armitage, K., Brandt, M.: An experimental study of laser-assisted machining of hard-to-wear white cast iron. Int. J. Mach. Tools Manuf. 51, 450–456 (2011). https://doi.org/10.1016/j.ijmachtools.2011.02.001

Zhai, C., Xu, J., Li, Y., Hou, Y., Yuan, S., Liu, Q., Wang, X.: The study on surface integrity on laser-assisted turning of SiCp/2024Al. Int. J. Optomechatronics. 14, 29–43 (2020). https://doi.org/10.1080/15599612.2020.1789251

Ren, G., Song, H., Dan, J., Li, J., Pan, P., Yang, Z., Xiao, J., Xu, J.: Thermal analysis and machinability for laser-assisted machining of fused silica. Int. J. Heat Mass Transf. 148, 119078 (2020). https://doi.org/10.1016/j.ijheatmasstransfer.2019.119078

Kim, T.W., Lee, C.M.: Determination of the machining parameters of nickel-based alloys by high-power diode laser. Int. J. Precis. Eng. Manuf. 16, 309–314 (2015). https://doi.org/10.1007/s12541-015-0041-1

Tantalummachinability

Dandekar, C.R., Shin, Y.C.: Experimental evaluation of laser-assisted machining of silicon carbide particle-reinforced aluminum matrix composites. Int. J. Adv. Manuf. Technol. 66, 1603–1610 (2013). https://doi.org/10.1007/s00170-012-4443-2

Venkatesan, K., Ramanujam, R.: Improvement of machinability using laser-aided hybrid machining for Inconel 718 alloy. Mater. Manuf. Process. 31, 1825–1835 (2016). https://doi.org/10.1080/10426914.2015.1117626

Wei, C., Guo, W., Pratomo, E.S., Li, Q., Wang, D., Whitehead, D., Li, L.: High speed, high power density laser-assisted machining of Al-SiC metal matrix composite with significant increase in productivity and surface quality. J. Mater. Process. Technol. 285, 116784 (2020). https://doi.org/10.1016/j.jmatprotec.2020.116784

Whatever tool you’re using you need to bring it into Fusion360. Iscar makes it very easy as they have files package for every tool. If your tool of choice doesn’t have a 2D file, you can always draw it from scratch using provided dimensions. You can also setup a parametric template to use in the future if you’re so inclined.

Some caveats however, if your tool diameter is very close to the minimum cutting radius be sure to use feed optimization option. If your tool diameter is also close to the minimum cutting radius, avoid steep Z height changes along 3D contours. You get a “step” in the tool path and may cause gouging. Additionally, if the solid model has the chamfers modeled in, you’ll need to create another form tool with the compensation point at the lower cutting edge.

Santos, M.C., Machado, A.R., Sales, W.F., Barrozo, M.A.S., Ezugwu, E.O.: Machining of aluminum alloys: a review. Int. J. Adv. Manuf. Technol. 86, 3067–3080 (2016). https://doi.org/10.1007/s00170-016-8431-9

So I dug into how to get Fusion360 to make back (backside, bottom chamfering, etc.) chamfers. And unfortunately, it’s not simple or straight forward. And in all honesty, the information seems to be stagnant out there. The best resource for Fusion 360 I’ve found has been NYC CNC, great guys and very informative content. They have a great, although dated, video ( https://youtu.be/HsBR2_6h4mM ) of how they have tackled the problem of back side chamfering if you want to see where I am starting from.

Jeevan, T.P., Jayaram, S.R., Afzal, A., Ashrith, H.S., Soudagar, M.E.M., Mujtaba, M.A.: Machinability of AA6061 aluminum alloy and AISI 304L stainless steel using nonedible vegetable oils applied as minimum quantity lubrication. J. Braz. Soc. Mech. Sci. Eng. 43, 1–18 (2021). https://doi.org/10.1007/s40430-021-02885-x

Brice, J., Moungomo, M., Kibouka, G.R., Nganga-kouya, D.: Influence of heat treatments , parameters and machining conditions on machinability in the turning of recycled 6061 aluminum alloy. J. Manuf. Mater. Process 5, (2021). https://doi.org/10.3390/jmmp5020037

Lei, S., Shin, Y.C., Incropera, F.P.: Deformation mechanisms and constitutive modeling for silicon nitride undergoing laser-assisted machining. Int. J. Mach. Tools Manuf. 40, 2213–2233 (2000). https://doi.org/10.1016/S0890-6955(00)00051-1

6061 aluminummachinabilityrating

Rahman Rashid, R.A., Sun, S., Wang, G., Dargusch, M.S.: An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy. Int. J. Mach. Tools Manuf. 63, 58–69 (2012). https://doi.org/10.1016/j.ijmachtools.2012.06.004

Sánchez, J.M., Rubio, E., Álvarez, M., Sebastián, M.A., Marcos, M.: Microstructural characterisation of material adhered over cutting tool in the dry machining of aerospace aluminium alloys. J. Mater. Process. Technol. 164–165, 911–918 (2005). https://doi.org/10.1016/j.jmatprotec.2005.02.058

Panjehpour, A., Soleymani Yazdi, M.R., Shoja-Razavi, R.: An experimental investigation of pulsed laser-assisted machining of AISI 52100 steel. Opt. Laser Technol. 63, 137–143 (2014). https://doi.org/10.1016/j.optlastec.2014.03.018

Just for clarity I will be using the ASME Y14.5 standard (section 1.8.16) for chamfer dimensioning. That is, where the called out dimension is the opposite or adjacent side of a triangular chamfer, and not the hypotenuse.

The laser system used for this study was established through Department of Science and Technology, India under project number DST/TDT/AMT/2017/026.

This is where this method really shines, when we use our new form tool and create a 2D contour or Trace or pocket for chamfering we don’t need to apply any hacky work arounds in the “stock to leave” box or play with the contour height selection, or even need to make a template tool path, it just works! Select the 2D or 3D contour that requires a chamfer and you’re good.

Machining gradealuminium

On the same plane, create a new sketch and draw out HALF of the tool’s profile with the sketch origin being on the tool’s centerline.

Demir, H., Gündüz, S.: The effects of aging on machinability of 6061 aluminium alloy. Mater. Des. 30, 1480–1483 (2009). https://doi.org/10.1016/j.matdes.2008.08.007

Laser assisted turning (LAT) is emerging as a significant process for machining various materials. In this study, experimental analysis is carried out to investigate the machinability of the aluminium 3003 alloy during conventional turning (CT) and LAT processes. The effect of laser beam irradiation on machining performance is analyzed and compared with the CT in terms of machining forces, chip morphology, and surface roughness. The results showed that in comparison with CT, the cutting, thrust, and feed forces could be reduced significantly in LAT. However, these forces were found to be increased at other than optimum laser power. It was pretty interesting to observe that the cutting, thrust, and feed forces were increased at high laser power. Surface roughness was also found to be higher in LAT than that in CT. Chip morphology analysis showed that the discontinuous and thick chips are observed at high laser power, whereas continuous and small chips are observed at low laser power, while continuous and long chips are obtained for CT. The presented results are important for manufacturing industries seeking to improve the machinability of the materials.

Kalantari, O., Jafarian, F., Fallah, M.M.: Comparative investigation of surface integrity in laser assisted and conventional machining of Ti-6Al-4 V alloy. J. Manuf. Process. 62, 90–98 (2021). https://doi.org/10.1016/j.jmapro.2020.11.032

Authors confirm that the data and material supporting the findings of this study are available within the article. Raw data are available from the corresponding author upon reasonable request.

When we create the form tool we select the tool profile we created, select the axis of rotation (arrow points down), and most importantly select the compensation point we just created. And that’s it! The new form tool is in your tool library.

Deswal, N., Kant, R. Machinability Analysis During Laser Assisted Turning of Aluminium 3003 Alloy. Lasers Manuf. Mater. Process. 9, 56–71 (2022). https://doi.org/10.1007/s40516-022-00163-9