BrickTactical Knives Pack - brick tactical
American watchmaking used to be very prominent but as many things do, that changed and for the most part, was a thing of the past, that is up until the past 8 years or so. Many brands, especially start-up or microbrands are assembling their watches in the USA, including brands like Nodus and Lum-tec. A few brands are actually machining the cases and even making movements in the US, most notably Weiss and RGM. Somewhere in the middle is the Vero Watches SW, one of 3 models made by the Portland, Oregon brand. The watch cases are machined in Portland, as well as the dials and hands. The crystal, movement, and strap are outsourced, but all assembly takes place in Oregon as well. While not fully made in the USA, it is a step in the right direction and a path to a full American-made watch.
These are all product developments that could feasibly be added to CAM Assist in the near to medium term - increasing our solutionâs utility even further and helping make machining more efficient, and lower touch.Â
As I stated earlier, this Vero Watches SW feels great on the wrist and has a nice comfortable profile. There is an issue with the strap though, beyond it just showing all the lint or dirt it catches. It is a pain in the ass to put back on. There is just no other way to say it. Drilled lugs or even quick change pins would have made this a lot easier, but I will caution everyone and say, if you like the silicone straps, just leave it on, or if you must switch it out to something else, do not plan on putting the silicone back on for a considerable time. You just do not want the constant aggravation.
However, I am positive about the possibilities of this being achieved, not least because of our own experience: 8 years ago, when we started making CAM Assist, no-one would have thought weâd have got anywhere close to what our software can do today.Â
Itâs incredibly simple to go from pulling it out of the box to first print. (Going from unboxing to the first component off the laser cutter took less than 5 minutes; the same test for the 3D printer was 1 hour for set up, and another 2 hours for a print to complete.)
At first glance, the Vero Watches SW looks like a standard sports watch, and for the most part, it is. As you turn the watch though, that is where you see its sleek curved profile. The curved case not only adds to the aesthetic but allows the watch to wrap around your wrist. The SW is thin and coming in at 41mm can be worn by most anyone, even those with small wrists. It also allows for it to be worn easily under any shirt or jacket cuff and because of the silicone strap, the entire watch is very lightweight, to the point you will forget you wearing it, much like a classic square G-Shock.
Today, there is a 3D printer and a laser cutter in the CloudNC office. There are almost no restrictions on what a new employee can make with it - they can essentially design anything, and they could do so without any considerations about optimising the design for manufacture, and the printer will make it with one click (as long as itâs filled it up with resin).Â
What I would like to be able to happen is to be able to go walk up to the CNC machine and have as much of that process automated as possible. Standard tools are already set up, the software already knows feeds and speeds, and it can already work out how to program most of the machining of a part so thereâs just a little bit of tidying up to do. Basically, I want the software to lead me through the journey of making a part as much of the way as possible - really, like 3D printing software does.
Our first software solution, CAM Assist, represents our first steps along the path of making that happen: it autocompletes around 80% of the CNC machine programming process, enabling manufacturers to save time and effort.Â
I've been an avid watch lover since the age of 7. Watches are not only my hobby but a passion. My favorite style used to be dive watches, but field or non bezel watches have been growing on me. When I'm not reviewing watches I am either cooking or with family and friends.
As many know if you read or watch my reviews, I do not mince words. This is a review after all. The biggest selling point to this Vero Watch is the fact that a good portion of the watch is being made right here in the good ol’ USA. Not just a strap or a small part, but the case and dial. That is a pretty big deal in my book. Now, for some, it may not mean that much, but bringing any kind of manufacturing back to the USA is a good thing and while Vero is still a small company, who knows where this can lead to. This particular watch is not really my style and as such, not something I would regularly wear. I can tell a lot of time and money went into producing this watch and for that I commend them. That is no small feat to actually bring this to market. It is just not my style, but they all cant be and I would be lying to you if I said they were. That said, it is a cool looking watch and yes, I think some improvements can be made going forward but I appreciate what they have done and look forward to seeing many more models from them in the future.
Now, CAM Assist is the first step on the way to that goal - but there should be no illusions, achieving this in total is several years away at least.Â
And, of course, on the way to achieving single-click manufacturing - whenever that might be - thereâs a huge amount of value we can add along the way that will make it easier and easier for a workshop owner or machinist to manufacture complex parts and components.Â
Letâs assume they get through that stage and have pressed the go button - job done, right? Not at all - they now need to watch the machine make their component (called proving out the program, or proveout for short) as if theyâve made a mistake then theyâre going to potentially break an extremely expensive bit of kit - perhaps the cutter, perhaps the machine itself. Ultimately itâs pretty hard to break a 3D printer - but itâs not that hard to crash a CNC machine.Â
At its core CAM Assist is like a machining technician. It has a practical understanding of the physics and processes of cutting metal so it can make the sort of decisions that a machinist would make.


The inspiration for CloudNCâs existence was my desire to make manufacturing anything as easy as it is to 3D print something.Â
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More
If any of these advances especially excite you - or if there are obvious omissions that you think we should be working on instead that would make a real difference to your operations - let me know: weâd love to get a clearer view of what use case improvements really matter to machinists around the world!Â
Fundamentally, I believe that precision machining today is a bottleneck in the manufacturing process that prevents us from making parts and components efficiently and easily - preventing innovation and global economic growth.Â
Presuming they can get the right tool for the machine, they then need to go into their CAM package and tell it what size and shape it is, and what the cutting parameters are - which means they need the manufacturerâs handbooks for each tool theyâre using. So already, just to set up the machine for one tool, youâre at the point where you require a lot of expertise to know how to do that correctly.Â
But whatâs stopping CAM Assist from doing the whole journey today - and what do the next steps in the journey towards one-click manufacturing look like? Letâs find out.Â
Powering the Vero is the Swiss Sellita SW200 automatic movement, a movement we have seen in many upstart and microbrands all the way to watches brands such as Oris, Christopher Ward, and many others. This watch does not show off the movement but rather highlights their matching capabilities with a really sleek case back that reminds me of something you would see on a military airplane. Notice it is held down with screws. This is interesting to me if for nothing else than this watch is also 200 meters water resistant and it is achieving that without a screw down case back or crown. Speaking of the crown, while it does not screw into the case, it does sit mostly flush until you pop it out and the aggressive knurling allows for easy time setting.
Ideally, of course, the dream would be more all-encompassing - you could have a machine with a couple of hundred tools in it, combined with flexible work holding, and software that knows how to machine almost anything: meaning the set up is automatic (with error-checking built in). That means a lot of the expertise needed today to make the simplest part isnât required for everything - and brings you closer to the single-click vision.Â
The intent behind the Vero Watches SW I believe is to be an all-around sports watch, one that could act as a field watch, your weekend watch and your casual watch all in one. While the fitted silicone strap looks good, a nice leather strap would probably look even better. More on the strap in a bit. The case machining is beautiful, especially the satin finishing on the sides, and to give a little contrast, a high polish on the top. For me, I would prefer an all brushed case or even a bead blasted case, not only would it reduce fingerprints but would also give it a more “tool” like appearance.
And then if they actually want to make the component they want, they need to program every move effectively by hand, as well as figuring out how theyâre going to hold the stock in the machine. Simple things like âHow am I going to cut the back of the component offâ can be actually quite complex and time consuming to solve.Â
In contrast, if that employee were to do that in our factory in Chelmsford with a CNC machine, they would get stuck very very quickly. To start with, the machine interface isnât intuitive, and requires training. Then, weâll likely need to make changes to the tooling and workholding, and itâs not easy to change them.
The dial is familiar and not very distinctive, but the is made completely in Vero’s workshop. Nickel plated brass, coated in black ceramic with a nice subtle texture. Keeping things clean and simple, the hands are white and black and a dark orange second hand gives some much-needed contrast. The website states the numbers and markers are printed 6 times, unfortunately, they are only printed in white and do not have any lume. The hour and minute hand are lumed and glow decently well, but I feel it was a missed opportunity to not at least lume the larger Arabic numerals.
18581906093