automotive world … - carbide insert production

Aimed squarely at the job shop market, the QT-Ez is “putting Mazak quality and reliability within reach for virtually any shop with productive, space-saving efficiency at an affordable price,” according to Greg Papke, vice president, sales and marketing for Mazak’s Advantec Product Group. The QT-Ez fills a niche right below Mazak’s ubiquitous Quick Turn machines.

CNC turning, on all of its machine platforms—Swiss, conventional and multitasking—is getting smarter, faster and more versatile through cleverly designed tools and software combinations. Which companies and solutions are vying for leadership all depends on what knotty problem is being addressed.

Thrift Edge—approaching from the side, this inserted tool will profile the part. Think multiple grooves, cornerbreaks/radii, similar to a piston (four grooves at once).

“The Multidrill was once thought to be miles away from commercialization. Now I recall this time with fondness. It is true that I have striven to bring dreams closer to reality with my colleagues, navigating many twists and turns. I have acquired substantial knowledge. My next challenge is to contribute to the evolution of the Multidrill by transferring my knowledge to many people,” says Mori.

GWS offers a number of profiling products, each featuring quick change replaceable heads and adjustable movements. They include:

For multitasking processing capability, Papke cites the QT-Ez’s milling and Y-axis off-centerline capability. “For still more productivity, QT-Ez machine seamlessly integrates with a range of automation solutions. These include simple bar feeders and parts catchers as well as full cooperative robot installations such as Mazak’s Automation Systems Cobot Cell,” Papke says.

For Hainbuch America Corp., Germantown, Wis., the acquisition of Vischer & Bolli Automation (VBA) expanded the automation technology available for turning and milling robot cells. VBA robot cells for turning and milling small parts up to 10 kg, VBA Robilo cells for 80-kg workpieces and even modular cells as large as 500 kg are available.

Walter’s latest innovation is the Tiger-tec Gold CVD grade, which can be used for applications from low-carbon steels to high-alloy steels. Steel and cast-iron solutions are closely related.

Increased feed rates put greater stress on machine tool components. Feed rate is directly proportional to metal removal rate and higher metal removal rates place larger demands on the machine tool spindle. However, round positive style inserts generally are softer cutting, so in most cases trochoidal turning is suitable for lower power machines.

Targeting the growing market for high-mix/low-volume production of small and slender precision parts, Mazak has introduced its Syncrex series of Swiss style machines also manufactured in the Florence facility. The Syncrex machines feature improved design for machining of smaller parts from 12'- (3.66 m-) long bar stock in diameters of 1.5" (38.1 mm) or less. The series features one-piece-polymer, casting-machine base that is said to be 10% more rigid than cast iron with thermal control that reduces part variation by 25%. In addition, Mazak Dynamic Chip Control reduces long, stringy chips that can foul tooling and mar surface finishes, according to the company.

In 1984, after a two-year development period, production and sale of the Multidrill commenced. The market enthusiastically welcomed the product. The Multidrill was selected successively by a number of customers, including major automakers and demand for it grew rapidly. Compared with the conventional high-speed steel drills, the Multidrill boosted machining efficiency 4- to 10-folds, enabling drastic productivity improvement in machining. Nonetheless, a drill is a cutting tool that may in some cases fail to demonstrate its true performance depending on the machine with which it is used, the condition settings, and usage. As a solution to this matter, they promoted educational activities such as visits for users, the development and provision of a training framework and the holding of training seminar. These efforts spurred the widespread use of the Multidrill. More importantly, it was significant to build a service network. During use, the cutting edges of a drill wear and become ineffective in cutting. To use the drill again, the cutting edges need to be re-sharpened to return them to their original condition. Naturally, the quality of the re-sharpened cutting edges must be as good as those of a brand new drill. At the same time, customers demand that they provide the service at low cost and within a short delivery schedule. To meet these challenges, they built a new model of a re-sharpening network by establishing a partnership with grinding service companies across Japan. Additionally, they worked on the development of re-sharpening equipment and provided programs to machine manufacturers.

A combination of more capable modern machine tools and sophisticated CNC programming are driving the search for improved part quality. All-directional turning enables finishing complex shapes in a single cut without blend points. Wiper inserts can be kept perpendicular to the surface to also produce a wiper effect on tapered surfaces, the company says. In Y-axis turning, the main cutting forces are directed into the machine spindle, offering high process stability. Maintaining a constant entering angle during machining means chips can be optimally controlled.

In more than 80 years of the history of cemented carbide, the development and launch of cemented carbide drills was an epoch-making event, which enabled machining in the manufacturing industry to undergo a remarkable evolution. In the area of drilling, it had been believed difficult to use cemented carbide for strength reasons. In 1982, Yoshikatsu Mori (presently, Senior Engineer at Sumitomo Electric Hardmetal Corp.) daringly met this challenge.

GWS’s form tools include all geometries and angles of the workpiece. Carbide form tools allow more intricate profiles with tighter tolerances and improved cutting geometries, resulting in two to three times faster cycle times, Freeze says. Form tools that replace multiple IC indexable inserts reduce the chance of error and improve tool life, with form tools lasting for 1,500 to 5,000 parts compared with only several hundred for IC indexable inserts. Form tool life is two to three times that of single point tooling, according to Freeze.

Absolute Machine Tools’ solution is offering three of its CNC turning machine lines with CNC control options that feature oscillation cutting. All three Absolute brands—Nexturn Swiss machines, LICO CNC screw machines and Quick Tech hybrid-production turning machines—feature either the Mitsubishi CNC or the FANUC CNC with their oscillation cutting technology capability called Vibration Cutting Control (VCC) and Servo Learning Oscillation (SLO), respectively.

As the name implies, the new method makes use of the Y-axis and all three axes used simultaneously when machining. The tool rotates around its own center. The insert is placed for machining in the Y-Z plane and the milling spindle axis interpolates during turning. This allows intricate shapes to be machined with a single tool.

Chip control, especially for difficult-to-machine and so-called “gummy” materials, is always a prime target for ways to break bird-nesting chips into easy-to-handle, tiny, steel-mimicking chips. Unique, high-frequency cutting capability on CNC controls is leading the way. New tooling concepts for high-volume turning operations and automation are always welcomed into shops looking to increase productivity or enter into new markets.

Trochoidal turning is essentially separated into two strategies: “simple” done on conventional turning machines, and “simultaneous” performed on machines with B-axis movement. These turning strategies are similar to trochoidal milling, which combines a spiraling cutting path with straight-ahead motion. Turning similarly features lower depths of cut, higher feeds and faster cutting speeds than conventional turning.

“One mechanism is achieved by introducing elasticity with a layered coating that includes TiCN that helps resist crack formation. Additional grain-oriented Al2O3 coating layers further improve crater wear resistance, allowing the grades to run much faster cutting speeds. The benefits to the shop are high process reliability, excellent surface finish and dimensional stability over the production run of steels or cast irons,” Garud says.

To learn the ins and outs of the shop’s turning application, Garud advocates an extensive checklist of questions about a shop’s process capabilities and operations. What kind of machine? How old? How robust? What kind of cut finishing/medium/roughing? Interrupted or not? Coolant? Material (steel, cast iron, stainless)? Difficult to machine? Chip control, chip breaker?

Cutting tools that can improve quality, reduce cycle time and handle the most complicated shapes and pockets are difficult—if not impossible—to find, unless you are looking at the latest iteration of all-directional, Y-axis turning with a single tool from Sandvik Coromant US, Mebane, N.C. The Y-axis turning method continues to add to the company’s earlier capabilities, such as its all-directional Prime Turning, non-linear turning and interpolation turning.

To Vitullo’s way of thinking, the seamless connection is a major enhancement for machine-tool builders when it comes to adding processes like skivving, hobbing, grinding and other processes for customers. Adding functionality is a matter of opening up cycles and filling in the blanks. Simulation on the SINUMERIK ONE control helps operators know what’s going to happen when they run a complex part, Vitullo notes.

“The difference between the two is that FANUC uses software to achieve its high-frequency cutting action, while Mitsubishi uses hardware to achieve the same results,” Zunis says. “The technique is achieved by oscillating the cutting axis at a frequency in the kilohertz range. It isn’t something that you can easily program using traditional programming practices. The action is to feed a little bit in any axis that is cutting, dwell or reverse a little, then feed a little more, then dwell and reverse, etc. A traditional program would be extremely long and labor intensive to prepare.”

ThriftTurn—approaching from the end, this two-flute inserted tool will profile the part with the ability to adjust each insert independently. Think face, radius/angle and a thread blank, similar to a welding tip.

“Turning is very specific,” Garud notes. “Everything matters and there are many parameters to consider. It all comes down to feeds and speeds and how our newest technologies fit the application’s specific requirements.

Standard round turning inserts increase toolpath flexibility and permit smooth entry and exit from the workpiece. The insert is always in the cut, eliminating the time lost returning to a set point after every pass. Trochoidal turning performs longitudinal and face turning as well as radial and axial grooving. Because of the possibility of using high feed rates to get good chip breaking, the approach is also beneficial when turning soft but tough ductile materials that normally produce long chips that endanger operators and wrap around the tool.

“The biggest challenges that shops face are still feeds and speeds, chip breaker and chip control, tool life and productivity improvement,” Garud notes. “Multilayer coating technology has introduced sophisticated ways to combine single coatings into multilayer coatings to target specific machining problems. So instead of a single layer of TiCN, AlTiN, Al2O3 and TiAlN, multilayers of these coatings used in various combinations and thicknesses are able to reduce cracking that leads to tool breakage and flaking. A cobalt enriched substrate also adds to a tough substrate, further preventing chipping while not compromising the hardness and high-speed capabilities of the grade.

“For example, I have this complex part, and what I’m doing is opening up cycles and filling in the blanks adding turning to a mill,” he continues. “Tool orientation is managed by the cycles and the cycles manage the tools so I don’t have to. All I have to do is run the part. Visualization will show what’s going on.”

Development of CNC control technology for multitasking machines brought turning and milling together on one platform for Siemens, according to Daniel Vitullo, business development territory manager for Siemens Industry Inc., Elk Grove Village, Illinois. “We developed turning and milling on a single platform, which makes transition from one technology to the other seamless,” he says. “Whether a turn-mill or a mill-turn, depends on which is primary functionality.”

Before the development of cemented carbide in Germany, most cutting tools were made of high-speed steel. Cemented carbide enabled cutting tools to evolve into ultra-hard tools. Cemented carbide is a composite material produced by mixing and sintering hard tungsten carbide and cobalt. The material features high hardness, high wear resistance and high heat resistance. It enables machining at a higher speed than high-speed steel. Cemented carbide innovated the cutting process. The world’s first cemented carbide was invented in Germany in 1923. It was launched into the market in 1927. Sumitomo Electric began to study the material in the same year. In 1928, the Company successfully developed a prototype wire-drawing die (a tool used to finish wires to a specified diameter) made of cemented carbide. In 1931, cemented carbide cutting tools were commercialized under the brand “Igetalloy™.” Since then, Igetalloy™ has evolved into an extensive range of products to fulfill all kinds of machining needs covering turning, milling, end milling and drilling.

Applications for profiling with form tools include aerospace components, automotive workpieces such as bearings and shafts, hydraulic components, medical components and industrial products.

“You can eliminate fear about running a complex part because all the travels, axis values and centers of operation are set up the same as the physical machine,” he continues. “By combining cycle support and the digital twin, you get almost a fully closed loop process from development and testing of the part to running the part. The only thing that’s missing in this scenario is inspection.”

Few among us would turn down turning results that produce a much higher metal removal rate when cutting difficult-to-machine materials such as stainless steels and nickel and titanium-based alloys. That is the promise of trochoidal turning, a machining strategy in which tool paths and the entry and exit movements are optimized to maximize metal removal rates. The simultaneous use of different axes in combination with round indexable inserts and advanced CAM software are the keys to trochoidal turning’s success.

Another important benefit of form tooling is that with all geometries and profiles of the part in the form tool, inspection can be done without checking every feature. “First and last piece inspection (per insert change) are enough to guarantee that all the parts in between were up to spec,” Freeze says.

“The development of cemented carbide drills began with their application to castings and other relatively easy-to-drill materials. In the late 1970s, cemented carbide drills that could machine steel began to come into wide use. These drills had a steel shank for tool mounting purposes and spiral flutes with a cemented carbide cutting edge brazed at the tip, and were 12 mm or more in diameter. However, a survey of how high-speed steel drills were used revealed that an overwhelming proportion of them were mostly 10 mm or less in drilling diameter. Therefore, we undertook a development project envisioning the development of small-diameter drills at first, and then applied the results to large-diameter drills,” says Mori.

* The concept of connecting a myriad of things to the Internet for information exchange in order to convert things to data and advance automatization based on the data, and thus creating new value.

A significant piece of the machining puzzle is provided by the Digital Twin that resides within the SINUMERIK ONE CNC. “We’re not talking about conventional two-axis lathes. These machines represent million dollar and more investments in advanced machining technology,” Vitullo points out. “Our digital twin is native to the control. It simulates the operation of the multitasking machine. If I flip a tool around, the digital twin will recognize it and simulate the operation of the machine.”

Finding cutting solutions for precision turning applications—whether for conventional CNC, multitasking machining of complex workpieces or high-volume, Swiss-style production—means considering all relevant parameters of the application, says Sarang Garud, product manager, turning, drilling, boring, Walter USA LLC, Waukesha, Wisc. “I don’t take the shotgun approach. I prefer the rifle when it comes to formulating a cutting solution strategy with our latest technologies,” Garud says.

Both controls are actuated by G-code, Zunis adds. There is a syntax that tells the number of vibrations, the frequency, the length of cut and how far the tool moves in one rev of the spindle. “Experience will help determine parameters to get in the ballpark,” Zunis continues. “It’s related to how far the tool moves in one revolution of the spindle to the feed rate. You want to break the chip at least once per revolution. That’s a good starting point. Some materials you can go around hundreds—or even thousands—of revs before chips become a major problem. Oscillation cutting capability works well on smaller machines where chips can have a major impact on machine operations.”

Walter’s turning tools cover ISO turning, grooving and parting off, as well as thread turning. Precision turning tools, boring bars and parting blades are available with standard ISO square shanks, as well as with all interfaces that are standard in turning applications.

For CNC turning, whether Swiss-style or multiple spindle machines, GWS Tool Group, Nashville, Tenn., has developed a custom profiling inserted tooling system that replaces standard, single-point indexable tools with form tools. Cycles on CNC machines are reduced by replacing single-point tooling with toolholders that hold form or profile tooling that make a plunge move rather than making several passes with IC indexable inserts.

The benefits of highly engineered form tooling for turning include shorter cycle times, fewer tools, reduced number of setups and significantly improved tool life, according to Johnny Freeze, business development director at GWS.

Two new tools have been developed to support Y-axis turning. The new CoroTurn Prime variant is suitable for shafts, flanges and components with undercuts. The CoroPlex YT twin-tool, featuring CoroTurn TR profiling inserts and CoroTurn 107 round inserts with rail interface, can be used for components with pockets and cavities.

When it comes to turning machine solutions, it’s hard to argue with Mazak Corp., Florence, Ky. The company supplies sophisticated Integrex five-axis, multitasking machines to produce complex workpieces for aerospace, as well as its most recently introduced QT-Ez 12MY multitasking systems.

ThriftPoint—approaching from the end, this single flute inserted tool will profile the part with the support of a bushing. Think face, radius/angle, similar to a needle valve.

Vitullo says, “It’s physically the SINUMERIK ONE control which is driving the machine, and the digital twin is driving that simulation with the same control. The digital twin and the physical machine use the same parameters and settings, this also includes travel limits and drive settings. For us, the digital twin is a true real-world simulation. This means when using the SINUMERIK ONE digital twin you have full-cycle support. If you call up the cycle for drilling or high-speed milling, the machine operator doesn’t have to guess about the outcome. What happens in simulation is what will happen at the machine. It’s not your machine’s control. What most others do, they look at how our cycle works and they emulate it off the code from the post we run the same cycle in both simulation and at the machine,” Vitullo explains.

Y-axis turning can also be used in static mode with a locked spindle for flexible two-axis turning with fast insert indexing. The method is suitable for all materials and requires a multitask machine, turning centers or vertical lathe with options to allow interpolation of the milling spindle axis during turning.

Software provider Open Mind Technologies AG engineered hyperMILL software to expedite trochoidal turning on conventional CNC turning machines, enabling easy programming of trochoidal turning on standard three-axis turning machines. Using a multitasking machine with B-axis capability enables a shop to take full advantage of the benefits of trochoidal turning strategies.

With the expanded expertise in automation, Hainbuch is able to support its customers throughout the entire manufacturing process. The modular design of the cells lends itself to choosing the extent of functionality. Options include pallet-, workpiece- and toolholder-handling systems, as well as a master computer for entire cells.

Manufacturing processes can be completely flexible with the automated changing of mandrels and chucks. Clamping device changeover includes zero-point clamping systems for both turning and milling. In addition, Hainbuch’s intelligent IQ clamping devices, both as a chuck for O.D. clamping and as a mandrel for I.D. clamping, facilitate upstream and downstream measuring processes. Workpieces are continuously measured for diameter, temperature, workpiece contact and clamping force. Measurement data are relayed to the machine controller for analysis via contactless data and energy transmission, closing the production loop.

Applications for trochoidal turning include high-volume production operations such as manufacturing traditional automotive components, including axles and shafts.

Chip breakage of exotic materials, stainless steels and those with high nickel content is always a challenge in turning operations, according to David Zunis, director of service and applications engineering, Absolute Machine Tools, Lorain, Ohio. “When turning these materials, chips tend to ball up and nest up, leading to insert and tool breakage, causing all kinds of problems, including broken tool arms for cutoff detection. The best condition you can have is breaking those chips into tiny little chips so that they fall away much like chips for carbon steel,” Zunis says.

Programming the additional axis is somewhat more complex than that for a three-axis machine, but the moving axis provides greater accessibility when turning complex parts and as a result is faster and more efficient. The round inserts combined with light depths of cut and the ability to rotate/swivel the cutting tool relative to the workpiece axis effectively creates more cutting edges and increases tool life. Regarding insert geometry and style, global toolmaker Ceratizit Inc. typically recommends its RCMT and RCGT inserts for trochoidal turning and GX24 inserts for trochoidal grooving using 4-6 mm nose radii and M3 chip breakers.

Drills differ from other cutting tools in that they need to additionally have the function of evacuating chips produced during cutting from the bottom of the hole. This was the inhibiting factor in developing a cemented carbide drill. One essential requirement for drills in machining is that they do not break. If chips are not evacuated, the drills will break. To clear chips smoothly, the flutes must be wide. If wide flutes are provided, it will result in an accordingly reduced cross-sectional area, and the drill will decrease in strength. In summary, the point was how to enlarge the cross-section of the drill for improved strength and remove chips smoothly through the narrowed flutes. This was the most difficult challenge. “We took note of the chips. Large chips become stuck in the flutes of the drills. However, short and thinly cut chips are smoothly ejected. Through repeated prototype development and evaluation processes, we discovered that by adopting an arc-shaped cutting edge, it was possible to produce short and thinly cut chips for smooth evacuation. This was the most significant breakthrough in developing cemented carbide drills,” recalls Mori.

Productivity improvement and cost reduction have long been on the list of the most important challenges to the manufacturing industry. Rapidly advancing technological innovations, such as information and communication technology (ICT), served as an engine to meet these challenges. Currently, attempts are made to innovate the manufacturing industry with further considerations for high efficiency, labor saving and reduced environmental burdens with the keyword being “Internet of Things (IoT).”* For example, things such as factory facilities and equipment are connected to the Internet for data acquisition and analysis. These efforts are undergoing acceleration to enable productivity improvement. In other words, the goal is to realize a connected or smart factory, by virtue of IoT. This is known as “Industry 4.0” or the Fourth Industrial Revolution. The Sumitomo Electric Group has contributed to productivity improvement and cost cutting by providing an extensive range of cutting tool products made of cemented carbide, cubic boron nitride (CBN), and sintered diamond to name a few. Among these products, this feature article focuses on the Multidrill. In 1984, Sumitomo Electric launched the Multidrill into the market, a revolutionary product that brought innovation to manufacturing industry on a global scale. The following introduces the untold development stories, the present and future prospects of the Multidrill.