Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/16" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/32" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/32" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 5/32" 42 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 2-1/2" Bore diameter 1" Thickness 1/64" 62 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/8" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 1/4" 40 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/32" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 3/64" 128 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 2-1/2" Bore diameter 1" Thickness 1/32" 64 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/32" 34 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 100mm Bore diameter 1" Thickness 3.0mm 44 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 1/32" 42 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 3/32" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 2-1/2" Bore diameter 1" Thickness 3/64" 64 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/8" 100 teeth

WuxiJiangsu postal code

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 5/32" 42 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 1/4" 40 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 100mm Bore diameter 1" Thickness 1.0mm 56 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 3/32" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 5/64" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 3/16" 42 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 75mm Bore diameter 1" Thickness 2.0mm 40 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 3/16" 76 teeth

NanjingJiangsu postal Code

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 3/64" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 2-1/2" Bore diameter 1" Thickness 3/64" 64 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 75mm Bore diameter 1" Thickness 2.0mm 40 teeth

Jiangyin CityJiangsuprovince Chinapostal code

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 8" Bore diameter 1" Thickness 1/16" 54 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 5/32" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 3/64" 76 teeth

Metal Slitting Saws Used for deep-slotting of Steel and Cast Iron --- also cast Brass and Aluminum and similar hard non-ferrous metals

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 5/32" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 5/32" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 100mm Bore diameter 1" Thickness 4.0mm 44 teeth

Jiangsu postal codemap

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 3/32" 34 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 8" Bore diameter 1" Thickness 3/32" 54 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 7/64" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 5/64" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 1/16" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 1/16" 42 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 3/32" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 2-1/2" Bore diameter 1" Thickness 1/16" 64 teeth

Jiangsu Flag Chemical Industry Co., Ltd. (FLAGCHEM) is a professional manufacturer of generic agrochemicals including both technical grade and end use products.

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/4" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 1/16" 42 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 3/16" 42 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 7/32" 42 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 1/8" 46 teeth

Zhangjiagang Cityjiangsuprovince china zipcode

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 3/16" 34 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 100mm Bore diameter 1" Thickness 1.6mm 56 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/64 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 2-1/2" Bore diameter 1" Thickness 1/16" 64 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 2-1/2" Bore diameter 1" Thickness 3/32" 64 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/8" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 100mm Bore diameter 1" Thickness 4.0mm 44 teeth

SuzhouJiangsu postal code

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/8" 34 teeth

ChangzhouJiangsu postal code

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 3/16" 150 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 3/64" 42 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 1/16" 150 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/64" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 160mm Bore diameter 32mm Thickness 1.6mm 80 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 3/16" 150 teeth

Metal Slitting Saws Used for deep-slotting of Steel and Cast Iron --- also cast Brass and Aluminum and similar hard non-ferrous metals

Contact Details: Purchase the Jiangsu Flag Chemical Industry Co.,Ltd. report to view the information.

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 7/64" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/64 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 5/32" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 5/64" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 1/16" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/8" 34 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/64" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 7/32" 34 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 1/16" 128 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/16" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/32" 34 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 75mm Bore diameter 1" Thickness 1.0mm 40 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 5/64" 46 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 1/32" 150 teeth

Metal Slitting Saws Used for deep-slotting of Steel and Cast Iron --- also cast Brass and Aluminum and similar hard non-ferrous metals

Kunshan CityJiangsuchinapostal code

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 3/16" 46 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 3/16" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/16" 34 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 7/64" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 3/64" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 1/8" 150 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 8" Bore diameter 1" Thickness 1/8" 200 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 5/64" 46 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 100mm Bore diameter 1" Thickness 0.8mm 56 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 3/64" 42 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 7/64" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 1/32" 42 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/8" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 8" Bore diameter 1" Thickness 1/8" 200 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 3/64" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/16" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 7/32" 34 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/32" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 1/16" 128 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 8" Bore diameter 1" Thickness 3/32" 54 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 3/64 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/32" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/8" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 75mm Bore diameter 1" Thickness 4.0mm 36 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/32" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 2-1/2" Bore diameter 1" Thickness 1/64" 62 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 3/32" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 100mm Bore diameter 1" Thickness 1.0mm 56 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/8" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 3/64" 128 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/64" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 5/64" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 100mm Bore diameter 1" Thickness 2.0mm 56 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 2-1/2" Bore diameter 1" Thickness 3/32" 64 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 7/32" 42 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 8" Bore diameter 1" Thickness 1/16" 54 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 100mm Bore diameter 1" Thickness 3.0mm 44 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 3/16" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 5/64" 150 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/16" 28 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/64" 76 teeth

Metal Slitting Saws Used for deep-slotting of Steel and Cast Iron --- also cast Brass and Aluminum and similar hard non-ferrous metals

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 160mm Bore diameter 32mm Thickness 1.6mm 80 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 1/32" 150 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 100mm Bore diameter 1" Thickness 0.8mm 56 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 100mm Bore diameter 1" Thickness 1.6mm 56 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 1/8" 46 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 3/64 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 5/32" 100 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 1/8" 128 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 1/16" 150 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 5/64" 150 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 1/8" 150 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 3/64" 150 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/16" 76 teeth

EMIS company profiles are part of a larger information service which combines company, industry and country data and analysis for over 145 emerging markets.

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 2-1/2" Bore diameter 1" Thickness 1/32" 64 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 3/16" 76 teeth

Metal Slitting Saws Used for deep-slotting of Steel and Cast Iron --- also cast Brass and Aluminum and similar hard non-ferrous metals

23 Olive Road, PenrosePO Box 112114 Auckland 1642Phone: (09) 525-8900Freephone: 0800 4 TOOLSEmail: sales@tradetools.co.nz

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 5" Bore diameter 1" Thickness 1/8" 128 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 3/16" 34 teeth

Headquarters No. 309, Changfenghe Road, Chemical Industry Park, Nanjing, Jiangsu Province Nanjing; Jiangsu; Postal Code: 210047

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 75mm Bore diameter 1" Thickness 1.0mm 40 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 75mm Bore diameter 1" Thickness 4.0mm 36 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 3/64" 150 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 1/16" 34 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/16" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 5/32" 34 teeth

Metal Slitting Saws Used for deep-slotting of Steel and Cast Iron --- also cast Brass and Aluminum and similar hard non-ferrous metals

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 100mm Bore diameter 1" Thickness 2.0mm 56 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 3/32" 34 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 6" Bore diameter 1" Thickness 3/16" 46 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 3" Bore diameter 1" Thickness 1/4" 76 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 5/32" 34 teeth

Hollow Ground for clearance in deep cutting, these saws are used for slitting and parting off operations. M-2 Grade High Speed Steel Designed for general slotting or cut-off operations. Suitable for all kinds of steel, also non-ferrous metals and plastics. Ground tooth profile. Diameter 4" Bore diameter 1" Thickness 5/32" 100 teeth